Biomass impregnated zero-valent Ag and Cu supported-catalyst: Evaluation in the reduction of nitrophenol and discoloration of dyes in aqueous medium

Green Synthesis: An Eco-Friendly Approach for the Synthesis of Silver Nanoparticles Functionalized with Operculina turpethum and It's In vitro and in vivo Biological Activities

Introduction

Silver nanoparticles (AgNPs) have gained significant attention in biomedical applications. Green synthesis methods provide an eco-friendly and cost-effective approach to AgNPs production, utilizing plant extracts as reducing and stabilizing agents. In this study, AgNPs were synthesized using the methanolic extract of Operculina turpethum.

Methodology

AgNPs were synthesized using O. turpethum extract, and their formation was confirmed through various analytical techniques. The antibacterial activity of both the crude extract and AgNPs was assessed against Staphylococcus aureus. Enzyme inhibition studies were conducted for urease, α-glucosidase, carbonic anhydrase II, and xanthine oxidase. Analgesic and sedative activities were evaluated through standard models.

Results

AgNPs exhibited an inhibition zone of 14 mm against S. aureus, greater than the crude extract (12 mm) but lower than Linezolid (25 mm). Enzyme inhibition studies revealed strong activity, particularly against urease (96.09% inhibition, IC5o = 25.65 ± 0.97 µg/mL). AgNPs demonstrated superior analgesic effects (81.98% at 10 mg/kg), comparable to diclofenac sodium (86.02%). Sedative effects were dose-dependent, reaching 35.09% at 10 mg/kg.

Discussion

The enhanced antibacterial activity of AgNPs suggests improved bioavailability and interaction with bacterial membranes. The strong enzyme inhibitory potential indicates their possible therapeutic role in enzyme-related disorders. The analgesic and sedative activity of AgNPs suggests their possible role in pain management agents and neuropharmacology. The results demonstrate the efficacy of green-synthesized AgNPs for biomedical applications.

Conclusion

Green synthesized AgNPs and their antibacterial, enzyme inhibitory, analgesic, and sedative properties suggest promising therapeutic applications. Further research should explore their mechanisms and in vivo safety for clinical applications.

A potential eco-friendly degradation of methyl orange by water-ball (sodium polyacrylate) stabilized zero valent iron nanoparticles

This study presents the synthesis and application of water-ball (sodium polyacrylate) stabilized zero-valent iron nanoparticles (wb@Fe0) for the eco-friendly degradation of Methyl Orange (MO). The nanoparticles were prepared using a chemical reduction method using NaBH4. Characterization techniques including Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-ray Spectroscopy (EDS), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS), and X-ray Diffraction (XRD) were employed to analyze the morphology, elemental composition, valent state and crystallinity of the nanoparticles. The catalytic performance was evaluated under standard conditions, with a maximum degradation efficiency of 94 % achieved for a 0.05 mM MO solution using 10 mg of the catalyst, 0.1 mM NaBH4, at neutral pH and room temperature within 10 min. Optimal degradation occurred at 40 °C and pH 6. The catalyst demonstrated excellent recyclability, maintaining activity over ten reuse cycles. Kinetic studies revealed that the degradation followed first-order kinetics with an R2 value of 0.8907 and a rate constant of 0.3708. Though with a lower R2 value (0.6884), the second-order kinetics model indicated the highest rate constant of 2.6522. Regression and ANOVA analysis confirmed the accuracy of the reaction protocol. This study highlights the potential of water-ball stabilized zero-valent iron nanoparticles for effective dye pollutant removal and degradation, offering a promising approach for environmental remediation.

Catalytic activity of Cu2O nanoparticles supported on cellulose beads prepared by emulsion-gelation using cellulose/LiBr solution and vegetable oil

Nanocatalysts tend to aggregate and are difficult to recycle, limiting their practical applications. In this study, an environmentally friendly method was developed to produce cellulose beads for use as supporting materials for Cu-based nanocatalysts. Cellulose beads were synthesized from a water-in-oil emulsion using cellulose dissolved in an LiBr solution as the water phase and vegetable oil as the oil phase. Upon cooling, the gelation of the cellulose solution produced spherical cellulose beads, which were then oxidized to introduce surface carboxyl groups. These beads (diameter: 95-105 μm; specific surface area: 165-225 m2 g-1) have a three-dimensional network of nanofibers (width: 20-30 nm). Furthermore, the Cu2O nanoparticles were loaded onto oxidized cellulose beads before testing their catalytic activity in the reduction of 4-nitrophenol using NaBH4. The apparent reaction rate constant increased with increasing loading of Cu2O nanoparticles and the conversion efficiency was >90 %. The turnover frequency was 376.2 h-1 for the oxidized cellulose beads with the lowest Cu2O loading, indicating a higher catalytic activity compared to those of other Cu-based nanoparticle-loaded materials. In addition to their high catalytic activity, the cellulose beads are reusable and exhibit excellent stability.

