Helium-rich mixtures for improved batch-mode clinical-scale spin-exchange optical pumping of Xenon-129

Pilot Quality-Assurance Study of a Third-Generation Batch-Mode Clinical-Scale Automated Xenon-129 Hyperpolarizer

We present a pilot quality assurance (QA) study of a clinical-scale, automated, third-generation (GEN-3) ¹²⁹Xe hyperpolarizer employing batch-mode spin-exchange optical pumping (SEOP) with high-Xe densities (50% natural abundance Xe and 50% N₂ in ~2.6 atm total pressure sourced from Nova Gas Technologies) and rapid temperature ramping enabled by an aluminum heating jacket surrounding the 0.5 L SEOP cell. ¹²⁹Xe hyperpolarization was performed over the course of 700 gas loading cycles of the SEOP cell, simulating long-term hyperpolarized contrast agent production in a clinical lung imaging setting. High levels of ¹²⁹Xe polarization (avg. %P_Xe = 51.0% with standard deviation σ_PXe = 3.0%) were recorded with fast ¹²⁹Xe polarization build-up time constants (avg. T_b = 25.1 min with standard deviation σ_Tb = 3.1 min) across the first 500 SEOP cell refills, using moderate temperatures of 75 °C. These results demonstrate a more than 2-fold increase in build-up rate relative to previously demonstrated results in a comparable QA study on a second-generation (GEN-2) ¹²⁹Xe hyperpolarizer device, with only a minor reduction in maximum achievable %P_Xe and with greater consistency over a larger number of SEOP cell refill processes at a similar polarization lifetime duration (avg. T₁ = 82.4 min, standard deviation σ_T1 = 10.8 min). Additionally, the effects of varying SEOP jacket temperatures, distribution of Rb metal, and preparation and operation of the fluid path are quantified in the context of device installation, performance optimization and maintenance to consistently produce high ¹²⁹Xe polarization values, build-up rates (T_b as low as 6 min) and lifetimes over the course of a typical high-throughput ¹²⁹Xe polarization SEOP cell life cycle. The results presented further demonstrate the significant potential for hyperpolarized ¹²⁹Xe contrast agent in imaging and bio-sensing applications on a clinical scale.

Enabling Clinical Technologies for Hyperpolarized 129 Xenon Magnetic Resonance Imaging and Spectroscopy

Hyperpolarization is a technique that can increase nuclear spin polarization with the corresponding gains in nuclear magnetic resonance (NMR) signals by 4-8 orders of magnitude. When this process is applied to biologically relevant samples, the hyperpolarized molecules can be used as exogenous magnetic resonance imaging (MRI) contrast agents. A technique called spin-exchange optical pumping (SEOP) can be applied to hyperpolarize noble gases such as 129 Xe. Techniques based on hyperpolarized 129 Xe are poised to revolutionize clinical lung imaging, offering a non-ionizing, high-contrast alternative to computed tomography (CT) imaging and conventional proton MRI. Moreover, CT and conventional proton MRI report on lung tissue structure but provide little functional information. On the other hand, when a subject breathes hyperpolarized 129 Xe gas, functional lung images reporting on lung ventilation, perfusion and diffusion with 3D readout can be obtained in seconds. In this Review, the physics of SEOP is discussed and the different production modalities are explained in the context of their clinical application. We also briefly compare SEOP to other hyperpolarization methods and conclude this paper with the outlook for biomedical applications of hyperpolarized 129 Xe to lung imaging and beyond.

Automated Low-Cost In Situ IR and NMR Spectroscopy Characterization of Clinical-Scale 129Xe Spin-Exchange Optical Pumping

