A highly selective, sensitive and stable fluorescent chemosensor based on Schiff base and poly(azomethine-urethane) for Fe3+ ions

A smartphone-enabled colorimetric sensor based on VS2 quantum dots for Rapid and on-site detection of ferric ions

This research delves into the holistic hydrothermal synthesis of VS2 QDs and their subsequent utilization as a fluorescent probe for the subtle detection of ferric ions (Fe3+) in practical sample matrices. The detection paradigms harness a colorimetric sensing mechanism, amplified by smartphone-enabled analytical integration for improved precision and real-time monitoring. A comprehensive suite of analytical characterization techniques has been employed, revealing that the as-synthesized VS2 QDs feature a surface densely populated with functional groups. While the VS2 QDs showcase interactions with multifarious metal ions in aqueous media, they set forth a pronounced and selective fluorescent quenching response toward Fe3+ ions, markedly surpassing their interactions with other metal ions. The developed sensing probe exhibits a linear detection range spanning from 0 - 90 μM, with a LOD as low as 2.25 μM, also exhibits exceptional sensitivity (KD ∼ 0.8 × 104 M-1) and remarkable selectivity for Fe3+ ions, harnessing the intrinsic photoluminescent characteristics of VS2 QDs. In addition, a sophisticated portable smartphone platform, integrated with a radiometric fluorescence probe specifically tailored for in-situ detection of Fe3+ at the point of care, exhibits a LOD of approximately 5.05 μM, a value that resides below the prescribed safety threshold. Thus, the proposed probe stands to function as an exceptionally potent sensing apparatus for the precise quantification of Fe3+ in complex real-world samples.

A colorimetric sensor based on 2,3-bis(6-chloropyridin-2-yl)-6-fluoroquinoxaline for naked-eye detection of Iron (III) and its application in real sample analysis

Iron ions are crucial for numerous biological processes, and the levels of these ions have a significant impact on human well-being. Hence, it is essential to identify the level of Iron ions using a suitable technique. A new colorimetric sensor, namely "2,3-bis(6-chloropyridin-2-yl)-6-fluoroquinoxaline" (CF), has been introduced to detect Fe3+ through naked-eye observation. The sensor exhibits remarkable specificity towards Fe3+ compared to other metal ions in aqueous environments. Furthermore, it undergoes a substantial color change from colorless to yellow, which is visible without needing additional equipment. The complex formation was proposed to be in 1:1 ratio based on the Job's plot and molar ratio plot. The maximum sensitivity of CF towards Fe3+ was found at pH 6 to 8. Minimal or negligible interference was noticed from different metal ions in the detection of Fe3+. The binding constant using Benesi-Hildebrand was estimated at 1.434 × 104 M-1. Gibbs free energy was determined -23.728 kJ/Mol. The LOD and LOQ were calculated at 0.378 and 1.26 µM, respectively. The probe CF was utilized to recover Fe3+ in tap water, resulting in recovery percentages ranging from 99.44 to 103.61. This indicates that the CF has the ability to identify Fe3+ in environmental samples.

Rapid Fluorescent Probe Detection of Magnesium Impurities in High-Purity Lithium Carbonate Brine Systems

The magnesium impurities in lithium carbonate cannot be detected quickly in an aqueous environment. To solve this bottleneck problem, this study proposes a new method for the rapid detection of trace Mg2+ in lithium carbonate using a water-soluble fluorescent probe. A water-soluble fluorescent probe A was obtained by introducing hydroxyl groups on a fluorescent oxazole ring. After modification, the hydrogen bonding between the probe and water molecules increased by more than 62 times. Consequently, the energy loss of outward transfer of the fluorescent probe increased, resulting in weak fluorescence in saline systems. Mg2+ was captured by N on the oxazole ring and O on the phenolic hydroxyl group through a 1:1 coordination ratio within the probe structure. The hydrogen bonding attraction between the complex and water molecules increased 16 times. Additionally, the orbital energy gap was reduced from 2.817 to 0.383 eV. Meanwhile, the Mg2+ impeded the phototropic electron transfer effect process, resulting in enhanced fluorescence and completing this process within 3 to 10 s, with a detection limit of 6.06 μmol/L. This method can promote the real-time and rapid quality control of Mg2+ impurities in the refining and purification of lithium carbonate, as well as effectively reduce production costs.

