Comparative Evaluation of Clinical Outcomes Using Delta Plates and Conventional Miniplates for Internal Fixation of Mandibular Condylar Fractures in Adults

Treatment of mandibular condyle fractures with a rhombic 3D condylar fracture plate - Does the surgical approach matter?

Fractures involving the mandibular condyle are a significant subset of mandibular fractures, demanding specialized implant design considerations for effective surgical treatment. The core objective of this study was to assess the clinical and radiographic results in patients treated with a single rhombic-shaped implant according to the surgical approach used. This retrospective cohort investigation, spanning a ten-year recruitment window, included individuals with unilateral fractures who underwent surgical treatment with a rhombic-shaped implant. These patients were subject to follow-up examinations at one, three, and six months post-surgery, along with corresponding orthopantomograms and clinical assessments. Patients were allocated into four groups depending on the fracture pattern and level as well as the approach used for fracture treatment. The primary outcome variables under scrutiny encompassed parameters such as occlusion, maximum interincisal distance, mandibular excursion across different postoperative time points, and radiographic measurements of mandibular height and the gonion angle. A total of 236 patients, comprising 161 males and 75 females, with an average age of 40.2 ± 19.2 years, were included in the study. Satisfactory occlusion was exhibited in 99.6% of patients at the six-month follow-up. Furthermore, all parameters associated with mandibular excursion displayed significant enhancements (p < 0.01). These improvements were accompanied by a reduction in ramus height and increased gonion angle on the fractured side. The investigation of the clinical and radiographic results suggest a tendency of the choice of the approach depending on the fracture pattern, but no statistically significant recommendations could be identified.

Two Miniplates Versus Three Dimensional Plate in Management of Mandibular Condylar Fractures: A Systematic Review and Meta-Analysis

Study Design

Systematic Review and Meta-analysis.

Objective

This systematic review and meta-analysis aimed to compare the efficacy of 2 miniplates vs a three-dimensional plate in the management of mandibular condylar fractures. The primary objective was to assess key parameters, including intraoperative time, maximum mouth opening, complications, and functional outcomes, to determine potential differences between the 2 fixation methods.

Methods

A comprehensive literature search was conducted to identify relevant studies. Inclusion criteria were applied, and the selected studies underwent systematic review. The key parameters were extracted and subjected to meta-analysis to quantify and compare the outcomes associated with the use of 2 miniplates and three-dimensional plates. The methodologies of the included studies were critically evaluated to address potential biases and confounding factors.

Results

The meta-analysis results indicated that there were no statistically significant differences between the 2 fixation methods in terms of intraoperative time, maximum mouth opening, complications, and functional outcomes. However, concerns were raised regarding the high risk of bias, confounding factors, and considerable heterogeneity observed across the reviewed studies.

Conclusions

The findings suggest that both 2 miniplates and three-dimensional plates are viable options for the management of mandibular condylar fractures. Despite the lack of statistical significance in the observed differences, the study highlights the need for further prospective research with enhanced methodologies, standardized protocols, larger sample sizes, and reduced bias to refine our understanding and potentially influence clinical management protocols.

Evaluation of the Efficacy of Three Times Titanium Plate Gradual Fixation Method in the Treatment of Extracapsular Condylar Fractures

OBJECTIVE

An improved method of treating inwardly dislocated mandibular extracapsular condylar fracture-three times titanium plate gradual fixation method was introduced, and the clinical efficacy of this method was evaluated.

METHODS

Twenty patients with extracapsular condylar fractures who underwent surgical treatment using the three times titanium plate gradual restoration and fixation method in the Department of Oral Craniomaxillofacial Surgery of the Ninth People's Hospital of Shanghai from November 2020 to June 2023 were selected as the study subjects.

RESULTS

After condylar restoration 22 sides reached healing and 1 side was basically healed; in 3 months after the operation, the degree of opening the mouth and the type of the opening of the mouth reached normal, and 1 case had mildly poor occlusion, which required to be further adjusted through orthodontics, and there was no temporomandibular function disorder or facial nerve function damage.