We present on the utility of in situ nuclear magnetic resonance (NMR) and near-infrared (NIR) spectroscopic techniques for automated advanced analysis of the ¹²⁹Xe hyperpolarization process during spin-exchange optical pumping (SEOP). The developed software protocol, written in the MATLAB programming language, facilitates detailed characterization of hyperpolarized contrast agent production efficiency based on determination of key performance indicators, including the maximum achievable ¹²⁹Xe polarization, steady-state Rb-¹²⁹Xe spin-exchange and ¹²⁹Xe polarization build-up rates, ¹²⁹Xe spin-relaxation rates, and estimates of steady-state Rb electron polarization. Mapping the dynamics of ¹²⁹Xe polarization and relaxation as a function of SEOP temperature enables systematic optimization of the batch-mode SEOP process. The automated analysis of a typical experimental data set, encompassing ∼300 raw NMR and NIR spectra combined across six different SEOP temperatures, can be performed in under 5 min on a laptop computer. The protocol is designed to be robust in operation on any batch-mode SEOP hyperpolarizer device. In particular, we demonstrate the implementation of a combination of low-cost NIR and low-frequency NMR spectrometers (∼$1,100 and ∼$300 respectively, ca. 2020) for use in the described protocols. The demonstrated methodology will aid in the characterization of NMR hyperpolarization hardware in the context of SEOP and other hyperpolarization techniques for more robust and less expensive clinical production of HP ¹²⁹Xe and other contrast agents.

In vivo methods and applications of xenon-129 magnetic resonance

Hyperpolarised gas lung MRI using xenon-129 can provide detailed 3D images of the ventilated lung airspaces, and can be applied to quantify lung microstructure and detailed aspects of lung function such as gas exchange. It is sensitive to functional and structural changes in early lung disease and can be used in longitudinal studies of disease progression and therapy response. The ability of 129Xe to dissolve into the blood stream and its chemical shift sensitivity to its local environment allow monitoring of gas exchange in the lungs, perfusion of the brain and kidneys, and blood oxygenation. This article reviews the methods and applications of in vivo129Xe MR in humans, with a focus on the physics of polarisation by optical pumping, radiofrequency coil and pulse sequence design, and the in vivo applications of 129Xe MRI and MRS to examine lung ventilation, microstructure and gas exchange, blood oxygenation, and perfusion of the brain and kidneys.

XeUS: A second-generation automated open-source batch-mode clinical-scale hyperpolarizer

We present a second-generation open-source automated batch-mode ¹²⁹Xe hyperpolarizer (XeUS GEN-2), designed for clinical-scale hyperpolarized (HP) ¹²⁹Xe production via spin-exchange optical pumping (SEOP) in the regimes of high Xe density (0.66-2.5 atm partial pressure) and resonant photon flux (~170 W, Δλ = 0.154 nm FWHM), without the need for cryo-collection typically employed by continuous-flow hyperpolarizers. An Arduino micro-controller was used for hyperpolarizer operation. Processing open-source software was employed to program a custom graphical user interface (GUI), capable of remote automation. The Arduino Integrated Development Environment (IDE) was used to design a variety of customized automation sequences such as temperature ramping, NMR signal acquisition, and SEOP cell refilling for increased reliability. A polycarbonate 3D-printed oven equipped with a thermo-electric cooler/heater provides thermal stability for SEOP for both binary (Xe/N₂) and ternary (⁴He-containing) SEOP cell gas mixtures. Quantitative studies of the ¹²⁹Xe hyperpolarization process demonstrate that near-unity polarization can be achieved in a 0.5 L SEOP cell. For example, %P_Xe of 93.2 ± 2.9% is achieved at 0.66 atm Xe pressure with polarization build-up rate constant γ_SEOP = 0.040 ± 0.005 min^-1, giving a max dose equivalent ≈ 0.11 L/h 100% hyperpolarized, 100% enriched ¹²⁹Xe; %P_Xe of 72.6 ± 1.4% is achieved at 1.75 atm Xe pressure with γ_SEOP of 0.041 ± 0.001 min^-1, yielding a corresponding max dose equivalent of 0.27 L/h. Quality assurance studies on this device have demonstrated the potential to refill SEOP cells hundreds of times without significant losses in performance, with average %P_Xe = 71.7%, (standard deviation σ_P = 1.52%) and mean polarization lifetime T₁ = 90.5 min, (standard deviation σ_T = 10.3 min) over the first ~200 gas mixture refills, with sufficient performance maintained across a further ~700 refills. These findings highlight numerous technological developments and have significant translational relevance for efficient production of gaseous HP ¹²⁹Xe contrast agents for use in clinical imaging and bio-sensing techniques.