Anisotropic mechanical characterization of human skin by in vivo multi-axial ring suction test

Bioprinting of human dermal microtissues precursors as building blocks for endogenousin vitroconnective tissue manufacturing

The advent of 3D bioprinting technologies in tissue engineering has unlocked the potential to fabricatein vitrotissue models, overcoming the constraints associated with the shape limitations of preformed scaffolds. However, achieving an accurate mimicry of complex tissue microenvironments, encompassing cellular and biochemical components, and orchestrating their supramolecular assembly to form hierarchical structures while maintaining control over tissue formation, is crucial for gaining deeper insights into tissue repair and regeneration. Building upon our expertise in developing competent three-dimensional tissue equivalents (e.g. skin, gut, cervix), we established a two-step bottom-up approach involving the dynamic assembly of microtissue precursors (μTPs) to generate macroscopic functional tissue composed of cell-secreted extracellular matrix (ECM). To enhance precision and scalability, we integrated extrusion-based bioprinting technology into our established paradigm to automate, control and guide the coherent assembly ofμTPs into predefined shapes. Compared to cell-aggregated bioink, ourμTPs represent a functional unit where cells are embedded in their specific ECM.μTPs were derived from human dermal fibroblasts dynamically seeded onto gelatin-based microbeads. After 9 days,μTPs were suspended (50% v/v) in Pluronic-F127 (30% w/v) (µTP:P30), and the obtained formulation was loaded as bioink into the syringe of the Dr.INVIVO-4D6 extrusion based bioprinter.µTP:P30 bioink showed shear-thinning behavior and temperature-dependent viscosity (gel atT> 30 °C), ensuringµTPs homogenous dispersion within the gel and optimal printability. The bioprinting involved extruding several geometries (line, circle, and square) into Pluronic-F127 (40% w/v) (P40) support bath, leveraging its shear-recovery property. P40 effectively held the bioink throughout and after the bioprinting procedure, untilµTPs fused into a continuous connective tissue.µTPs fusion dynamics was studied over 8 days of culture, while the resulting endogenous construct underwent 28 days culture. Histological, immunofluorescence analysis, and second harmonic generation reconstruction revealed an increase in endogenous collagen and fibronectin production within the bioprinted construct, closely resembling the composition of the native connective tissues.

Noninvasive identification of directionally-dependent elastic properties of soft tissues using full-field optical data

This paper introduces an innovative approach for elastic property characterization of soft tissues, having directional-dependent material behavior, via their vibration response measurement and interpretation. The full-field time-dependent surface displacements as a result of externally excited soft tissues are collected through digital image correlation (DIC). A developed analytical model, capturing the low-amplitude vibration behavior of anisotropic layered human skin with the incorporation of the influence of subcutaneous elasticity and inertia, is employed to accurately predict its resonant frequencies and pertaining displacement field images. An efficient solution approach for the model is implemented into an inverse algorithm to rapidly characterize the anisotropic elastic properties based on importing the vibration characteristics. To show the merit of the approach, a 3-D finite element (FE) simulation model was used to generate full-field data, detected and matched with a set of specific vibration modes via modal assurance criterion (MAC). The validity of the model implemented into the inverse characterization algorithm is demonstrated through a comparison of predicted vibration frequencies and mode-shapes simulated via the 3-D FE model for different cases with anisotropic elastic properties in different layers of the skin. It is shown that modes are influenced differently when anisotropic properties are introduced to the model. Thus, the established inverse characterization algorithm is capable of rapidly predicting the elastic material properties of anisotropic soft sheets with adequate accuracy.

Parallelogram Excision: An Algorithmic Approach for Excision Designs in High-Tension Skin Areas

INTRODUCTION

The excision of lesions that are not oriented along the skin tension lines may cause the surgeon to design extremely broad elliptical preoperative markings, with the intent to follow the tension lines as recommended for the best postoperative course and the best quality scars. The aim of this study is to describe and clinically apply a new surgical technique called the parallelogram excision technique, in which the traditional ellipse with a major axis parallel to the tension lines is converted into a parallelogram whose lesser sides are coincident with the local skin tension lines. This technique was specifically conceived for lesions whose major axis is non-coincident with skin tension lines, and the primary advantage is that it reduces the amount of healthy tissue excised.

METHODS

Preliminarily to this clinical study, a comparative geometrical analysis was conducted between various excision shapes and angles using Geometry Pad version 2.7.10 (Bytes Arithmetic LLC) and verifying the data obtained through AutoCAD 2D 2016 (Autodesk, San Rafael, CA, USA), with the purpose of optimizing the technique from a geometrical point of view. A comparison was performed between the theoretical traditional elliptical excision and the hypothetical parallelogram excision. A pilot proof of concept clinical study was performed to verify the validity of the excisional design proposed. The patients considered for parallelogram excision suffered from skin lesions with a diameter no greater than 4 cm and oriented 45° to 60° with respect to tension lines. In order to limit variability, patients' ages were between 40 and 80, and the selected areas were limbs, sternum and dorsum. Scar quality was assessed with the validated POSAS method at 6 months post-operation.

RESULTS

The geometrical analysis of the parallelogram's design showed that it allows a diminution of the excised healthy skin compared to the traditional ellipse. The clinical series included 16 patients, with a mean age of 63.5. Of these, nine patients were men and seven were women. Diagnoses included basal cell carcinoma in seven cases, dysplastic naevus in five patients, Bowen's disease in three individuals, and one case where a wider excision of a malignant melanoma was performed. Six-month follow up results showed: (1) an uneventful postoperative course; (2) good scar healing with an observer's POSAS median score of 16 and a patient's POSAS median score of 19; and (3) complete excision of lesions.

CONCLUSIONS

When indicated, the parallelogram excision technique appears to be a good option for the excision and primary closure of skin lesions that are not parallel to skin tension lines, since it allows a reproducible and surgeon-friendly method of preoperative marking and implies a favorable use of the local tension, which determines good quality scars. The amount of healthy tissue removed is smaller compared to traditional elliptic excisions.