Packing of muscles in the rabbit shank influences three-dimensional architecture of M. soleus

Influence of muscle length on the three-dimensional architecture and aponeurosis dimensions of rabbit calf muscles

The function of a muscle is highly dependent on its architecture, which is characterized by the length, pennation, and curvature of the fascicles, and the geometry of the aponeuroses. During in vivo function, muscles regularly undergo changes in length, thereby altering their architecture. During passive muscle lengthening, fascicle length (FL) generally increases and the angle of fascicle pennation (FP) and the fascicle curvature (FC) decrease, while the aponeuroses increase in length but decrease in width. Muscles are differently structured, making their change during muscle lengthening complex and multifaceted. To obtain comprehensive data on architectural changes in muscles during passive length, the present study determined the three-dimensional fascicle geometry of rabbit M. gastrocnemius medialis (GM), M. gastrocnemius lateralis (GL), and M. plantaris (PLA). For this purpose, the left and right legs of three rabbits were histologically fixed at targeted ankle joint angles of 95° (short muscle length [SML]) and 60° (long muscle length [LML]), respectively, and the fascicles were tracked by manual three-dimensional digitization. In a second set of experiments, the GM aponeurosis dimensions of ten legs from five rabbits were determined at varying muscle lengths via optical marker tracking. The GM consisted of a uni-pennated compartment, whereas the GL and PLA contained multiple compartments of differently pennated fascicles. In the LML compared to the SML, the GM, GL, and PLA had on average a 41%, 29%, and 41% increased fascicle length, and a 30%, 25%, and 33% decrease in fascicle pennation and a 32%, 11%, and 35% decrease in fascicle curvature, respectively. Architectural properties were also differentiated among the different compartments of the PLA and GL, allowing for a more detailed description of their fascicle structure and changes. It was shown that the compartments change differently with muscle length. It was also shown that for each degree of ankle joint angle reduction, the proximal GM aponeurosis length increased by 0.11%, the aponeurosis width decreased by 0.22%, and the area was decreased by 0.20%. The data provided improve our understanding of muscles and can be used to develop and validate muscle models.

Histomorphological and functional contralateral symmetry in the gastrocnemius muscles of the laboratory rat

It is usual in anatomical and physiological research to assess the effects of some intervention on extremities (e.g., training programmes or injury recovery protocols) using one muscle for the intervention and its contralateral as control. However, the existence of laterality (left‐handedness or right‐handedness) in athletes of different specialities is widely recognized. In rats, gastrocnemius is one of the muscles most widely used because of its importance in locomotion and high relative limb mass. Since we have not found studies reporting laterality assessment on the morphology and function in rat gastrocnemius, our study aimed to evaluate the fibre histochemical, morphometrical and muscle force contractile properties between right and left gastrocnemius of the laboratory rat. Fibre‐type proportion, fibre morphometrical measurements, muscle capillarization and muscle force properties were analysed in the right and left gastrocnemius of six male rats. No statistically significant differences (p = 0.265) were found in gastrocnemius to body weight ratio (‰) between right (6.55 ± 0.40) and left (6.49 ± 0.40) muscles. The muscles analysed showed a great degree of heterogeneity in fibre type distribution, having three clearly distinguished regions named red, mixed and white. In the three regions, there were no statistical differences in fibre type proportions between right and left gastrocnemius, as is indicated by the p‐values (from 0.203 to 0.941) obtained after running t‐Student paired tests for each fibre type. When analysing fibre cross‐sectional area, individual fibre capillarization and fibre circularity, no significant differences between right and left gastrocnemius in any of these morphometrical parameters were found in any muscle region or fibre type. Most of the p‐values (70%) resulting from running t‐Student paired tests were higher than 0.400, and the lowest p‐value was 0.115. Seemingly, global capillary and fibre densities were not statistically different between right and left sides in all muscle regions with p‐values ranging from 0.337 to 0.812. Force parameters normalized to gastrocnemius mass (mN g⁻¹) did not show any significant difference between right (PF = 74.0 ± 13.4, TF = 219.4 ± 13.0) and left (PF = 70.9 ± 10.7, TF = 213.0 ± 18.0) muscles with p = 0.623 (PF) and p = 0.514 (TF). Twitch time parameters (ms) also lacked significant differences between the two sides (CT: 43.4 ± 8.6 vs. 45.0 ± 14.3, p = 0.639; HRT: 77.6 ± 15.0 vs. 82.3 ± 25.3, p = 0.475). Finally, both muscles also showed similar (p = 0.718) fatigue properties. We did find an absence of laterality at the morphological and functional levels, which raises the possibility of using right and left gastrocnemius muscles interchangeably for experimental designs where one muscle is used to analyse data after a physiological intervention and its contralateral muscle plays the control role, thus allowing unbiased paired comparisons to derive accurate conclusions.

