Influence of magnetic field on dispersion and dissipation of electric field of low and medium frequencies in hybrid magnetorheological suspensions

The effect of salt water ageing on the mechanical and rheological properties of magnetorheological elastomer

This paper aims to investigate the mechanical and rheological properties of magnetorheological elastomer (MRE) in marine ecosystems. The prepared samples comprised silicone rubber (SR) and 70 wt% micron-sized carbonyl iron particles (CIPs), immersed in an artificial marine ecosystem using salt water (Natrium Chloride) for 30 days. The mechanical properties of MRE samples were evaluated using hardness and quasi-static tensile tests. While the rheometer was used to investigate the rheological properties of their storage modulus condition with magnetic field stimulation. Further analysis of the defects and damages caused by salt water ageing was done through morphological observation using scanning electron microscope (SEM) technology. The results showed that the hardness and tensile strength of MRE samples that were soaked in salt water were affected over time. Lower values of hardness and tensile strength were obtained after 30 days due to the presence of Na⁺ and Cl^-, which acted as an accelerator to the hydrolyzation process of the MRE. The process then, enhanced the water ingress capability into the matrix to cause the molecular changes. Interestingly, for rheological properties, 30 days of salt water ageing allowed the water molecules to move the MRE matrix molecular chains apart, a process known as plasticization and thus increasing the MR effect. Furthermore, morphological evidence was established to determine the MRE changes during salt water ageing. The research findings should greatly contribute to a better understanding of the effect of salt water on the performance of MRE.

Magneto-Dielectric Effects in Polyurethane Sponge Modified with Carbonyl Iron for Applications in Low-Cost Magnetic Sensors

In this study, magnetizable polyurethane sponges (MSs) were obtained from commercial absorbent polyurethane sponges (PSs) doped with carbonyl iron microparticles (CIPs). Based on MSs, we manufactured cylindrical capacitors (CCs). The CCs were subjected to both a magnetic field and an alternating electric field, with a frequency of f=1 kHz. Using an RLC bridge, we measured the series electric capacitance, Cs, and the tangent of the loss angle, Ds. From the functions Cs=Cs(δ)CCs and Ds=Ds(δ)CCs, we extracted the components of the complex dielectric permittivity. It was found that the CIPs embedded in the MS matrix aggregated, leading to magneto-dielectric effects such as the enhancement of the complex dielectric permittivity components when applying the magnetic field as a principal effect and the enhancement of the electric capacitance and time constant of the capacitors as a secondary effect. The obtained results represent landmarks in the realization of low-cost magnetic field sensors, deformation and mechanical stress transducers in the robotics industry, etc.

Rubber elastomeric nanocomposites with antimicrobial properties

In this paper we show an elastomeric nanocomposite that exhibits antibacterial and antifungal activity. It comprises a rubber blend matrix and a nanofiller, which is a modified bentonite clay (Nanobent® ZR2). We have developed innovative technology for the nanofiller incorporation into the rubber matrix. This new approach was successfully implemented in pilot production at the Polish chemical manufacturer Spoiwo (Spoldzielnia Pracy Chemiczno-Wytworczej 'Spoiwo', Radom, Poland). Here we reveal that addition of the functionalised bentonite affects the mechanical and thermal behaviour of elastomers. For example, by adding 1-3% of bentonite nanoparticles we strongly enhanced elongation and tensile stress at break, whereas stiffness remained unchanged. We observed improvement of the thermal properties of the nanocomposites yielded and extension of the temperature usage range (from -29 to 311°C). As a proof of concept we present the antimicrobial effect of elastomeric nanocomposites verified on a wide range of both pathogenic and opportunistic reference bacteria strains, as well as reference strains of yeasts. The proposed method of hydrophilic nanofiller introduction into the rubber elastomer is economically viable and enables fabrication of elastomeric elements with high added value. Their significant antibacterial and antifungal activity makes them desirable in medicine, biomedical engineering, and the food industry.