Thermal stability of synthetic thyroid hormone l-thyroxine and l-thyroxine sodium salt hydrate both pure and in pharmaceutical formulations

Ionic Levothyroxine Formulations: Synthesis, Bioavailability, and Cytotoxicity Studies

Thyroid diseases affect a considerable portion of the population, with hypothyroidism being one of the most commonly reported thyroid diseases. Levothyroxine (T4) is clinically used to treat hypothyroidism and suppress thyroid stimulating hormone secretion in other thyroid diseases. In this work, an attempt to improve T4 solubility is made through the synthesis of ionic liquids (ILs) based on this drug. In this context, [Na][T4] was combined with choline [Ch]+ and 1-(2-hydroxyethyl)-3-methylimidazolium [C2OHMiM] + cations in order to prepare the desired T4-ILs. All compounds were characterized by NMR, ATR-FTIR, elemental analysis, and DSC, aiming to check their chemical structure, purities, and thermal properties. The serum, water, and PBS solubilities of the T4-ILs were compared to [Na][T4], as well as the permeability assays. It is important to note an improved adsorption capacity, in which no significant cytotoxicity was observed against L929 cells. [C2OHMiM][T4] seems to be a good alternative to the commercial levothyroxine sodium salt with promising bioavailability.

Levothyroxine sodium pentahydrate tablets - formulation considerations

Even though levothyroxine sodium pentahydrate tablets have been in the market since 1955, there continue to be recalls due to sub potency. We have comprehensively reviewed the factors affecting its stability in solid oral dosage forms. A compilation of marketed formulation compositions enabled the identification of the potential 'problem excipients'. Two excipient properties, hygroscopicity and microenvironmental acidity, appeared to be responsible for inducing drug instability. In drug products, depending on the formulation composition and storage conditions, the pentahydrate can dehydrate to highly reactive levothyroxine sodium monohydrate, or undergo salt disproportionation to the free acid form of the drug. The USP assay method (HPLC based) is insensitive to these different physical forms of the drug. The influence of physical form of levothyroxine on its chemical stability is incompletely understood. The USP has five product-specific dissolution tests reflecting the complexity in its evaluation.

A high capacity small molecule quinone cathode for rechargeable aqueous zinc-organic batteries

Rechargeable aqueous zinc-organic batteries are promising energy storage systems with low-cost aqueous electrolyte and zinc metal anode. The electrochemical properties can be systematically adjusted with molecular design on organic cathode materials. Herein, we use a symmetric small molecule quinone cathode, tetraamino-p-benzoquinone (TABQ), with desirable functional groups to protonate and accomplish dominated proton insertion from weakly acidic zinc electrolyte. The hydrogen bonding network formed with carbonyl and amino groups on the TABQ molecules allows facile proton conduction through the Grotthuss-type mechanism. It guarantees activation energies below 300 meV for charge transfer and proton diffusion. The TABQ cathode delivers a high capacity of 303 mAh g-1 at 0.1 A g-1 in a zinc-organic battery. With the increase of current density to 5 A g-1, 213 mAh g-1 capacity is still preserved with stable cycling for 1000 times. Our work proposes an effective approach towards high performance organic electrode materials.

Evaluation of the interaction of levothyroxine with bovine serum albumin using spectroscopic and molecular docking studies

Bovine serum albumin (BSA) acts as a carrier for many endogenous and exogenous compounds, such as thyroid hormones or corresponding drugs. Binding of the hydrophilic levothyroxine drug (LT4) to BSA is of significant pharmacological importance. In this work, UV-vis measurements were used to determine the pH value at which LT4 interacts optimally with proteins. The binding mechanism and affinity of the interaction between LT4 and BSA were investigated using Fourier-transform infrared spectroscopy (FT-IR), fluorescence, fluorescence resonance energy transfer (FRET), Surface Plasmon Resonance (SPR), supplemented by molecular docking analysis. Fluorescence measurements revealed the quenching effect of LT4 on the BSA intrinsic fluorescence and LT4 binding with BSA is driven by a ground-state complex formation that may be accompanied by a nonradiative energy transfer process. The thermodynamic parameters correspond to an enthalpic process, driven mainly by hydrogen bonds and van der Waals forces. Using SPR, the adsorbed amount of biomolecules was calculated and the binding affinity of LT4 with confined-BSA was characterized, indicating that the BSA immobilization plays an important role in LT4 binding. Docking studies confirmed the formation of the LT4-BSA complex with LT4 bound to site I on the BSA structure mainly with amino acid residues Trp 213, Tyr 137, Tyr 147. The calculation of the apparent association constant confirms the result obtained in SPR.Communicated by Ramaswamy H. Sarma.

