Determination of the total drug-related chlorine and bromine contents in human blood plasma using high performance liquid chromatography–tandem ICP-mass spectrometry (HPLC–ICP-MS/MS)

Multielement Detection of Nonmetals by Barium-Based Post-ICP Chemical Ionization Coupled to Orbitrap-MS

Prevalence of F, Cl, S, P, Br, and I in pharmaceuticals and environmental contaminants has promoted standard-free quantitation using analyte-independent heteroatom responses in inductively coupled plasma (ICP)-MS. However, in-plasma ionization challenges and element-dependent isobaric interference removal methods have hampered the multielement nonmetal detection in ICP-MS. Here, we examine an alternative approach to enhance multielement detection capabilities. Analytes are introduced into an ICP leading to post-plasma formation of HF, HCl, H3PO3, H2SO4, HBr, and HI, which are then chemically ionized to BaF+, BaCl+, BaH2PO3+, BaHSO4+, BaBr+, and BaI+ via reactions with barium-containing ions supplied by a nanospray. Subsequent ion detection by high-resolution MS provides an element-independent approach for resolving isobaric interferences. We show that elemental response factors using these ions are linear within 2 orders of magnitude and independent of analytes' chemical structures. Using a single set of operating parameters, detection limits <1 ng/mL are obtained for Cl, Br, I, and P, while those for F and S are 1.8 and 6.2 ng/mL, respectively, offering improved multielement quantitation of nonmetals. Further, insights into ionization mechanisms indicate that the reactivities of reagent ions follow the order BaNO2+ > BaHCO2+ > Ba(H2O)n2+ ∼ BaCH3CO2+. Notably, the least reactive ions are generated directly by nanospray, suggesting that modification of these ions via interaction with plasma afterglow is critical for achieving good sensitivities. Moreover, our experiments indicate that the element-specific plasma products follow the order HF < H2SO4 ∼ HCl < H3PO3 ∼ HBr ∼ HI for their propensity to react with reagent ions. These insights provide guidelines to manage matrix effects and offer pathways to further improve the technique.

High-Resolution Elemental Mass Spectrometry Using LC-ICP-Nanospray-Orbitrap for Simultaneous and Species-Independent Quantitation of Fluorinated and Chlorinated Compounds

Simultaneous elemental detection of F and Cl offers quantitation of fluorinated and chlorinated compounds and their transformation products without compound-specific standards. Despite wide-ranging applications, this capability has been hindered by fundamental and technical shortcomings of current inductively coupled plasma (ICP)-MS methods in ion formation and isobaric interference elimination. These hurdles are alleviated here via a chemical ionization method. Fluorine and chlorine in analytes are first converted to HF and HCl by an ICP with post-plasma recombination and subsequently react with barium-containing ions supplied by a nanospray, yielding BaF+ and BaCl+ as elemental reporter ions. Notably, the method is readily interfaced to an Orbitrap MS which eliminates isobaric interferences at resolving powers as low as 35,000, far greater than that of current ICP-MS instruments. Moreover, the instrument is easily reverted to the ESI-MS mode for complementary molecular characterization. To demonstrate analytical capabilities, a workflow for rapid quantitation of compounds separated by reversed-phase liquid chromatography is developed using a species-independent calibration. The independent F and Cl measurements agree with each other, providing recoveries of >90% and LODs of 8-12 pmol Cl and 5-12 pmol F on the column. The workflow along with LC-ESI-MS on the same instrument is then applied to identify and quantify in-vitro drug metabolites, yielding total drug-related material recoveries of >80% and quantitation of minor metabolites summing to 8% of the total drug-related compounds. These results highlight the strengths of simultaneous F and Cl speciation for rapid quantitation with applications in early drug development.