CONCLUSION

Three times of gradual fixation with a titanium plate can make the condylar process achieve precise and stable repositioning, and make the surgical process orderly, and it is a kind of reliable fixation method for extracapsular condylar fractures.

A single-centre retrospective 10-year experience of the rhombic 3D condylar fracture plate for open reduction and internal fixation of condylar neck and base fractures

Fractures of the mandibular condyle account for a significant proportion of mandibular fractures. The specific functional loads require particular specifications for the implant design used for open reduction and internal fixation of such fractures. The clinical and radiographic outcomes in patients treated using a single rhombic 3D condylar fracture plate for open reduction and internal fixation at a single institution, and who fulfilled the inclusion and exclusion criteria, are presented. The primary outcome variables were: occlusion, maximum interincisal distance and mandibular excursion at 1, 3, and 6 months postoperatively, and radiographic measurements for mandibular height and gonion angle. In total, 263 patients were included, of whom 173 (65.8%) were male and 90 (34.2%) female. The mean age was 40.4 ± 18.9 years. There was satisfactory occlusion in 98.9% of patients at the 6-month follow-up, and a significant improvement in all parameters for mandibular excursion (p < 0.001), with a reduced ramus height and an increase in the gonion angle on the fractured side. Excellent clinical and radiographic results were achieved using the rhombic-shaped implant, deeming it appropriate for the osteosynthesis of mandibular condyle fractures.

Which Factors Affect the Reduction Quality of Open Reduction Internal Fixation of Mandibular Subcondylar Fractures?

BACKGROUND

Open reduction internal fixation (ORIF) of mandibular subcondylar fractures (MSF) involves several variables that could affect decision making. There is insufficient data regarding factors influencing the outcomes of MSF ORIF.

PURPOSE

The purpose of this study was to investigate factors associated with quality of bony reduction of MSF and occlusion, after ORIF.

STUDY DESIGN, SETTING, AND SAMPLE

We designed a retrospective cohort study of consecutively treated subjects for MSF ORIF, ages 18 to 64 years, by University of Illinois' Department of Oral and Maxillofacial Surgery, between January 1, 2013, and January 26, 2021.

PREDICTOR VARIABLE

The primary predictor variable was the vertical level of MSF from the gonial angle. Secondary predictor variables included surgeon, fixation scheme (number and configuration of miniplate), surgical approach, time to surgery, mechanism of injury, vertical fragment overlap, overlying soft tissue thickness, presence of other mandibular fractures, and severity and direction of displacement.

MAIN OUTCOME VARIABLES

The primary outcome variable was the mean radiographic reduction score (RRS), rated by 2 blinded observers on a 1 to 5 scale. The secondary outcome variable was presence of postoperative malocclusion as documented in the medical records.

COVARIATES

Covariates were age and sex.

ANALYSES

Descriptive statistics were computed. To investigate the influence of the predictor variables on reduction quality, multifactorial analysis of variance with post hoc Tukey test was performed. For malocclusion, χ2 test was performed. The level of significance was set at P < .05.

RESULTS

Thirty-eight MSF in 37 subjects were included. Mean age was 32.7 years (range 18 to 64), and 83.8% were male. Mean RRS was 4.38 (standard deviation 0.77). Fixation scheme was the only variable that showed significant impact on RRS: single-straight miniplate had lower scores than double-straight (-1.50, P = .011), rhomboid (-1.29, P = .036), and ladder miniplates (-1.38, P = .048). There was 1 incidence of malocclusion (2.7%) which resolved without intervention.

CONCLUSIONS AND RELEVANCE

Favorable reduction (anatomic reduction to mild discrepancies) can be achieved without malocclusion using double-straight, or rhomboid-shaped or ladder-shaped miniplates, without influences from patient or injury-related factors. In contrast, single-straight miniplate fixation resulted in moderate discrepancies in reduction, although it did not lead to malocclusion.

Treatment for Adult Mandibular Condylar Process Fractures: A Network Meta-Analysis of Randomized Clinical Trials

PURPOSE

Using network meta-analyses (NMA) has become increasingly valuable as it enables the comparison of interventions that have not been directly compared in a clinical trial. To date, there has not been a NMA of randomized clinical trials (RCT) that compares all types of treatments for mandibular condylar process fractures (MCPFs). The aim of this NMA was to compare and rank all the available methods used in the treatment of MCPFs.

