Conformational dynamics of Thermus aquaticus DNA polymerase I during catalysis

Design and interpretation of experiments to establish enzyme pathway and define the role of conformational changes in enzyme specificity

We describe the experimental methods and analysis to define the role of enzyme conformational changes in specificity based on published studies using DNA polymerases as an ideal model system. Rather than give details of how to perform transient-state and single-turnover kinetic experiments, we focus on the rationale of the experimental design and interpretation. We show how initial experiments to measure k_cat and k_cat/K_m can accurately quantify specificity but do not define its underlying mechanistic basis. We describe methods to fluorescently label enzymes to monitor conformational changes and to correlate fluorescence signals with rapid-chemical-quench flow assays to define the steps in the pathway. Measurements of the rate of product release and of the kinetics of the reverse reaction complete the kinetic and thermodynamic description of the full reaction pathway. This analysis showed that the substrate-induced change in enzyme structure from an open to a closed state was much faster than rate-limiting chemical bond formation. However, because the reverse of the conformational change was much slower than chemistry, specificity is governed solely by the product of the binding constant for the initial weak substrate binding and the rate constant for the conformational change (k_cat/K_m=K₁k₂) so that the specificity constant does not include k_cat. The enzyme conformational change leads to a closed complex in which the substrate is bound tightly and is committed to the forward reaction. In contrast, an incorrect substrate is bound weakly, and the rate of chemistry is slow, so the mismatch is released from the enzyme rapidly. Thus, the substrate-induced-fit is the major determinant of specificity. The methods outlined here should be applicable to other enzyme systems.

Single-molecule Taq DNA polymerase dynamics

Taq DNA polymerase functions at elevated temperatures with fast conformational dynamics-regimes previously inaccessible to mechanistic, single-molecule studies. Here, single-walled carbon nanotube transistors recorded the motions of Taq molecules processing matched or mismatched template-deoxynucleotide triphosphate pairs from 22° to 85°C. By using four enzyme orientations, the whole-enzyme closures of nucleotide incorporations were distinguished from more rapid, 20-μs closures of Taq's fingers domain testing complementarity and orientation. On average, one transient closure was observed for every nucleotide binding event; even complementary substrate pairs averaged five transient closures between each catalytic incorporation at 72°C. The rate and duration of the transient closures and the catalytic events had almost no temperature dependence, leaving all of Taq's temperature sensitivity to its rate-determining open state.

Conformational dynamics during high-fidelity DNA replication and translocation defined using a DNA polymerase with a fluorescent artificial amino acid

We address the role of enzyme conformational dynamics in specificity for a high-fidelity DNA polymerase responsible for genome replication. We present the complete characterization of the conformational dynamics during the correct nucleotide incorporation forward and reverse reactions using stopped-flow and rapid-quench methods with a T7 DNA polymerase variant containing a fluorescent unnatural amino acid, (7-hydroxy-4-coumarin-yl) ethylglycine, which provides a signal for enzyme conformational changes. We show that the forward conformational change (>6000 s⁻¹) is much faster than chemistry (300 s⁻¹) while the enzyme opening to allow release of bound nucleotide (1.7 s⁻¹) is much slower than chemistry. These parameters show that the conformational change selects a correct nucleotide for incorporation through an induced-fit mechanism. We also measured conformational changes occurring after chemistry and during pyrophosphorolysis, providing new insights into processive polymerization. Pyrophosphorolysis occurs via a conformational selection mechanism as the pyrophosphate binds to a rare pretranslocation state of the enzyme–DNA complex. Global data fitting was achieved by including experiments in the forward and reverse directions to correlate conformational changes with chemical reaction steps. This analysis provided well-constrained values for nine rate constants to establish a complete free-energy profile including the rates of DNA translocation during processive synthesis. Translocation does not follow Brownian ratchet or power stroke models invoking nucleotide binding as the driving force. Rather, translocation is rapid and thermodynamically favorable after enzyme opening and pyrophosphate release, and it appears to limit the rate of processive synthesis at 4 °C.

A user-friendly, high-throughput tool for the precise fluorescent quantification of deoxyribonucleoside triphosphates from biological samples

Cells maintain a fine-tuned, dynamic concentration balance in the pool of deoxyribonucleoside 5′-triphosphates (dNTPs). This balance is essential for physiological processes including cell cycle control or antiviral defense. Its perturbation results in increased mutation frequencies, replication arrest and may promote cancer development. An easily accessible and relatively high-throughput method would greatly accelerate the exploration of the diversified consequences of dNTP imbalances. The dNTP incorporation based, fluorescent TaqMan-like assay published by Wilson et al. has the aforementioned advantages over mass spectrometry, radioactive or chromatography based dNTP quantification methods. Nevertheless, the assay failed to produce reliable data in several biological samples. Therefore, we applied enzyme kinetics analysis on the fluorescent dNTP incorporation curves and found that the Taq polymerase exhibits a dNTP independent exonuclease activity that decouples signal generation from dNTP incorporation. Furthermore, we found that both polymerization and exonuclease activities are unpredictably inhibited by the sample matrix. To resolve these issues, we established a kinetics based data analysis method which identifies the signal generated by dNTP incorporation. We automated the analysis process in the nucleoTIDY software which enables even the inexperienced user to calculate the final and accurate dNTP amounts in a 96-well-plate setup within minutes.

