Accessory to dissipate heat from transcranial magnetic stimulation coils

Multi-objective optimization method for coil current waveform of transcranial magnetic stimulation

Transcranial magnetic stimulation (TMS) has been proved to be effective in the treatment of many kinds of mental diseases. However, the clicking noise produced by the pulse current with large amplitude and short duration in the TMS coil may damage the hearing of patients. The heat produced by the high-frequency pulse current in the coil also reduces the efficiency of TMS equipment. A multi-objective waveform optimization method to improve heat and noise problems at the same time is presented. By analyzing the current waveforms of TMS, the relationship between the current and the vibration energy/Joule heating is established. Taking the Joule heating and the vibration energy as the optimization objectives, exceeding the same amount of neuronal membrane potential as the limiting condition, the Pareto fronts of different current models are obtained by applying the multi-objective particle swarm optimization algorithm (MOPSO). Therefore, the corresponding current waveforms are inversely deduced. A ringing suppression cTMS (RS-cTMS) proof-of-principle experimental platform is constructed. The feasibility of the proposed method is validated through experiments. The results show that the optimized current waveforms can greatly reduce the vibration and heating of the coil compared with the conventional full-sine, recified sine and half-sine waveforms, thus reducing the pulse noise and prolonging the using time of the equipment. The optimized diversified waveforms also provide a reference for the diversity of TMS.

Devices and Technology in Transcranial Magnetic Stimulation: A Systematic Review

The technology for transcranial magnetic stimulation (TMS) has significantly changed over the years, with important improvements in the signal generators, the coils, the positioning systems, and the software for modeling, optimization, and therapy planning. In this systematic literature review (SLR), the evolution of each component of TMS technology is presented and analyzed to assess the limitations to overcome. This SLR was carried out following the PRISMA 2020 statement. Published articles of TMS were searched for in four databases (Web of Science, PubMed, Scopus, IEEE). Conference papers and other reviews were excluded. Records were filtered using terms about TMS technology with a semi-automatic software; articles that did not present new technology developments were excluded manually. After this screening, 101 records were included, with 19 articles proposing new stimulator designs (18.8%), 46 presenting or adapting coils (45.5%), 18 proposing systems for coil placement (17.8%), and 43 implementing algorithms for coil optimization (42.6%). The articles were blindly classified by the authors to reduce the risk of bias. However, our results could have been influenced by our research interests, which would affect conclusions for applications in psychiatric and neurological diseases. Our analysis indicates that more emphasis should be placed on optimizing the current technology with a special focus on the experimental validation of models. With this review, we expect to establish the base for future TMS technological developments.

Coil efficiency for inductive peripheral nerve stimulation

Magnetic stimulation of peripheral nerves is evoked by electric field gradients caused by high-intensity, pulsed magnetic fields created from a coil. Currents required for stimulation are very high, therefore devices are large, expensive, and often too complex for many applications like rehabilitation therapy. For repetitive stimulation, coil heating due to power loss poses a further limitation. The geometry of the magnetic coil determines field depth and focality, making it the most important factor that determines the current required for neuronal excitation. However, the comparison between different coil geometries is difficult and depends on the specific application. Especially the distance between nerve and coil plays a crucial role. In this investigation, the electric field distribution of 14 different coil geometries was calculated for a typical peripheral nerve stimulation with a 27mm distance between axon and coil. Coil parameters like field strength and focality were determined with electromagnetic field simulations. In a second analysis, the activating function along the axon was calculated, which quantifies the efficiency of neuronal stimulation. Moreover, coil designs were evaluated concerning power efficacy based on ohmic losses. Our results indicate that power efficacy of magnetic neurostimulation can be improved significantly by up to 40% with optimized coil designs.

Paradoxical facilitation alongside interhemispheric inhibition

Neurophysiological experiments using transcranial magnetic stimulation (TMS) have sought to probe the function of the motor division of the corpus callosum. Primary motor cortex sends projections via the corpus callosum with a net inhibitory influence on the homologous region of the opposite hemisphere. Interhemispheric inhibition (IHI) experiments probe this inhibitory pathway. A test stimulus (TS) delivered to the motor cortex in one hemisphere elicits motor evoked potentials (MEPs) in a target muscle, while a conditioning stimulus (CS) applied to the homologous region of the opposite hemisphere modulates the effect of the TS. We predicted that large CS MEPs would be associated with increased IHI since they should be a reliable index of how effectively contralateral motor cortex was stimulated and therefore of the magnitude of interhemispheric inhibition. However, we observed a strong tendency for larger CS MEPs to be associated with reduced interhemispheric inhibition which in the extreme lead to a net effect of facilitation. This surprising effect was large, systematic, and observed in nearly all participants. We outline several hypotheses for mechanisms which may underlie this phenomenon to guide future research.

Real-Time Artifacts Reduction during TMS-EEG Co-Registration: A Comprehensive Review on Technologies and Procedures

Transcranial magnetic stimulation (TMS) excites neurons in the cortex, and neural activity can be simultaneously recorded using electroencephalography (EEG). However, TMS-evoked EEG potentials (TEPs) do not only reflect transcranial neural stimulation as they can be contaminated by artifacts. Over the last two decades, significant developments in EEG amplifiers, TMS-compatible technology, customized hardware and open source software have enabled researchers to develop approaches which can substantially reduce TMS-induced artifacts. In TMS-EEG experiments, various physiological and external occurrences have been identified and attempts have been made to minimize or remove them using online techniques. Despite these advances, technological issues and methodological constraints prevent straightforward recordings of early TEPs components. To the best of our knowledge, there is no review on both TMS-EEG artifacts and EEG technologies in the literature to-date. Our survey aims to provide an overview of research studies in this field over the last 40 years. We review TMS-EEG artifacts, their sources and their waveforms and present the state-of-the-art in EEG technologies and front-end characteristics. We also propose a synchronization toolbox for TMS-EEG laboratories. We then review subject preparation frameworks and online artifacts reduction maneuvers for improving data acquisition and conclude by outlining open challenges and future research directions in the field.