METHODS

Following Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, a systematic search was conducted in 3 major databases up to January 2023 to retrieve RCTs that compared various closed and open treatment methods for MCPFs. The predictor variable is treatment techniques: arch bars (ABs) + wire maxillomandibular fixation (MMF), rigid MMF with intermaxillary fixation screws, AB + functional therapy with elastic guidance (AB functional treatment), AB rigid MMF/functional treatment, single miniplate, double miniplate, lambda miniplate, rhomboid plate, and trapezoidal miniplate. Postoperative complications were the outcome variables and included occlusion, mobility, and pain, among other things. Risk ratio (RR) and standardized mean difference were calculated. Version 2 of the Cochrane risk-of-bias tool and Grading of Recommendations, Assessment, Development, and Evaluations system were used to determine the certainty of the results.

RESULTS

The NMA included a total of 10,259 patients from 29 RCTs. At ≤6 months, the NMA revealed that the use of 2-miniplates significantly reduced malocclusion compared to rigid MMF (RR = 2.93; confidence interval [CI]: 1.79 to 4.81; very low quality) and functional treatment (RR = 2.36; CI: 1.07 to 5.23; low quality).Further, at ≥6 months, 2-miniplates resulted in significantly lower malocclusion compared to rigid MMF with functional treatment (RR = 3.67; CI: 1.93 to 6.99; very low quality).Trapezoidal plate and AB functional treatment were ranked as the best options in 3-dimensional (3D) plates and closed groups, respectively.3D-miniplates (very low-quality evidence) were ranked as the most effective treatment for reducing postoperative malocclusion and improving mandibular functions after MCPFs, followed closely by double miniplates (moderate quality evidence).

CONCLUSIONS

This NMA found no substantial difference in functional outcomes between using 2-miniplates versus 3D-miniplates to treat MCPFs (low evidence).However, 2-miniplates led to better outcomes than closed treatment (moderate evidence).Additionally, 3D-miniplates produced better outcomes for lateral excursions, protrusive movements, and occlusion than closed treatment at ≤6 months (very low evidence).

Which of 51 Plate Designs Can Most Stably Fixate the Fragments in a Fracture of the Mandibular Condyle Base?

In the surgical treatment of the most common fracture of the mandible, which is a fracture of the condylar base, a great choice of different plate shapes is observed. The aim of this study was to determine which shape gives the greatest fixation stiffness. To ensure homogeneity in comparison, tests were performed on polyurethane models divided at the level of the condylar base fracture and each were fixed with 51 plates. The plates were cut from a 1 mm thick grade 23 titanium sheet. The models were then loaded and the force required for 1 mm of fracture displacement was recorded. It was noted that in addition to osteosynthesis from two simple plates, there were also two dedicated single plates with similar rigidity. Among the large number of described designs of plates, there is considerable variation in terms of the stability of the fixation performed with them. The proposed Mechanical Excellence Factor allows a pre-evaluation of the expected rigidity of fixation with a given plate shape without the need for a loading experiment. The authors expect this to be helpful for surgeons in the application of relevant plates, as well for inventors of new plates for the osteosynthesis of basal fractures in mandibular condyle.

Reliability of a Trapezium Miniplate with Endoscope-Assisted Internal Fixation in Mandibular Subcondylar Fractures: A Three-Dimensional Analysis

This study aimed to evaluate the reliability of a trapezium plate for open reduction and internal fixation (ORIF) of mandibular subcondylar fractures with the simultaneous use of an endoscope. We selected and retrospectively studied 18 patients (12 males and 6 females) with unilateral mandibular subcondylar fractures who visited the Wonju Severance Christian Hospital. The mean age of the patients was 43.43 ± 15.76 years. Patients underwent ORIF with trapezium miniplate application through an intraoral incision under general anesthesia. The clinical and radiographic findings of the fractured side were compared with those of the non-operated side at 6 months follow-up. All occlusions became stable, and transient functional disturbances disappeared within 6 months of periodic follow-up. Functional mandibular movement recovered within the normal range, with an average mouth opening of 41.5 mm, protrusion of 7.5 mm, and lateral excursion of 7 mm at 6 months. Radiographic controls and statistical analysis confirmed a decent anatomical reduction in all 18 cases. In conclusion, the use of a trapezium miniplate with endoscope-assisted ORIF in mandibular subcondylar fractures can be useful for fixation and functional recovery.