The structure of human thyroglobulin

Thyroglobulin (TG) is the protein precursor of thyroid hormones, which are essential for growth, development and the control of metabolism in vertebrates1,2. Hormone synthesis from TG occurs in the thyroid gland via the iodination and coupling of pairs of tyrosines, and is completed by TG proteolysis3. Tyrosine proximity within TG is thought to enable the coupling reaction but hormonogenic tyrosines have not been clearly identified, and the lack of a three-dimensional structure of TG has prevented mechanistic understanding4. Here we present the structure of full-length human thyroglobulin at a resolution of approximately 3.5 Å, determined by cryo-electron microscopy. We identified all of the hormonogenic tyrosine pairs in the structure, and verified them using site-directed mutagenesis and in vitro hormone-production assays using human TG expressed in HEK293T cells. Our analysis revealed that the proximity, flexibility and solvent exposure of the tyrosines are the key characteristics of hormonogenic sites. We transferred the reaction sites from TG to an engineered tyrosine donor-acceptor pair in the unrelated bacterial maltose-binding protein (MBP), which yielded hormone production with an efficiency comparable to that of TG. Our study provides a framework to further understand the production and regulation of thyroid hormones.

Solid State Stability and Kinetics of Degradation for Candesartan-Pure Compound and Pharmaceutical Formulation

The aim of this work was to assess the impact of an excipient in a pharmaceutical formulation containing candesartan cilexetil over the decomposition of the active pharmaceutical ingredient and to comparatively investigate the kinetics of degradation during thermolysis in an oxidative atmosphere under controlled thermal stress. To achieve this, the samples were chosen as follows: pure candesartan cilexetil and a commercial tablet of 32 mg strength. As a first investigational tool, Universal attenuated total reflection Fourier transform infrared (UATR-FTIR) spectroscopy was chosen in order to confirm the purity and identity of the samples, as well as to check if any interactions took place in the tablet between candesartan cilexetil and excipients under ambient conditions. Later on, samples were investigated by thermal analysis, and the elucidation of the decomposition mechanism was achieved solely after performing an in-depth kinetic study, namely the use of the modified non-parametric kinetics (NPK) method, since other kinetic methods (American Society for Testing and Materials—ASTM E698, Friedman and Flynn–Wall–Ozawa) led to inadvertencies. The NPK method suggested that candesartan cilexetil and the tablet were degraded by the contribution of two steps, the main being represented by chemical degradation and the secondary being a physical transformation. The excipients chosen in the formulation seemed to have a stabilizing effect on the decomposition of the candesartan cilexetil that was incorporated into the tablet, relative to pure active pharmaceutical ingredient (API), since the apparent activation energy for the decomposition of the tablet was 192.5 kJ/mol, in comparison to 154.5 kJ/mol for the pure API.

Stability and Compatibility Studies of Levothyroxine Sodium in Solid Binary Systems-Instrumental Screening

The influence of excipients on the stability of sodium levothyroxine pentahydrate (LTSS) under ambient conditions and thermal stress was evaluated. Since LTSS is a synthetic hormone with a narrow therapeutic index, the interactions of LTSS with excipients can lead to a drastic diminution of therapeutic activity. Ten commonly used pharmaceutical excipients with different roles in solid formulations were chosen as components for binary mixtures containing LTSS, namely, starch, anhydrous lactose, D-mannitol, D-sorbitol, gelatin, calcium lactate pentahydrate, magnesium stearate, methyl 2-hydroxyethyl cellulose (Tylose), colloidal SiO₂ (Aerosil) and talc. As investigational tools, universal attenuated total reflectance- Fourier transform infrared spectroscopy UATR-FTIR spectroscopy and thermal analysis were chosen and used as follows: UATR-FTIR spectra were drawn up for samples kept under ambient conditions, while thermoanalytical tools (TG/DTG/HF data) were chosen to evaluate the inducing of interactions during thermal stress. The corroboration of instrumental results led to the conclusion that LTSS is incompatible with lactose, mannitol and sorbitol, and these excipients should not be considered in the development of new generic solid formulations.

Comparative Solid-State Stability of Perindopril Active Substance vs. Pharmaceutical Formulation

This paper presents the results obtained after studying the thermal stability and decomposition kinetics of perindopril erbumine as a pure active pharmaceutical ingredient as well as a solid pharmaceutical formulation containing the same active pharmaceutical ingredient (API). Since no data were found in the literature regarding the spectroscopic description, thermal behavior, or decomposition kinetics of perindopril, our goal was the evaluation of the compatibility of this antihypertensive agent with the excipients in the tablet under ambient conditions and to study the effect of thermal treatment on the stability of perindopril erbumine. ATR-FTIR (Attenuated Total Reflectance Fourier Transform Infrared) spectroscopy, thermal analysis (thermogravimetric mass curve (TG-thermogravimetry), derivative thermogravimetric mass curve (DTG), and heat flow (HF)) and model-free kinetics were chosen as investigational tools. Since thermal behavior is a simplistic approach in evaluating the thermal stability of pharmaceuticals, in-depth kinetic studies were carried out by classical kinetic methods (Kissinger and ASTM E698) and later with the isoconversional methods of Friedman, Kissinger-Akahira-Sunose and Flynn-Wall-Ozawa. It was shown that the main thermal degradation step of perindopril erbumine is characterized by activation energy between 59 and 69 kJ/mol (depending on the method used), while for the tablet, the values were around 170 kJ/mol. The used excipients (anhydrous colloidal silica, microcrystalline cellulose, lactose, and magnesium stearate) should be used in newly-developed generic solid pharmaceutical formulations, since they contribute to an increased thermal stability of perindopril erbumine.