Compatibility of Niuhuang Jiedu Tablets Results in Attenuated Arsenic Bioaccumulation and Consequent Protection against Realgar-Induced Toxicity in Mice

Niuhuang Jiedu Tablets (NJT) is a popular over-the-counter traditional Chinese medicine (TCM) preparation. It is composed of realgar (As₂S₂) and seven other TCMs. The safety of NJT is of growing concern because arsenic (As) is carcinogenic to humans. The toxicity of realgar in vivo can mainly be attributed to the absorbed and accumulated As. This study investigated the correlation between the detoxification effects of the other TCMs in NJT on realgar and their influences on arsenic accumulation of realgar in mice. Histopathological examination, clinical biochemical test, and metabolic profiling analysis were used to evaluate the toxicity of realgar. The concentration of arsenic in mice whole blood as the hazard indicator was determined by inductively coupled plasma mass spectrometry (ICP-MS). The compatibility of NJT could decrease arsenic bioaccumulation of realgar in mice whole blood and consequently reduce the toxicity of realgar, which could be considered as one detoxification mechanism to realgar in NJT. The combination of Rhei Radix et Rhizoma, Scutellariae Radix, Platycodonis Radix, and Glycyrrhizae Radix et Rhizoma exhibited almost the same effects as NJT in regulating the serum biochemical parameters and metabolic profiles disturbed by realgar and in reducing arsenic accumulation of realgar in mice whole blood.

Determination of the Non-metallic Elements in Herbal Tea by Inductively Coupled Plasma Tandem Mass Spectrometry

The feasibility of using inductively coupled plasma tandem mass spectrometry (ICP-MS/MS) to overcome spectral overlaps in the determination of non-metallic elements was investigated. The contents of Si, P, S, Cl, Br, and I in herbal tea were determined by using ICP-MS/MS after microwave digestion. In the MS/MS mode, O₂ and H₂ were consecutively used as reaction gases. Low background equivalent concentration (BEC) and limit of detection (LOD) of analytes were obtained when using O₂ mass shift, H₂ mass shift, and H₂ on-mass methods. The LODs for Si, P, S, Cl, Br, and I were 0.41, 0.048, 0.34, 0.76, 0.055, and 0.007 μg L^-1, respectively. Standard reference materials NIST SRM 1515 (apple leaves) and NIST SRM 1547 (peach leaves) were used to evaluate the accuracy of the analytical method. The developed method was used to analyze 20 herbal teas. The ranges of values for Si, P, S, Cl, Br, and I in herbal tea were 236-4100, 1830-4360, 1290-3850, 335-4620, 0.86-8.21, and 0.091-0.65 μg g^-1, respectively. The results showed that several non-metallic elements essential for the human body might be obtained by drinking herbal tea.

Simultaneous Determination of Chlorinated and Brominated Acetic Acids in Various Environmental Water Matrixes by High-Performance Liquid Chromatography-Inductively Coupled Plasma Tandem Mass Spectrometry without Sample Preparation

The halogenated acetic acids (HAAs) are generally considered as environmental contaminants and are suspected to pose a major public health concern. The inductively coupled plasma mass spectrometry (ICPMS) has been improved by coupling with the tandem mass spectrometry technology (ICPMS/MS), enabling ultratrace determination of heteroatoms. There have been few reports about the determination of chlorine-containing analytes by high-performance liquid chromatography (HPLC)-ICPMS/MS but none about utilizing this technique for the speciation analysis of organic halogenated compounds in environmental matrixes. We report a rapid method for the simultaneous determination of up to nine chlorinated and brominated acetic acids by HPLC-ICPMS/MS in Austrian surface, ground, and tap water. The chromatographic separation of the main five regulated haloacetic acids (so-called HAA5: chloroacetic acid, dichloroacetic acid, trichloroacetic acid, bromoacetic acid, and dibromoacetic acid) could be achieved in <6 min with limits of detection of 1.4-1.6 μg Cl L-1 and 0.8-1.5 μg Br L-1 for the chlorinated and brominated acetic acids, respectively. The method was validated through recovery experiments at four concentration levels (10-500 μg L-1) as well as by analyzing the U.S. Environmental Protection Agency (EPA) 552.2 CRM (certified reference material) in pure water and in three different water matrixes (tap, river, and groundwater), and thereby validated for repeatability (RSD% 1-10%), accuracy (±1.0-15%), and linearity (r2 = 0.9996-0.9999). The method fulfills the regulatory concentration limits by the EPA for HAA5 [maximum contaminant level (MCL) 60 μg L-1] and the limits currently being reviewed by the European Union for HAA9 (80 μg L-1) and demonstrates the advantages of HPLC-ICPMS/MS for the analysis of environmental water samples for halogen-tagged contaminants.

