Effects of hydrothermal parameters on the physicochemical property and photocatalytic degradation of bisphenol A of Ti-based TiO2 nanomaterials

Recent Advances in Antibacterial Strategies Based on TiO2 Biomimetic Micro/Nano-Structured Surfaces Fabricated Using the Hydrothermal Method

Ti and its alloys, widely utilized in orthopedic and dental implants, inherently lack antibacterial properties, posing significant infection risks, especially in the context of growing antibiotic resistance. This review critically evaluates non-antibiotic antibacterial strategies, with a particular focus on surface modifications and micro/nano-structured surfaces. Micro/nano-structured surfaces, inspired by natural topographies, utilize physical mechanisms to eradicate bacteria. Despite their potential, the antibacterial efficacy of these surfaces remains insufficient for clinical application. Titanium dioxide (TiO2), known for its excellent photocatalytic antibacterial activity and biocompatibility, is emerging as an ideal candidate for enhancing micro/nano-structured surfaces. By combining the photocatalytic antibacterial effects of TiO2 with the mechanical bactericidal properties of micro/nano-structured surfaces, superior antibacterial performance can be achieved. The hydrothermal method is frequently employed to fabricate TiO2 micro/nano-structured surfaces, and this area of research continues to thrive, particularly in the development of antibacterial strategies. With demonstrated efficacy, combined antibacterial strategies based on TiO2 micro/nano-structured surfaces have become a prominent focus in current research. Consequently, the integration of physical stimulation and chemical release mechanisms may represent the future direction for TiO2 micro/nano-structured surfaces. This review aims to advance the study of TiO2 micro/nano-structured surfaces in antibacterial applications and to inspire more effective non-antibiotic antibacterial solutions.

Fabrication of an in situ-grown TiO2 nanowire thin film and its enhanced photocatalytic activity

TiO2 is a promising photocatalyst used in practical environmental remediation. TiO2 photocatalysts are usually implemented in two forms: suspended powder and immobilized thin films. A simple technique for fabricating TiO2 thin film photocatalyst was developed in this work. The fabricated TiO2 thin film photocatalyst featured a homogeneous nanowire layer grown in situ on the parent Ti plate. The optimized fabrication protocol was to soak the ultrasonically cleaned and acid-washed Ti plate in 30% H2O2 solution containing 3.2 mM melamine and 0.29 M HNO3 at 80 °C for 72 h and then anneal at 450 °C for 1 h. TiO2 nanowires with uniform diameters were homogeneously arrayed on the Ti plate surface. The thickness of the TiO2 nanowire array layer was 1.5 μm. The pore properties of the TiO2 thin film were close to those of P25. The band gap of the fabricated photocatalyst was 3.14 eV. The photocatalytic activity of the fabricated photocatalyst toward 10 mg/L RhB and 1 mg/L CBZ demonstrated greater than 60% degradation under 2 h UVC irradiation. The RhB and CBZ degradation efficiencies remained at a good level after 5 consecutive cycles. Mechanical wearing, such as 2 min sonication, will not lead to significant suppression of the photocatalytic activity. Photocatalytic RhB and CBZ degradation using the fabricated photocatalyst favored an acidic > alkaline > neutral environment. The presence of Cl- slightly suppressed the photocatalytic degradation kinetics. However, RhB and CBZ photocatalytic degradation kinetics were promoted in the copresence of SO42- or NO3-.