Effect of the addition of diurethane dimethacrylate on the chemical and mechanical properties of tBA-PEGDMA acrylate based shape memory polymer network

A review of chitosan-based shape memory materials: Stimuli-responsiveness, multifunctionalities and applications

Shape memory polymers (SMPs), as a type of smart materials, possess the unique shape memory and deformation recovery abilities. Hence, SMPs have been attracted extensive attentions and widely used in fields of electric devices, aerospace structures and biomedical engineering. Chitosan (CS), as a renewable natural biomass material, exhibits the excellent biocompatibility, biodegradability and antibacterial activities. Using biomass CS as SMPs matrix materials could greatly enhance the environmental friendliness and adaptability, promoting the applications in fields of biomedical engineering and smart devices. This paper provides a detailed overview of current research progress about CS-based SMPs, including diverse stimuli responsiveness, multifunctionalities and various applications. Though, the research on CS-based SMPs is still in the early stage, which exhibits extensive prospect and potential, and could be of significance in advancing smart biomedical technologies.

Kinetics of UV Radiation-Induced Fast Collapse and Recovery in Thermally Cycled and Rehydrated Light- and Thermo- Double-Responsive Copolymer Films Probed by In Situ Neutron Reflectivity

The kinetics of UV radiation-induced fast collapse and recovery in thermally cycled and rehydrated light- and thermo- double-responsive copolymer films of poly(oligo(ethylene glycol) methyl ether methacrylate-co-6-(4-phenylazophenoxy)hexyl acrylate), abbreviated as P(OEGMA₃₀₀-co-PAHA), are probed by in situ neutron reflectivity (NR). The copolymer film is exposed to a thermal treatment starting at a temperature of 60 °C, which is well above its transition temperature (TT = 53 °C) before the temperature is rapidly decreased from 60 to 23 °C. Based on the applied protocol, the initially collapsed P(OEGMA₃₀₀-co-PAHA) film is rehydrated due to the switching of polymer chains from a more hydrophobic to a more hydrophilic state when the temperature falls below its TT. The whole rehydration process can be divided into 3 stages: D₂O absorption, chain rearrangement, and film reswelling. After rehydration, the thermally cycled P(OEGMA₃₀₀-co-PAHA) film is switched by UV irradiation via setting the UV radiation on and off. Considering the UV-induced collapse and recovery, both processes are slower than those observed in freshly hydrated films without any thermal stimulus history. Therefore, the experienced thermal history of the film should be considered in the design of sensors and detectors based on double-responsive copolymer films.

Qualifying the contribution of fiber diameter on the acrylate-based electrospun shape memory polymer nano/microfiber properties

Fibrous shape memory polymers (SMPs) have received growing interest in various applications, especially in biomedical applications, which offer new structures at the microscopic level and the potential of enhanced shape deformation of SMPs. In this paper, we report on the development and investigation of the properties of acrylate-based shape memory polymer fibers, fabricated by electrospinning technology with the addition of polystyrene (PS). Fibers with different diameters are manufactured using four different PS solution concentrations (25, 30, 35, and 40 wt%) and three flow rates (1.0, 2.5, and 5.0 μL min⁻¹) with a 25 kV applied voltage and 17 cm electrospinning distance. Scanning electron microscope (SEM) images reveal that the average fiber diameter varies with polymer concentration and flow rates, ranging from 0.655 ± 0.376 to 4.975 ± 1.634 μm. Dynamic mechanical analysis (DMA) and stress–strain testing present that the glass transition temperature and tensile values are affected by fiber diameter distribution. The cyclic bending test directly proves that the electrospun SMP fiber webs are able to fully recover; additionally, the recovery speed is also affected by fiber diameter. With the combination of the SMP material and electrospinning technology, this work paves the way in designing and optimizing future SMP fibers properties by adjusting the fiber diameter.

In this work, we report the fabrication of fibrous acrylate-based shape memory polymers (SMPs), which can adjust shape recoverability by optimizing the fiber diameter by changing electrospinning parameters.

Anti-Microbial and Remineralizing Properties of Self-Adhesive Orthodontic Resin Containing Mesoporous Bioactive Glass

Self-adhesive resins (SARs) contain adhesives, which simplify the procedures of resin application, and primers, which provide sufficient bonding ability. In this study, mesoporous bioactive glass nanoparticles (MBN) were added to a SAR to easily improve the physical properties and remineralization ability. The experimental resins comprised 1%, 3%, and 5% MBN mixed in Ortho Connect Flow (GC Corp, Tokyo, Japan). As the MBN content in the SAR increased, the microhardness increased, and a statistically significant difference was observed between the cases of 1% and 5% MBN addition. Shear bond strength increased for 1% and 3% MBN samples and decreased for 5% MBN. The addition of MBN indicated a statistically significant antibacterial effect on both gram-negative and gram-positive bacteria. The anti-demineralization experiment showed that the remineralization length increased with the MBN content of the sample. Through the above results, we found that SAR containing MBN has antibacterial and remineralization effects. Thus, by adding MBN to the SAR, we investigated the possibility of orthodontic resin development, wherein the strength is enhanced and the drawbacks of the conventional SAR addressed.

Ductile Shape-Memory Polymer Composite with Enhanced Shape Recovery Ability

In recent years, shape-memory polymers (SMPs) have received extensive attention to be used as actuators in a broad range of applications such as medical and robotic devices. Their ability to recover large deformations and their capability to be stimulated remotely have made SMPs a superior choice among different smart materials in various applications. In this study, a ductile SMP composite with enhanced shape recovery ability is synthesized and characterized. This SMP composite is made by a mixture of acrylate-based crosslinkers and monomers, as well as polystyrene (PS) with UV curing. The composite can achieve almost 100% shape recovery in 2 s by hot water or hot air. This shape recovery speed is much faster than typical acrylate-based SMPs. In addition, the composite shows excellent ductility and viscoelasticity with reduced hardness. Molecular dynamics (MD) simulations are performed for understanding the curing mechanism of this composite. With the combination of the experimental and computational works, this study paves the way in front of designing and optimizing the future SMP devices.