Versatile high-pressure gas apparatus for benchtop NMR: Design and selected applications

Efficient method for in situ agitation of liquids directly inside NMR spectrometer

The objective of the method is to allow agitation and fast homogenization of liquid systems in NMR tubes, directly inside the NMR spectrometer. The setup makes it possible to record spectra of samples that are macroscopically not stable, as dispersions of large particles. It makes also possible to fasten the homogeneization of liquid during a reaction or a phase transition. In the present paper, the method has been evaluated using homogeneous liquid extraction (HLLE). This configuration can also be used to introduce gases in different systems to perform various types of experiments. The set up consists in a Teflon tube inserted in the NMR tube bringing gas that yields agitation by bubbling. The gas flow is tuned using an electronically operated valve connected to gas line and to the NMR console. The method details how to reach proper homogenization without any perturbation, as liquid leaks.•An easy method for agitation of liquids inside NMR spectrometers.•The set up can be used for the insertion of gases in the NMR tube inside the spectrometer.•The method allows the study of the mixing of biphasic systems by NMR techniques.

SABRE Hyperpolarization with up to 200 bar Parahydrogen in Standard and Quickly Removable Solvents

Parahydrogen (p-H2)-based techniques are known to drastically enhance NMR signals but are usually limited by p-H2 supply. This work reports p-H2-based SABRE hyperpolarization at p-H2 pressures of hundreds of bar, far beyond the typical ten bar currently reported in the literature. A recently designed high-pressure setup was utilized to compress p-H2 gas up to 200 bar. The measurements were conducted using a sapphire high-pressure NMR tube and a 43 MHz benchtop NMR spectrometer. In standard methanol solutions, it could be shown that the signal intensities increased with pressure until they eventually reached a plateau. A polarization of about 2%, equal to a molar polarization of 1.2 mmol L-1, could be achieved for the sample with the highest substrate concentration. While the signal plateaued, the H2 solubility increased linearly with pressure from 1 to 200 bar, indicating that p-H2 availability is not the limiting factor in signal enhancement beyond a certain pressure, depending on sample composition. Furthermore, the possibility of using liquefied ethane and compressed CO2 as removable solvents for hyperpolarization was demonstrated. The use of high pressures together with quickly removable organic/non-organic solvents represents an important breakthrough in the field of hyperpolarization, advancing SABRE as a promising tool for materials science, biophysics, and molecular imaging.

Analysis of Aging Products from Biofuels in Long-Term Storage

The long-term aging processes during storage of different heating oils and their blends with biofuels including fatty acid methyl ester, hydrogenated vegetable oil, and power-to-liquids products were followed by different analytical techniques, and the aging products were analyzed. While most standard techniques are time-consuming and labor-intensive and specify only a single property, analyses by benchtop nuclear magnetic resonance spectroscopy proved to be effortless and fast. Moreover, only 0.4 mL of the sample is required for nondestructive NMR measurements. White and waxlike precipitates were found in FAME stored at a cold temperature and identified as esters of glycerol with saturated side chains by chromatographic, thermal, and spectroscopic analyses. At colder temperatures, they reversibly precipitate and can lead to system failure.

Refined high-pressure tube design for improved resolution in high-pressure NMR spectroscopy

A simple, low-cost, and easy-to-replicate high-pressure sapphire tube for NMR spectroscopy experiments is introduced. The significant improvement in spectral resolution enables, e.g., in situ quantification of the H2 ingress in green solvents.