Zinc nanoparticles encapsulated in porous biopolymer beads for reduction of water pollutants and antimicrobial activity

This work focuses on the preparation of composite beads from alginate crosslinked with copper at several loading percent and also loaded with ZnNPs. Th obtained samples were applied as catalysts for the reduction of the organic polluants 4-NP, MB, OG, MO, and CR in simple and binary systems. XRD results and TEM images confirmed the presence of ZnNPs in the polymer matrix. XRF and TGA analysis showed that the percentage of the cross-linking agent significantly influences the content of ZnNPs as well as the thermal stability of the resulting material. The catalytic activity of the composite beads showed that the Cu(4 %)-ALG(ZnNPs) sample was the best catalyst for all pollutants. In the simple system, the recorded rate constants for MB, MO, 4-NP, OG, and CR were 0.0133 s-1, 0.0076 s-1, 0.005 s-1, 0.0042 s-1, 0.0036 s-1, respectively. The catalyst was more selective towards the cationic MB dye for binary systems. For antibacterial and antifungal applications, the different materials containing ZnNPs and their counterparts containing Zn2+ were found to be active across all bacterial strains (Gram positive and Gram negative) as well as fungi, and the Zn2+-containing composites in particular performed better across all bacteria and fungi.

Catalytic reduction of organic pollutants, antibacterial and antifungal activities of AgNPs@CuO nanoparticles-loaded mesoporous silica

In this work, the mesoporous silica MCM-41 was prepared by a hydrothermal method and then modified using silver and copper. The obtained samples were used as antibacterial/antifungal agents and as catalysts for the reduction of the following dyes: Methylene Blue (MB), Congo Red (CR), Methyl Orange (MO), and Orange G (OG). Several parameters affecting the reduction of dyes were investigated and discussed such as the catalyst nature, the initial concentration of the dye, the dye nature, the selectivity of the catalyst in a binary system as well as the catalyst reuse. The catalysts were characterized using XRD, nitrogen sorption measurements, XRF, FTIR, XPS, SEM/EDS, and TEM. XRD, XPS, and TEM analysis clearly showed that the calcination of copper- and silver-modified silica leads to the formation of well-dispersed CuO and AgNPs having sizes between 5 and 10 nm. As determined by XRF analysis, the content of silver nanoparticles was higher compared to CuO in all samples. It has been shown that the dye reduction is influenced by the size and the content of nanoparticles as well as by their dispersions. The catalytic activity was shown to be the highest for the Ag-Cu-MCM(0.05) catalyst with a rate constant of 0.114, 0.102, 0.093, and 0.056 s^-1 for MO, MB, CR, and OG dyes in the single-dye system, respectively. In the binary system containing MB/OG or MB/MO, the catalyst Ag-Cu-MCM(0.05) was more selective toward the MB dye. The reuse of the catalyst for three consecutive cycles showed higher MB conversion in a single system with an increase in reaction time. For antifungal and antibacterial properties, the application of calcined and uncalcined materials toward six different strains showed good results, but uncalcined materials showed the best results due to the synergistic effect between CuO and unreduced species Ag⁺ which are considered responsible for the antibacterial and antifungal action.

Catalytic Reduction of Dyes and Antibacterial Activity of AgNPs@Zn@Alginate Composite Aerogel Beads

This work focuses on the preparation of aerogel composite beads based on Zn(II)-crosslinked alginate and loaded with different percentages of AgNPs using a simple approach. The obtained samples were evaluated in two different applications: the first application consists in their use as catalysts for the reduction of MB, MO, OG and CR dyes in a simple and binary system under the presence of NaBH₄. For this, several parameters affecting the catalytic behavior of these catalysts have been investigated and discussed such as the catalyst mass, AgNPs content, dye nature, and the selectivity of the catalyst in a binary system. The second application concerns their antibacterial activities towards two Gram-negative bacteria Escherichia coli (ATCC 25922), and Pseudomonas aeruginosa (ATCC 27853), and a Gram-positive bacteria Staphylococcus aureus (ATCC 25923). The physico-chemical properties of different samples were characterized by XRD, FTIR, SEM/EDS, and TGA analysis. The obtained results confirmed the presence of AgNPs on a highly porous alginate structure. The dispersion of a high percentage of AgNPs leads to the formation of nanoparticles on the outer surface of the alginate which led to their leaching after the catalytic test, while the composite having a low percentage of AgNPs showed good results through all dyes without leaching of AgNPs. For the antibacterial application of the different samples, it was shown that a composite with a higher percentage of AgNPs was the most effective against all bacteria.