Architectural model for muscle growth during maturation

Muscle architecture, which includes parameters like fascicle length, pennation angle, and physiological cross-sectional area, strongly influences skeletal muscles' mechanical properties. During maturation, the muscle architecture has to adapt to a growing organism. This study aimed to develop an architectural model capable of predicting the complete 3D fascicle architecture for primarily unipennate muscles of an arbitrary age, based on fascicle data for an initial age. For model development, we collected novel data on 3D muscle architecture of the rabbit (Oryctolagus cuniculus) M. plantaris of eight animals ranging in age from 29 to 106 days. Experimental results show that plantaris muscle belly length increases by 73%, whereas mean fascicle length and mean pennation angle increases by 39 and 14%, respectively. Those changes were incorporated into the model. In addition to the data collected for M. plantaris the predictions of the model were compared to existing literature data of rabbit M. soleus and M. gastrocnemius medialis. With an error of −1.0 ± 8.6% for relative differences in aponeurosis length, aponeurosis width, muscle height, and muscle mass, the model delivered good results matching interindividual differences. For future studies, the model could be utilized to generate realistic architectural data sets for simulation studies.

Effect of muscle stimulation intensity on the heterogeneous function of regions within an architecturally complex muscle

Skeletal muscle has fiber architectures ranging from simple to complex, alongside variations in fiber-type and neuro-anatomical compartmentalization. However, the functional implications of muscle subdivision into discrete functional units remain poorly understood. The rat medial gastrocnemius has well-characterized regions with distinct architectures and fiber type composition. Here, force-length and force-velocity contractions were performed for two stimulation intensities (supramaximal and submaximal) and for three structural units (whole muscle belly, proximal region, and distal region) to assess the effect of muscle compartmentalization on contractile force-length-velocity relationships and optimal speed for power production. Additionally, fiber strain, fiber rotation, pennation, and architectural gearing were quantified. Our results suggest that the proximal and distal muscle regions have fundamentally different physiological function. During supramaximal activation, the proximal region has shorter (8.4 ± 0.8 mm versus 10.9 ± 0.7 mm) fibers and steeper (28.7 ± 11.0° versus 19.6 ± 6.3°) fiber angles at optimum length, and operates over a larger (17.9 ± 3.8% versus 12.6 ± 2.7%) range of its force-length curve. The proximal region also exhibits larger changes in pennation angle (5.6 ± 2.2°/mm versus 2.4 ± 1.5°/mm muscle shortening) and architectural gearing (1.82 ± 0.53 versus 1.25 ± 0.24), whereas the distal region exhibits greater peak shortening speed (96.0 mm/s versus 81.3 mm/s) and 18-27% greater optimal speed. Overall, similar patterns were observed during submaximal activation. These regional differences in physiological function with respect to the whole muscle highlight how variation in motor recruitment could fundamentally shift regional functional patterns within a single muscle, which likely has important implications for whole muscle force and work output in vivo.NEW & NOTEWORTHY We show that muscle compartmentalization can influence whole muscle contractile properties, with slower-fibered proximal rat medial gastrocnemius undergoing larger changes in pennation angle and architectural gearing, whereas the faster-fibered distal region achieves greater peak and optimal shortening velocity, and power output. Consequently, regional variation in motor recruitment can fundamentally influence functional patterns within a single muscle.