Ready-to-use, functionalized paper test strip used with a smartphone for the simultaneous on-site detection of free chlorine, hydrogen sulfide and formaldehyde in wastewater

The simultaneous detection of free chlorine, hydrogen sulfide and formaldehyde in wastewater samples was performed. In this report, we designed and fabricated functionalized paper test strips featuring detection zones that use 3-aminopropyltriethoxysilane (APTES) for the immobilization of chromogenic substrates to detect free chlorine, hydrogen sulfide and formaldehyde. After multiple chromogenic reactions, red, blue and purple colors were obtained on the detection zones and analyzed using a smartphone. Under optimum conditions, the paper test strips showed 1.7, 1.8 and 1.7 orders of magnitude for free chlorine, hydrogen sulfide and formaldehyde, respectively. This sensitivity is caused by the formation of homogeneous complexes on detection zones resulting from the chromogenic reagents immobilized on the detection zone via APTES. Through this strategy, free chlorine, hydrogen sulfide and formaldehyde analysis was achieved within 5 min with detection limits of 0.08, 0.14 and 0.13 mg L^-1, respectively. The developed paper test strip was able to selective detection of free chlorine, hydrogen sulfide and formaldehyde even in the presence of common interfering agents therefore, the test strip was highly selective. In a further demonstration, the developed functionalized paper test strip was successfully used for simultaneous detection of free chlorine, hydrogen sulfide and formaldehyde in wastewater in the field and exhibited with high precision and accuracy in detecting free chlorine, hydrogen sulfide and formaldehyde in wastewater samples. Compared to other methods, this assay was advantageous in terms of its low detection limit, time savings, good stability and highly portable format, which facilitates rapid on-site environmental monitoring with a smartphone.

Quantitative Metabolite Profiling of an Amino Group Containing Pharmaceutical in Human Plasma via Precolumn Derivatization and High-Performance Liquid Chromatography-Inductively Coupled Plasma Mass Spectrometry

Quantitative determination of the candidate drug molecule and its metabolites in biofluids and tissues is an inevitable step in the development of new pharmaceuticals. Because of the time-consuming and expensive nature of the current standard technique for quantitative metabolite profiling, i.e., radiolabeling followed by high-performance liquid chromatography (HPLC) with radiodetection, the development of alternative methodologies is of great interest. In this work, a simple, fast, sensitive, and accurate method for the quantitative metabolite profiling of an amino group containing drug (levothyroxine) and its metabolites in human plasma, based on precolumn derivatization followed by HPLC-inductively coupled plasma mass spectrometry (ICPMS), was developed and validated. To introduce a suitable "heteroelement" (defined here as an element that is detectable with ICPMS), an inexpensive and commercially available reagent, tetrabromophthalic anhydride (TBPA) was used for the derivatization of free NH₂-groups. The presence of a known number of I atoms in both the drug molecule and its metabolites enabled a cross-validation of the newly developed derivatization procedure and quantification based on monitoring of the introduced Br. The formation of the derivatives was quantitative, providing a 4:1 stoichiometric Br/NH₂ ratio. The derivatives were separated via reversed-phase HPLC with gradient elution. Bromine was determined via ICPMS at a mass-to-charge ratio of 79 using H₂ as a reaction gas to ensure interference-free detection, and iodine was determined at a mass-to-charge ratio of 127 for cross-validation purposes. The method developed shows a fit-for-purpose accuracy (recovery between 85% and 115%) and precision (repeatability <15% RSD). The limit of quantification (LoQ) for Br was approximately 100 μg/L.