The Use of Titanium 3D Mini-Plates in the Surgical Treatment of Fractures of the Mandibular Condyle: A Systematic Review and Meta-Analysis of Clinical Trials

Introduction: Fixing fractures of the base and neck of mandibular condyles is demanding due to the difficulties in surgical access and the various shapes of bone fragments. Classic fixation techniques assume the use of straight mini-plates, utilized for other craniofacial bone fractures. Three dimensional mini-plates may provide a reasonable alternative due to their ease of use and steadily improved mechanical properties. The multitude of different shapes of 3D mini-plates proves the need for their evaluation. Aim: This paper aims to summarize the clinical trials regarding the use of various types of 3D condylar mini-plates in terms of need for reoperation and the incidence of loosening and damage to the osteosynthetic material. Materials and Methods: A systematic review was conducted in accordance with PICOS criteria and PRISMA protocol. The risk of bias was assessed using ROBINS-I and RoB 2 Cochrane protocols. The obtained data series was analyzed for correlations (Pearson’s r) respecting statistical significance (Student’s t-test p > 0.05) and visualized using OriginLab. Results: 13 clinical trials with low overall risk of bias regarding 6 shapes of 3D mini-plates were included in the synthesis. The number of reoperations correlates with the number of fixations (r = 0.53; p = 0.015) and the total number of screw holes in the mini-plate (r = −0.45; p = 0.006). There is a strong correlation between the number of loosened osteosynthetic screws and the total number of fractures treated with 3D mini-plates (r = 0.79; p = 0.001 for each study and r = 0.99; p = 0.015 for each mini-plate shape). A correlation between the percentage of lost screws and the number of distal screw holes is weak regarding individual studies (r = −0.27; p = 0.000) and strong regarding individual mini-plate shape (r = −0.82; p = 0.001). Three cases of 3D mini-plate fractures are noted, which account for 0.7% of all analyzed fixation cases. Discussion: The reasons for reoperations indicated by the authors of the analyzed articles were: mispositioning of the bone fragments, lack of bone fragment union, secondary dislocation, and hematoma. The known screw loosening factors were poor bone quality, bilateral condylar fractures, difficulties in the correct positioning of the osteosynthetic material due to the limitations of the surgical approach, fracture line pattern, including the presence of intermediate fragments, and mechanical overload. Fractures of the straight mini-plates fixing the mandibular condyles amounts for up to 16% of cases in the reference articles. Conclusions: There is no convincing data that the number of reoperations depends on the type of 3D mini-plate used. The frequency of osteosynthetic screw loosening does not seem to depend on the 3D mini-plate’s shape. Clinical fractures of 3D mini-plates are extremely rare.

Outcomes of the Nonendoscopic Transoral Approach to Subcondylar Mandible Fractures

PURPOSE

The transoral approach (TRA) to subcondylar fractures without any endoscopic or transbuccal assistance is not a common technique. The purpose of this study was to measure and compare the quality of open reduction and internal fixation (ORIF) between the TRA and the retromandibular approach (RMB), including types and frequencies of postoperative complications.

METHODS

In our retrospective cohort study, we enrolled a sample of patients with displaced subcondylar mandible fractures treated by ORIF. The predictor was the approach mode: TRA or RMB. In postoperative computed tomography (CT) data sets, we measured the angles of the condylar process in relation to references: 1) midline, 2) lateral ramus border, and 3) posterior ramus border. The primary outcome variable was the reduction outcome, which was calculated as the difference between the total of all angles of the operated side and the non-affected side. Secondary outcomes were postoperative complications extracted from patients' files. Other variables were age, gender, number of plates, operation time and a modified AO trauma score. In bivariate analysis, we compared the outcome between both groups.