Structural basis for the D-stereoselectivity of human DNA polymerase β

Nucleoside reverse transcriptase inhibitors (NRTIs) with L-stereochemistry have long been an effective treatment for viral infections because of the strong D-stereoselectivity exhibited by human DNA polymerases relative to viral reverse transcriptases. The D-stereoselectivity of DNA polymerases has only recently been explored structurally and all three DNA polymerases studied to date have demonstrated unique stereochemical selection mechanisms. Here, we have solved structures of human DNA polymerase β (hPolβ), in complex with single-nucleotide gapped DNA and L-nucleotides and performed pre-steady-state kinetic analysis to determine the D-stereoselectivity mechanism of hPolβ. Beyond a similar 180° rotation of the L-nucleotide ribose ring seen in other studies, the pre-catalytic ternary crystal structures of hPolβ, DNA and L-dCTP or the triphosphate forms of antiviral drugs lamivudine ((-)3TC-TP) and emtricitabine ((-)FTC-TP) provide little structural evidence to suggest that hPolβ follows the previously characterized mechanisms of D-stereoselectivity. Instead, hPolβ discriminates against L-stereochemistry through accumulation of several active site rearrangements that lead to a decreased nucleotide binding affinity and incorporation rate. The two NRTIs escape some of the active site selection through the base and sugar modifications but are selected against through the inability of hPolβ to complete thumb domain closure.

Investigation of Intradomain Motions of a Y-Family DNA Polymerase during Substrate Binding and Catalysis

DNA polymerases catalyze DNA synthesis through a stepwise kinetic mechanism that begins with binding to DNA, followed by selection, binding, and incorporation of a nucleotide into an elongating primer. It is hypothesized that subtle active site adjustments in a polymerase to align reactive moieties limit the rate of correct nucleotide incorporation. DNA damage can impede this process for many DNA polymerases, causing replication fork stalling, genetic mutations, and potentially cell death. However, specialized Y-family DNA polymerases are structurally evolved to efficiently bypass DNA damage in vivo, albeit at the expense of replication fidelity. Dpo4, a model Y-family polymerase from Sulfolobus solfataricus, has been well-studied kinetically, structurally, and computationally, which yielded a mechanistic understanding of how the Y-family DNA polymerases achieve their unique catalytic properties. We previously employed a real-time Förster resonance energy transfer (FRET) technique to characterize the global conformational motions of Dpo4 during DNA binding as well as nucleotide binding and incorporation by monitoring changes in distance between sites on the polymerase and DNA, and even between domains of Dpo4. Here, we extend the utility of our FRET methodology to observe conformational transitions within individual domains of Dpo4 during DNA binding and nucleotide incorporation. The results of this novel, intradomain FRET approach unify findings from many studies to fully clarify the complex DNA binding mechanism of Dpo4. Furthermore, intradomain motions in the Finger domain during nucleotide binding and incorporation, for the first time, report on the rate-limiting step of a single-nucleotide addition catalyzed by Dpo4.

Kinetic analysis of bypass of O(6)- methylguanine by the catalytic core of yeast DNA polymerase eta

Alkylating agents can form O(6)-methylguansine (O(6)-MeG). To study the intrinsic kinetic behaviors of bypassing O(6)-MeG, we used the catalytic core of yeast DNA polymerase η (Pol ηcore, residues 1-513), instead of the full-length Pol η, to study their elementary steps, eliminating the effects of the C-terminal C2H2 motif on dNTP incorporation. The misincorporation frequencies were 10(-4) for G and 0.055-0.446 for O(6)-MeG. O(6)-MeG does not affect the extension efficiency. Pol ηcore showed no fast burst phase for any incorporation opposite G or O(6)-MeG. Primer extension was greatly blocked by O(6)-MeG and about 67% dTTP, 31% dCTP and 2% dATP were incorporated opposite O(6)-MeG. This study provides further understanding of the mutation mechanism of alkylated lesion for yeast DNA polymerase η.

Kinetic analysis of bypass of 7,8-dihydro-8-oxo-2'-deoxyguanosine by the catalytic core of yeast DNA polymerase η

Reactive oxygen species damage DNA bases to produce 7,8-dihydro-8-oxo-2'-deoxyguanosine (8-oxoG), which results in G:C to T:A transversions. To better understand mechanisms of dNTP incorporation opposite 8-oxoG, we performed pre-steady-state kinetic analysis of nucleotide incorporation using the catalytic core of yeast DNA polymerase η (Pol ηcore, residues 1-513) instead of full-length Pol η, eliminating potential effects of the C-terminal C2H2 sequence motif on dNTP incorporation. Kinetic analysis showed that Pol ηcore preferred to incorporate dCTP opposite 8-oxoG. A lack of a pre-steady-state kinetic burst for Pol ηcore suggested that dCTP incorporation is slower than the dissociation of the polymerase from DNA. The extension products beyond the 8-oxoG were determined by LC-MS/MS and showed that 57% of the products corresponded to the correct incorporation (C) and 43% corresponded to dATP misincorporation. More dATP was incorporated opposite 8-oxoG with a mixture of dNTPs than predicted using only a single dNTP. The kinetic analysis of 8-oxoG bypass by yeast DNA Pol ηcore provides further understanding of the mechanism of mutation at this oxidation lesion with yeast DNA polymerase η.