Effect of structure on sensing performance of nitro explosives with high sensitivity and mechanism of two Tb(III) coordination polymers

The use of a conjugate N-containing ligand resulted in the decreasing of structural dimensions from 2D network of [Tb(2-pyia)(Ac)(H2O)] (CP1) to 1D chain [Tb(2-pyia)(Ac)(IDP)] (CP2) (2-H2pyia = 5-(pyridin-2-ylmethoxy) isophthalic acid and IDP=imidazo[4,5-f]-[1,10] phenanthroline). Both of them exhibit the characteristic luminescence of Tb ions and could have high fluorescence sensing properties for cefixime and fluridine. The different sensing properties for nitro explosives are manifested as CP1 for nitrobenzene and CP2 for 4-nitrophenol due to the difference in structure. Furthermore, CP2 exhibits the ratiometric fluorescence sensing for Fe3+ ion with a low detection limit of 0.405 μM. The fluorescence sensing mechanism of the two Tb complexes for different analytes was investigated using experimental methods and theoretical calculations. CP1 was used for the detection of Flu residues in the actual system and better results were obtained. The work shows the introduction of the chelated ligand might affect the structural and sensing performance changes of coordination polymers.

Conjugated Polymer-Based Hydrogel Film for a Fast and Sensitive Detection of Fe(Ⅲ) in Vegetables

Fluorescent film sensors are ideal for the real-time outdoor detection of heavy metal ions of Fe3+, but they are limited because of their low sensitivity and long response time due to their special structure. In this work, we constructed a fluorescent hydrogel for the specific detection of Fe3+, utilizing poly(9-fluorenecarboxylic acid) (PFCA) as the sensing moiety and sodium alginate (SA) as the cross-linking substrate, which exhibited a rapid and selective recognition of Fe3+ among a panel of 16 anions and 21 cations. It can sense Fe3+ at 0.1 nM immediately owing to the porous network structure of the PFCA-SA film that provided enhanced ion transport channels and active sites, and the "molecular line effect" of polymer PFCA. Moreover, we successfully applied this platform to detect Fe3+ in four different vegetable samples. This work provides an innovative and effective strategy for fabricating green and sustainable fluorescent sensors.

Designing of efficient two-armed colorimetric and fluorescent indole appended organosilicon sensors for the detection of Al(III) ions: Implication as paper-based sensor

Metal ions have significant roles in diagnosis, industry, human health, and the environment. To design and develop new lucid molecular receptors for the selective detection of metal ions is important for environmental and medical applications. In the present work, two-armed indole appended Schiff bases conjoined with 1,2,3-Triazole bis-organosilane and bis-organosilatrane skelton sensors for naked eye colorimetric and fluorescent detection sensors for Al(III) are developed. The introduction of Al(III) in sensor 4 and 5 show red shift in UV-visible spectra, changes in fluorescence spectra and immediate color change from colorless to dark yellow. Furthermore, the pH and time response studies were explored for both sensors 4 & 5. The sensors 4 and 5 exhibited significantly low detection limit (LOD) in nano-molar range 1.41 × 10-9 M and 0.17 × 10-9 M respectively from emission titration. The LOD form absorption titration was found to be 0.6 × 10-7 M for sensor 4 and 0.22 × 10-7 M for sensor 5. In addition, the sensing model is developed as paper based sensor for its practical applicability. The theoretical calculations were performed on Gaussian 03 program by relaxing the structures using Density functional theory.

Highly selective and sensitive detection of glutathione over cysteine and homocysteine with a turn-on fluorescent biosensor based on cysteamine-stabilized CdTe quantum dots