A Cu(ii) complex supported on Fe3O4@SiO2 as a magnetic heterogeneous catalyst for the reduction of environmental pollutants

Today, the presence of pollutants in the environment has become one of the serious problems and concerns of human beings. To eliminate these pollutants, researchers have made many efforts. One of the most important of these efforts is the reduction of such contaminants in the presence of effective catalysts. Two of the most important and widespread types of these pollutants are nitro compounds and organic dyes. In this paper, we report the synthesis of an efficient and reusable magnetic catalyst using Fe3O4@SiO2 core-shell nanoparticles (NPs), N-(4-bromophenyl)-N'-benzoylthiourea, and copper(ii). Specifically, the Cu(ii)-N-(4-bromophenyl)-N'-benzoylthiourea complex supported on Fe3O4-core magnetic NPs (CM)/SiO2-shell (SS) (CM@SS-BBTU-Cu(ii)) has been prepared. CM@SS-BBTU-Cu(ii) was characterized by FT-IR (Fourier transform infrared spectroscopy), XRD (X-ray diffraction), TEM (transmission electron microscopy), HRTEM (high resolution transmission electron microscopy), FFT (fast Fourier transform), VSM (vibrating sample magnetometry), TG-DTA (thermogravimetry-differential thermal analysis), STEM (scanning transmission electron microscopy), EDS (energy-dispersive X-ray spectroscopy), and elemental mapping. The synthesized CM@SS-BBTU-Cu(ii) was applied for the reduction of 4-nitrophenol (4-NP), Congo red (CR), and methylene blue (MB) in the presence of NaBH4 (sodium borohydride) at room temperature. CM@SS-BBTU-Cu(ii) can be recycled and reused 5 times. Our results displayed that the performance of the catalyst was not significantly reduced by recycling.

Sequestration of Anionic and Cationic Dyes through Thermally Activated Slate and Their Kinetics and Thermodynamic Characteristics

Adsorption is one of the most common and most robust techniques for the decontamination approach of effluents, owing to its design flexibility, simplicity, cost effectiveness, and high efficiency. However, its application is limited on a large scale due to its cost. The current study investigates the use of low-cost, ecofriendly, and ubiquitous thermally activated clay material. Thermally treated clay was used for the adsorption of crystal violet (CV), Congo red (CR), and malachite green (MG) organic dyes from aqueous solutions. Characterization of slate was carried out with Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy, X-ray diffraction, N₂ physisorption, and XRF spectrometry. The adsorption process was studied as a function of concentration, time, pH, and temperature. Using the batch adsorption technique, the experimentally obtained adsorption data were fitted to both Langmuir and Freundlich isotherms. The adsorption data followed the pseudo-second-order kinetics, and the adsorption capacity was recorded as 360.12 mg/g for CV, 409.23 mg/g for CR, and 390.14 mg/g for MG. The good uptake is the outcome of a greater surface area (24.751 m²/g) for the slate activated at 873 K. The thermodynamic studies showed that the adsorption process remained endothermic and spontaneous. Thermally activated slate proved itself to be an efficient adsorbent and can effectively be used for the removal of textile dyes from the contaminated water, and it is evident from the good uptake of the adsorbate by the adsorbent.

Catalytic behavior and antibacterial/antifungal activities of new MNPs/zeolite@alginate composite beads

In this paper, a new family of composite materials was prepared based on calcium alginate and metal nanoparticle-loaded zeolite omega. Different types of metal nanoparticles (MNPs), namely Cu, Co and Fe, were loaded onto zeolite omega to test the performance of the resulting metal/zeolite@alginate composites towards the catalytic reduction of methylene blue dye. To examine their application field as broadly as possible, these composite beads were also tested as antibacterial and antifungal agents against several types of bacteria. Several techniques such as XRD, XRF, FTIR, XPS, SEM and TGA were used to characterize the samples. The obtained results showed that all the composite bead samples were effective in the reduction of MB dye. The composite Co/Zeolite@ALG with relatively low Co nanoparticle (NP) content was selected as the best performing catalyst due to its reduction of MB dye being completely achieved in 3 min with a rate constant of 1.4 min-1, which was attributed to its highly porous structure. The reuse tests conducted on the best-performing catalyst showed good results which persisted through five successive cycles. For antibacterial and antifungal activities, the Cu/Zeolite@ALG and Fe/Zeolite@ALG composites showed good activity with significant inhibition zones.