Three-dimensional modelling of human quadriceps femoris forces

Quadriceps intramuscular anatomy is typically described in two dimensions. However, anatomical descriptions indicate fascicles in the quadriceps may have a three-dimensional orientation. The purpose of this investigation was to quantify the maximum force generating capacity of the individual quadriceps' muscles in three dimensions. Muscle architectural parameters were obtained from three cadaver specimens (two female) and input into a geometry-based multiple fascicle muscle force model. Vastus lateralis, vastus medialis, and rectus femoris had partitions which could be defined based on differences in the sense and direction of fascicles between partitions. Vastus lateralis and rectus femoris were bipennate due to partitions sharing an aponeurosis. Vastus lateralis deep and superficial partitions exerted posterior- (maximum: -29 ± 5 N) and anterior-directed (maximum: 58 ± 15 N) forces on their shared distal aponeurosis. Rectus femoris medial and lateral partitions exerted medial- (maximum: -38 ± 17 N) and lateral-directed (maximum: 19 ± 12 N) forces on their shared proximal aponeurosis. All vastus medialis fascicles ran along the proximal-distal axis. However, fascicles arising near the lesser trochanter also ran along the superficial-deep axis, while fascicles arising from the linea aspera ran along the medial-lateral axis. Thus, vastus medialis could be divided into longus and oblique partitions. Due to the large pennation angle, vastus medialis oblique could exert maximum medial-directed (-219 ± 93 N) and proximal-directed (279 ± 168 N) forces at approximately -40° and -70° knee flexion, respectively, indicating dual roles for vastus medialis oblique dependent on knee flexion angle.

The Effect of Multidirectional Loading on Contractions of the M. Medial Gastrocnemius

Research has shown that compression of muscle can lead to a change in muscle force. Most studies show compression to lead to a reduction in muscle force, although recent research has shown that increases are also possible. Based on methodological differences in the loading design between studies, it seems that muscle length and the direction of transverse loading influence the effect of muscle compression on force production. Thus, in our current study we implement these two factors to influence the effects of muscle loading. In contrast to long resting length of the medial gastrocnemius (MG) in most studies, we use a shorter MG resting length by having participant seated with their knees at a 90° angle. Where previous studies have used unidirectional loads to compress the MG, in this study we applied a multidirectional load using a sling setup. Multidirectional loading using a sling setup has been shown to cause muscle force reductions in previous research. As a result of our choices in experimental design we observed changes in the effects of muscle loading compared to previous research. In the present study we observed no changes in muscle force due to muscle loading. Muscle thickness and pennation angle showed minor but significant increases during contraction. However, no significant changes occurred between unloaded and loaded trials. Fascicle thickness and length showed different patterns of change compared to previous research. We show that muscle loading does not result in force reduction in all situations and is possibly linked to differences in muscle architecture and muscle length.

Ultrasound-derived changes in thickness of human ankle plantar flexor muscles during walking and running are not homogeneous along the muscle mid-belly region

Skeletal muscle thickness is a valuable indicator of several aspects of a muscle’s functional capabilities. We used computational analysis of ultrasound images, recorded from 10 humans walking and running at a range of speeds (0.7–5.0 m s⁻¹), to quantify interactions in thickness change between three ankle plantar flexor muscles (soleus, medial and lateral gastrocnemius) and quantify thickness changes at multiple muscle sites within each image. Statistical analysis of thickness change as a function of stride cycle (1d statistical parametric mapping) revealed significant differences between soleus and both gastrocnemii across the whole stride cycle as they bulged within the shared anatomical space. Within each muscle, changes in thickness differed between measurement sites but not locomotor condition. For some of the stride, thickness measures taken from the distal-mid image region represented the mean muscle thickness, which may therefore be a reliable region for these measures. Assumptions that muscle thickness is constant during a task, often made in musculoskeletal models, do not hold for the muscles and locomotor conditions studied here and researchers should not assume that a single thickness measure, from one point of the stride cycle or a static image, represents muscle thickness during dynamic movements.