In this work, cysteamine (CA) stabilized CdTe quantum dots (QDs) (CA-CdTe QDs) and sodium citrate stabilized gold nanoparticles (AuNPs) were prepared. Because of the strong electrostatic interaction and spectral overlap of emission spectrum of CA-CdTe QDs and absorption spectrum of AuNPs, a highly effective fluorescence resonance energy transfer (FRET) system was formed and the fluorescence of CA-CdTe QDs was strongly quenched. The synthesized CA-CdTe and AuNPs were self-assembled to large clusters due to the electrostatic attraction and the fluorescence of CA-CdTe was sharply quenched as a result of FRET. Under the optimum pH of 5.5, the positive GSH could assemble with negative AuNPs through electrostatic interaction and destroy the FRET system of CA-CdTe and AuNPs, due to the red shift of absorption wavelength of AuNPs caused by aggregation. The fluorescence of CA-CdTe recovered, and the recovered fluorescence efficiency shows a linear function against the GSH concentrations from 6.7 nM to 0.40 μM, with a detecting limit of 3.3 nM. The quenched emission of CA-CdTe could be recovered attributed to the aggregation of AuNPs by GSH. Under optimal conditions, the sensing system was successfully applied in the detection of GSH in real human blood plasma samples with a recovery of 99.5-102.3%, showing a promising future for the highly sensitive and selective GSH detection in the human blood plasma samples.

Novel multi-stimuli-responsive supramolecular gel based on quinoline for the fluorescence ultrasensitive detection of Fe3+and Cu2

A novel gelator molecular based on quinolone (MN) has been successfully designed and synthesized. The gelator MN could self-assemble to form a supramolecular gel (OMN), which showed obvious aggregation-induced emission (AIE) in iso-Propyl alcohol (i-PrOH). Furthermore, the supramolecular organogel OMN realized ultrasensitive detection of Fe³⁺ and Cu²⁺ in aqueous medium and fluorescent quenching at 427 nm. The sensing mechanism between supramolecular gel and metal ions was fully investigated via FE-SEM, FT-IR, XRD and XPS. Meanwhile, a thin film based on responsive supramolecular gel OMN was prepared, which could be used as multi-stimuli-responsive fluorescent display materials for the detection of Fe³⁺ and Cu²⁺.

Ratiometric fluorescence sensor based on europium-grafted ZnO quantum dots for visual and colorimetric detection of tetracycline

An europium functionalized ZnO quantum dots (QDs) ratiometric fluorescent nanoprobe is designed to establish a real time, on-site visual, and highly sensitive probe method for tetracycline (TC). The yellow-emitting ZnO QDs serves as the internal reference, while the Eu³⁺ chelated on the surface of ZnO QDs is used as the signal reporting unit. This nanoprobe exhibits rapid response, excellent selectivity, and high sensitivity with a detection limit of 4 nM in detecting the levels of TC. In addition, fluorescence of the nanoprobe can change from yellow to red as the concentration of TC increases. Thus, naked eye detection of TC was realized using the test paper processed by nanoprobe, followed by RGB value analysis function on the mobile phone APP.

A dual-channel colorimetric and ratiometric fluorescence chemosensor for detection of Hg2+ ion and its bioimaging applications

A new colorimetric and ratiometric fluorescence chemosensor 4-((3-(octadecylthio)-1,4-dioxo-1,4-dihydronaphthalen-2-yl)amino)benzenesulfonamide (4DBS) was synthesized and investigated for the selective detection of Hg²⁺ in DMSO-H₂O (9:1, v/v) solution. The chemosensor was efficiently synthesized in two steps via Michael-like addition and nucleophilic substitution reactions. The ratiometric fluorescence turn-on response was obtained towards Hg²⁺, and its fluorescence emission peak was red-shifted by 140 nm with an associated color change from light maroon to pale yellow due to the intramolecular charge transfer effect. The formed coordination metal complex was further evaluated by FT-IR, ¹H NMR, and quantum chemical analyses to confirm the binding mechanism. The detection process was sensitive/reversible, and the calculated limit of detection for Hg²⁺ was 0.451 µM. Furthermore, 4DBS was effectively utilized as a bioimaging agent for detection of Hg²⁺ in live cells and zebrafish larvae. Additionally, 4DBS showed distinguishing detection of Hg²⁺ in cancer cells in comparison with normal cells. Thus, 4DBS could be employed as an efficient bioimaging probe for discriminative identification of human cancer cells.

