Role of preparation parameters of Cu–Zn mixed oxide catalyst in solvent free glycerol carbonylation with urea

A Green Approach to Obtaining Glycerol Carbonate by Urea Glycerolysis Using Carbon-Supported Metal Oxide Catalysts

The results of sustainable and selective synthesis of glycerol carbonate (GC) from urea and glycerol under ambient pressure using carbon-fiber-supported metal oxide catalysts are reported. Carbon fibers (CF) were prepared via a catalytic chemical vapor deposition method (CCVD) using Ni as a catalyst and liquefied petroleum gas (LPG) as a cheap carbon source. Supported metal oxide catalysts were obtained by an incipient wetness impregnation technique using Zn, Ba, Cr, and Mg nitrates. Finally, the samples were pyrolyzed and oxidized in an air flow. The obtained catalysts (10%MexOy/CFox) were tested in the reaction of urea glycerolysis at 140 °C for 6 h under atmospheric pressure, using an equimolar ratio of reagents and an inert gas flow for NH3 removal. Under the applied conditions, all of the prepared catalysts increased the glycerol conversion and glycerol carbonate yield compared to the blank test, and the best catalytic performance was shown by the CFox-supported ZnO and MgO systems. Screening of the reaction conditions was carried out by applying ZnO/CFox as a catalyst and considering the effect of reaction temperature, molar ratio of reagents, and the mode of the inert gas flow through the reactor on the catalytic process. Finally, a maximum yield of GC of about 40%, together with a selectivity to glycerol carbonate of ~100%, was obtained within 6 h of reaction at 140 °C using a glycerol-to-urea molar ratio of 1:1 while flowing Ar through the reaction mixture. Furthermore, a positive heterogeneous catalytic effect of the CFox support on the process was noticed.

An Overview of the Latest Advances in the Catalytic Synthesis of Glycerol Carbonate

In recent years, the development of renewable energy alternatives to traditional fossil fuels has become one of the major challenges all over the world, due to the decline of fossil fuel reserves and their effect on global warming. Biodiesel has become a popular alternative energy source to reduce gas emissions compared to traditional fossil fuels. According to statistics, a nine-fold increase in global biofuel production between 2000 and 2020 was observed. However, its production generates a large amount of glycerol as a by-product, posing an environmental problem when disposed directly in landfills or by incineration. Therefore, low-value glycerol should be converted into high value-added derivatives. As glycerol carbonate is one of the most important derivatives of glycerol, this review aims to discuss the studies over the last ten years about glycerol carbonate synthetic methods, including the typical routes such as phosgene, esterification reaction, urea, oxidative and direct carbonylation as well as several rare synthetic procedures. At the same time, it summarizes the different catalytic reaction systems of each route comparing the advantages and disadvantages of various catalysts and evaluating their catalytic activity. Finally, the future development of glycerol carbonate synthesis is prospected from the point of view of development, technology research and industrialization.