Passive changes in muscle length

This review, the first in a series of minireviews on the passive mechanical properties of skeletal muscles, seeks to summarize what is known about the muscle deformations that allow relaxed muscles to lengthen and shorten. Most obviously, when a muscle lengthens, muscle fascicles elongate, but this is not the only mechanism by which muscles change their length. In pennate muscles, elongation of muscle fascicles is accompanied by changes in pennation and changes in fascicle curvature, both of which may contribute to changes in muscle length. The contributions of these mechanisms to change in muscle length are usually small under passive conditions. In very pennate muscles with long aponeuroses, fascicle shear could contribute substantially to changes in muscle length. Tendons experience moderate axial strains even under passive loads, and, because tendons are often much longer than muscle fibers, even moderate tendon strains may contribute substantially to changes in muscle length. Data obtained with new imaging techniques suggest that muscle fascicle and aponeurosis strains are highly nonuniform, but this is yet to be confirmed. The development, validation, and interpretation of continuum muscle models informed by rigorous measurements of muscle architecture and material properties should provide further insights into the mechanisms that allow relaxed muscles to lengthen and shorten.

Passive and dynamic muscle architecture during transverse loading for gastrocnemius medialis in man

External forces from our environment impose transverse loads on our muscles. Studies in rats have shown that transverse loads result in a decrease in the longitudinal muscle force. Changes in muscle architecture during contraction may contribute to the observed force decrease. The aim of this study was to quantify changes in pennation angle, fascicle dimensions, and muscle thickness during contraction under external transverse load. Electrical stimuli were elicited to evoke maximal force twitches in the right calf muscles of humans. Trials were conducted with transverse loads of 2, 4.5, and 10 kg. An ultrasound probe was placed on the medial gastrocnemius in line with the transverse load to quantify muscle characteristics during muscle twitches. Maximum twitch force decreased with increased transverse muscle loading. The 2, 4.5, and 10 kg of transverse load showed a 9, 13, and 16% decrease in longitudinal force, respectively. Within the field of view of the ultrasound images, and thus directly beneath the external load, loading of the muscle resulted in a decrease in the muscle thickness and pennation angle, with higher loads causing greater decreases. During twitches the muscle transiently increased in thickness and pennation angle, as did fascicle thickness. Higher transverse loads showed a reduced increase in muscle thickness. Smaller increases in pennation angle and fascicle thickness strain also occurred with higher transverse loads. This study shows that increased transverse loading caused a decrease in ankle moment, muscle thickness, and pennation angle, as well as transverse deformation of the fascicles.

Impact of Multidirectional Transverse Calf Muscle Loading on Calf Muscle Force in Young Adults

It has been demonstrated that unidirectional transversal muscle loading induced by a plunger influences muscle shape and reduces muscle force. The interaction between muscle and transversal forces may depend on specific neuromuscular properties that change during a lifetime. Compression garments, applying forces from all directions in the transverse plane, are widely used in sports for example to improve performance. Differences in the loading direction (unidirectional vs. multidirectional) may have an impact on force generating capacity of muscle and, thus, on muscle performance. The aim of this study was to examine the effect of multidirectional transversal loads, using a sling looped around the calf, on the isometric force during plantarflexions. Young male adults (25.7 ± 1.5 years, n = 15) were placed in a prone position in a calf press apparatus. The posterior tibial nerve was stimulated to obtain the maximal double-twitch force of the calf muscles with (59.4 and 108.4 N) and without multidirectional transverse load. Compared to the unloaded condition, the rate of force development (RFD) was reduced by 5.0 ± 8.1% (p = 0.048) and 6.9 ± 10.7% (p = 0.008) for the 59.4 and 108.4 N load, respectively. No significant reduction (3.2 ± 4.8%, p = 0.141) in maximum muscle force (Fm ) was found for the lower load (59.4 N), but application of the higher load (108.4 N) resulted in a significant reduction of Fm by 4.8 ± 7.0% (p = 0.008). Mean pressures induced in this study (14.3 and 26.3 mm Hg corresponding to the 59.4 and 108.4 N loads, respectively) are within the pressure range reported for compression garments. Taking the results of the present study into account, a reduction in maximum muscle force would be expected for compression garments with pressures ≥26.3 mm Hg. However, it should be noted that the loading condition (sling vs. compression garment) differs and that compression garments may influence other mechanisms contributing to force generation. For example, wearing compression garments may enhance sport performance by enhanced proprioception and reduced muscle oscillation. Thus, superposition of several effects should be considered when analyzing the impact of compression garments on more complex sport performance.