A dual responsive colorimetric sensor based on polyazomethine and ascorbic acid for the detection of Al (III) and Fe (II) ions

In the present paper, a novel double cation target colorimetric sensor was developed for the detection of Al (III), and Fe (II) ions. It was composed of ascorbic acid in a polyazomethine matrix, and polyazomethine was used to form a homogenous matrix for mixing ascorbic acid. The photophysical properties of the colorimetric sensor were clarified by using UV-Vis and fluorescence spectrophotometers. It was found that the developed sensor was exhibited good naked eye selectivity, and sensitivity toward Al (III), and Fe (II) ions with excellent photostability. Furthermore, the detection limit of the sensor was calculated as 0.398 µM (0.096 ppm) and 0.185 µM (0.051 ppm) for Al (III), and Fe (II), respectively. The applicability of the colorimetric sensor in environmental (tap and sea waters) and biological (Bovine serum albumin) solutions was also studied, and the results exhibited that the developed sensor could be successfully applied to monitoring environmental and biological samples.

Selective and Sensitive ZnO Quantum Dots Based Fluorescent Biosensor for Detection of Cysteine

In the present article, a novel and effective ZnO quantum dots-based fluorescent probe has been developed for the detection of cysteine in different solutions. Firstly, melamine-based fluorescent pre-probe was successfully synthesized via condensation reaction and, then ZnO quantum dots (QDs) were homogenously dispersed into this solution. This fluorescent probe was used for the detection of cysteine in different solutions such as bovine serum albumin and tap water. ZnO QDs were characterized using XRD, nano-particle size analyzer, and FE-SEM techniques. The size of the ZnO QDs was calculated as 28.03±9.86 nm, and 31.95±10.02 nm from Scherrer's equation and nano-particle size analyzer, respectively. The developed fluorescent probe was exhibited a highly selective and sensitive response to the detection of cysteine. Also, the proposed fluorescent probe has a larger Stokes shift value (236 nm). The limit of detection and linear range of ZnO QDs-based fluorescent biosensor were found as 0.642 μM and 0.1-600 μM, respectively. ZnO quantum dot-based fluorescent sensor for L-cysteine.

Poly(azomethine-urethane) and zeolite-based composite: Fluorescent biosensor for DNA detection

In the present paper, a highly selective and sensitive fluorescent biosensor based on poly(azomethine-urethane) and zeolite for the determination of DNA molecules was developed. Zeolite was chosen to enhance with anionic or cationic functional groups in polymer matrix and interaction between polymer and DNA. Several parameters such as polymer concentration, pH and incubation time effect on the sensitivity of the fluorescent biosensor were optimized. Linear range was determined between 2.50 and 25.00 nmol/L DNA concentration and limit of detection (LOD) of the biosensor was calculated as 0.095 nmol/L under the optimal conditions. Interference study was also performed in the presence of different amino acids, cations and organic compounds. The results clearly indicated that the tested cations and compounds were not induced a significant fluorescence change and the proposed zeolite-based biosensor was shown a good selectivity for DNA.

New approach for the quantification of metallic species in healthcare products based on optical switching of a Schiff base possessing ONO donor set

A new method is reported for the quantification of some metallic components of healthcare products utilizing a Schiff base chelator derived from 2-hydroxyacetophenone and ethanolamine. The Schiff base chelator recognizes some metallic species such as iron, copper and zinc (important components of some healthcare products), and cadmium (common contaminant in healthcare products) giving colorimetric/fluorimetric response. It coordinates with Fe²⁺/Fe³⁺ and Cu²⁺ ions via ONO donor set and switches the colour to bright red, green and orange, respectively. Similarly, it switches 'ON' a fluorometric response when coordinates with Zn²⁺ and Cd²⁺ ions. In the present approach, detailed studies on the colorimetric and fluorimetric response of ONO Schiff base is investigated in detail. The Job plot for the complexation of ONO switch with various metal ions suggested formation of 1:1 (metal-chelator) complex with Fe²⁺, Fe³⁺, and Cu²⁺ while 1:2 (metal-chelator) for Zn²⁺ and Cd²⁺ ions. The limit of detection, limit of quantification are 6.73, 18.0, 25.0, 0.65, 1.10μM and 27.0, 72.0, 100.0, 2.60 and 4.40μM for Fe²⁺, Fe³⁺, Cu²⁺, Zn²⁺ and Cd²⁺ ions, respectively. Under the optimized conditions, chelator was used for the quantification of important metals present in healthcare products via direct dissolution and furnace treatment during sample preparation. The results were found precise and accurate for both sample preparation techniques using the developed method.