Influence of crosslinking in phosphoric acid-doped poly(phenylene oxide) membranes on their proton exchange membrane properties

Confining Phosphoric Acid in Quaternized COF Channels for Ultra-Stable and Fast Anhydrous Proton Transport

Phosphoric acid (H3PO4) doping is a widely employed strategy to facilitate anhydrous proton transport in high-temperature proton exchange membrane fuel cells (HT-PEMFCs). However, significant H3PO4 leaching during long-term operation poses critical challenges to maintaining membrane stability and proton conductivity. Herein, H3PO4 is incorporated into positively charged nanochannels of quaternized covalent organic framework membranes (QACOFMs), leveraging strong electrostatic interactions and confinement effects to achieve exceptional H3PO4 retention under hydration conditions. Moreover, the shortened hydrogen bond length between H3PO4 (O-H…O <2.7 Å) and the highly interconnected hydrogen bond network in the H3PO4@QACOFMs facilitate ultra-fast anhydrous proton transport. As a result, the H3PO4@QACOFMs exhibit superior anhydrous proton transport in a broader temperature range (60 °C-200 °C) and the highest proton conductivity reaches about 379.7 mS cm-1 at 200 °C.

Designing High Content Carbonylated β-Cyclodextrin/PBI Mixed Matrix Membrane as HT-PEM to Reduce H3PO4 Loss

The high-temperature proton exchange membranes suffer from weak binding strength for phosphoric acid molecules, which seriously reduce the fuel cell efficiency, especially operation stability. Introduction of microporous material in the membrane can effectively reduce the leaching of phosphoric acid. However, due to the poor compatibility between the polymer and fillers, the membrane's performance significantly reduced at high fillers content. Therefore, in this work, the strategy of micropore confinement was developed; the β-cyclodextrin was carbonylated and introduced into PBI casting solution as solution state rather than dry powder for reducing the interface energy between two phases, thus further reducing interface defects and increasing the content of effective confined micropores within the membrane. By this way, carbonylated β-cyclodextrin/PBI (50 wt %) mixed matrix membranes were obtained, the proton conductivity reached 142 ± 4 mS cm-1, while the conductivity attenuation was only 16.6%.

Introduction of polymeric ionic liquids containing quaternary ammonium groups to construct high-temperature proton exchange membranes with high proton conductivity and stability

A series of membrane materials suitable for high-temperature proton exchange membranes (HT-PEM) were successfully prepared by introducing polymeric ionic liquids (PILs) containing quaternary ammonium groups into ether-bonded polybenzimidazole (OPBI). The structure of the cross-linked membrane has a strong interaction with phosphoric acid (PA), which enhances proton transport and PA retention. To ensure better overall performance of the cross-linked membrane, the optimal PIL content is 30 wt% (OPBI-PIL-30 %). The PA uptake of OPBI-PIL-30 % membrane was 323.24 %, and the proton conductivity at 180 ℃ was 113.94 mS cm-1, which was much higher than that of OPBI membrane. It is noteworthy that the PA retention of OPBI-PIL-30 % membrane could reach 71.38 % after 240 h of testing under the harsh environment of 80 ℃/40 % RH. The membrane showed better acid retention capacity of 86.89 % at 160 ℃ under anhydrous environment. The OPBI-PIL-20 % membrane achieved the maximum power density of 436.19 mW cm-2, attributed to its favorable mechanical characteristics and proton conductivity. By these excellent properties, it is shown that OPBI-PIL-X membranes containing quaternary ammonium groups have the potential to be applied in high temperature proton exchange membrane fuel cells (HT-PEMFCs).

Confined Nano-Channels Incorporated with Multi-Quaternized Cations for Highly Phosphoric Acid Retention HT-PEMs

Developing a new strategy to retain phosphoric acid (PA) to improve the performance and durability of high-temperature proton exchange membrane fuel cell (HT-PEMFC) remains a challenge. Here, a strategy for ion-restricted catcher microstructure that incorporates PA-doped multi-quaternized poly(fluorene alkylene-co-biphenyl alkylene) (PFBA) bearing confined nanochannels is reported. Dynamic analysis reveals strong interaction between side chains and PA molecules, confirming that the microstructure can improve PA retention. The PFBA linked with triquaternary ammonium side chain (PFBA-tQA) shows the highest PA retention rate of 95%. Its H2/O2 fuel cell operates within 0.6% voltage decay at 160 °C/0% RH, and it also runs over 100 h at 100 °C/49% RH under external humidification. This combination of high PA retention, and chemical and dimensional stability fills a gap in the HT-PEMFC field, which requires strict moisture control at 90-120 °C to prevent acid leaching, simplifying the start-up procedure of HT-PEMFC without preheating.