RESULTS

Sixty-four patients were included in total, with TRA performed in 50%. Patients with TRA were younger (31 vs 41, P = .003), and the trauma score was lower (1.9 vs 3.3, P < .001). Reduction outcome remained comparable between both techniques (mean 3.7° for both, P = .92). Complication rates were similar, although facial nerve palsy was absent for TRA (0 vs 4, P = .039).

CONCLUSION

We suggest TRA for selected patients with displaced, single fragmented subcondylar fractures. Reduction outcome shows a comparable exactness to RMB, while TRA is safer for the facial nerve.

Two miniplates versus 3-dimensional plate in the management of mandibular subcondylar fractures: a retrospective analysis

PURPOSE

The aim of the present study was to evaluate the outcomes in patients with subcondylar fracture of mandible treated with 2 single miniplates compared to a 3-dimensional (3D) plate.

PATIENTS AND METHODS

This is a retrospective study which included patients diagnosed and treated for mandibular subcondylar fracture from January 2015 to December 2019. Included patients were divided into two groups, group 1: 2 miniplate group and group 2: 3D plate group. The data was obtained from the patients' records and evaluated for various outcomes including occlusal stability, postoperative complications like plate fracture, non-union, plate or screw loosening, and plate or screw infection leading to implant removal, wound dehiscence, salivary fistula, and facial nerve paralysis. The statistical analysis was performed using chi square test and Student's t test.

RESULTS

A total 58 patients (43 males and 15 females) were enrolled in the two groups ranging from 21 to 59 years. A total of 35 patients were recruited in group 1, whereas 23 patients were recruited in group 2. There was no statistically significant difference in the two groups with regard to the age range, gender, diagnosis, side of fracture, and accompanying fractures. Occlusal instability, wound dehiscence, and facial nerve paralysis was found in both the groups. Group 1 had 1 patient which required implant removal due to screw loosing, whereas group 2 had 2 patients which required plate removal due to plate fracture. One patient in group 2 required second surgery for fixation of fracture due to non-union. One patient in group 1 developed a sialocele postoperatively. However, there was no statistically significant difference in any of the variables assessed among the two groups (p > 0.05).

CONCLUSION

The results of our study indicate that the 2 miniplates and 3D plate system are effective in the management of mandibular subcondylar fractures.

Does Three-Dimensional Plate Offer Better Outcome and Reduce the Surgical Time Following Open Reduction and Internal Fixation of Adult Mandibular Unilateral Subcondylar Fractures. A Randomized Clinical Study

PURPOSE

The management of the condyle fractures continue to be a source of perineal controversy in the field of oral and maxillofacial trauma. The aim of this study was to compare the surgical feasibility, functional outcome, and stability of fixation between the conventional miniplate and 3-dimensional plate in the management of adult mandibular unilateral subcondylar fractures.

MATERIALS AND METHODS

A prospective randomized clinical study with well-structured inclusion and exclusion criteria was carried out. Patients were allocated into Group A (Miniplates) and Group B (3-D Plates). The primary outcome variables were time taken for fixation, maximum mouth opening, occlusal stability, increase in angulation, and increase in the gap between fractured segments in the radiograph. The secondary outcome variables were needed for intermaxillary fixation (IMF) with guiding elastics and jaw movements. Statistical analysis was done using χ² test and student's t test with P value less than 0.05 indicating statistical significance.

RESULTS

Forty-four patients (40 male and 4 female) were enrolled, with 22 patients in each group. Time taken for fixation using 3-D plates was significantly lower than conventional miniplates (9.6 ± 0.9 minutes with P value 0.001). Although clinical parameters showed improved results for Group B, there was no statistical significance. Radiological parameters ie increase in angulation, and increase in the gap, showed statistically significant results. Group A had significant increases in the angulation of the fractured condyle at the end of the third and sixth months with a P value of 0.008 and 0.0001, respectively. The gap between the fractured segments was significantly increased in Group A at the end of the first and third months, with a P value of 0.022 and 0.003, respectively.

CONCLUSIONS

Our results concluded that 3-D plate offers superior fracture fragment stability and less displacement of the fractured segments. It has an added advantage of the ease of adaptation and shorter operating time.

Algorithm for Management of Mandibular Condylar Base Fractures

Supplemental Digital Content is available in the text.

Background:

Increasing evidence suggests that open reduction and internal fixation of condylar base fractures in adults results in improved outcomes in regard to interincisal opening, jaw movement, pain, and malocclusion. However, most of the condylar fractures are managed by maxillomandibular fixation alone due to the need for specialized training and equipment. Our aim was to present an algorithm for condylar base fractures to simplify surgical management.

Methods:

A retrospective review was performed of patients (n = 22) with condylar base fractures treated from 2016 to 2020. Patients who presented with operative fractures that require open treatment underwent 1 of 2 different techniques depending on the fracture type: a preauricular approach with a transoral approach if the condyle was dislocated (n = 2) or a transoral only approach (n = 20) in nondislocated cases. Operative time, occlusion, range of motion, and postoperative complications were assessed.

Results:

Condylar base fractures were combined with other mandibular fractures in 16 of 22 patients. Patients with condylar dislocation were managed with a preauricular approach with a secondary transoral incision (n = 2, median 147 minutes). Those without dislocation were treated with a transoral approach (n = 20, median 159 minutes). Most patients were restored to their preoperative occlusion without long-term complications.

Conclusions:

We present a simplified algorithm for treating condylar base fractures. Our case series suggests that reduction in operative time and clinical success can be achieved with open reduction and internal fixation using a transoral approach alone or in combination with a preauricular approach for dislocated fractures.

The Use of 3D Titanium Miniplates in Surgical Treatment of Patients with Condylar Fractures

The aim of this study was to evaluate the effectiveness of open treatment of mandibular condyle fractures using 3D miniplates. A group of 113 patients has been chosen for evaluation, including 100 men and 13 women. After hospitalization, each patient underwent a 6-month postoperative follow-up. The material chosen for the analysis consisted of data collected during the patient’s stay in the hospital as well as the postoperative outpatient care. A single 4-hole Delta Condyle Compression Plate (4-DCCP) was used in 90 out of 113 (79.6%) cases. In 16 out of 113 (14.2%) patients, the Trapezoid Condyle Plate (4-TCP or 9-TCP) was used. The remaining cases required more than one miniplate. No 3D miniplate fractures were found in the study subjects during the analyzed observation period. Loosening of one or more osteosynthesis screws was observed in 4 out of 113 (3.5%) patients. Screw loosening was a complication that did not affect bone healing in any of the patient cases. The conducted research confirms that titanium 3D mini-plates are easy to adjust and take up little space, therefore they can easily be used in cases of mandibular condyle base and lower condyle neck fractures. The stability of the three-dimensional miniplates for osteosynthesis gives very good reliability for the rigid fixation of the fractured mandibular condyle.

Which fixation methods are better between three-dimensional anatomical plate and two miniplates for the mandibular subcondylar fracture open treatment?

PURPOSE

To compare the clinical outcomes of a single three-dimensional (3-D) anatomical plate versus two conventional straight miniplates for the open treatment of mandibular subcondylar fractures.

METHODS

This retrospective clinical study included patients with mandibular subcondylar fractures treated by the retromandibular transparotid approach using a 3-D plate or two straight miniplates. Outcome variables included preoperative conditions of patients and fractures, extent of postoperative bone healing, and incidence of complications. Other variables included age, sex, fracture site, and follow-up duration. Variables were evaluated using descriptive statistics and compared between groups.

RESULTS

Twenty-eight fractures were analyzed: 13 fractures using 3-D plate and 15 fractures using two straight miniplates. None of the assessed variables showed significant differences between the two groups (p < 0.05). Unfortunately, in the 3-D plate group, reoperation was necessary for nonunion owing to plate breakage in one case with a bone defect around the fracture.

CONCLUSION

The 3-D plate and two straight miniplates were equally effective for the surgical management of mandibular subcondylar fractures. Although a 3-D plate is sufficient for a typical simple fracture, in cases with a bone defect around the fracture, selection of the plate fixation method should be carefully considered.