Development and applications of liquid chromatography-mass spectrometry for simultaneous analysis of anti-malarial drugs in pharmaceutical formulations

Analytical Methodologies for Anti-Infective Orphan Drugs: A Comprehensive Review of FDA Approvals (2013-2023) Part 1

Most orphan diseases, which affect small patient populations, are chronic, incurable and often lead to early death. Due to small market size, orphan drugs developed to address these diseases receive little attention from the pharmaceutical industry. This lack of interest also applies to the development of analytical methods, which are crucial for drug analysis and quality control. Analysis of orphan drugs faces challenges, including a lack of reference standard and an inadequate number of samples for testing. In addition, constant adjustment of analytical techniques is demanded due to the lengthy development process. Financial constraints further hinder the advancement of analytical techniques since orphan drugs represents a narrow niche market and the pharmaceutical industry often focuses on research with greater impact, causing orphan drugs to be deprioritized. This review summarizes the analytical methods developed for US FDA-approved anti-infective orphan drugs (except antivirals) in the period between 2013 to 2023, covering in depth small molecules and broadly biologics in numerous dosage forms and biological samples. It covers the most common reported analytical methods, such as liquid chromatography, TLC, spectroscopy, and electrochemical analysis. This review highlights the crucial need for the continuous development of new analytical techniques to support the development and quality control of orphan drugs.

Optimization of HPLC-MS/MS method for determination of antimalarial adulterants in herbal products

The use of herbal products is booming all over the world because of being believed as safer than conventional drugs and free of side effects. However, there are untrustworthy manufacturers who adulterate herbal products by adding conventional drugs which might eventually lead to microbial resistance and herb-to-drug interactions. There is a need to develop methods for detecting adulterants in herbal products. A high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) method for simultaneous identification and determination of conventional antimalarials (chloroquine, quinine, sulfadoxine, pyrimethamine, mefloquine, lumefantrine, amodiaquine, artemisinin, dihydroartemisinin, artesunate and artemether) in herbal products was developed. Stable isotopically labelled compounds (artemether-d₃, quindine-d₃, and sulfadoxine-d₃) were used as internal standards (ISs) for quantitative analysis. Extraction of analytes was performed using methanol: water: formic acid (90:10:0.1, v/v) and chromatographic separation was done in a gradient mode using mobile phase A: Ultrapure water containing 0.1% formic acid and 1 mM ammonium formate and mobile phase B: Acetonitrile/methanol (50:50) containing 0.1% formic acid and 1 mM ammonium formate. The calibration curves were linear (r² ≥ 0.991) over the range of 0.001-0.3 µg mL^-1 for all compounds. The limit of detection (LOD) ranged from 0.002 to 0.02 μg mL^-1 while the limit of quantification (LOQ) ranged from 0.006 to 0.08 μg mL^-1. Accuracy, expressed as recovery of spiked herbal products ranged from 52 to 128%. The precision, expressed as percent relative standard deviation (%RSD) at two concentration levels, ranged from 1.0 to 13.8%. The matrix effect expressed as the matrix factor (MF) ranged from 0.77 to 0.97. The developed method was used to identify and quantify conventional antimalarials in herbal product samples from Tanzania. Ten out of 50 herbal products were found to contain amodiaquine, sulfadoxine, pyrimethamine, mefloquine, dihydroartemisinin, artemether and lumefantrine. The developed method is considered a valuable tool for getting a better understanding of the adulteration of conventional antimalarials in herbal products.

LC-MS/TOF Characterization and Stability Study of Artesunate in Different Solvent Systems

Artemisinin (ART) is a sesquiterpene lactone and a popular malaria drug used in many parts of the world. Artesunate (ARTS) is a semi-synthetic derivative of ART with improved pharmacokinetic properties. However, the half-life of ARTS is less than an hour in vivo. The analysis of this drug in vitro in different solvent systems using LC-MS/TOF showed a solvent-driven breakdown. ARTS breakdown formed several derivatives, including dihydroartemisinin (DHA), artemether (ARTM) and DHA-dimer among others, at different rates in different solvent composition systems. The change in temperature from room temperature to physiological temperature (37 °C) was found to enhance the rate of the ARTS breakdown. In methanol, ARTS mainly formed ARTM with a chromatographic peak decrease of about 3.13%, while methanol and water (90:10) v/v mainly gave rise to DHA and ARTM with about an 80% chromatographic peak decrease. On the other hand, ARTS in methanol and ammonium acetate (85:15) v/v formed DHA, ARTM, DHA-dimer and other reaction peaks with about a 97% peak decrease and the formation of an orange solution pointing to a molecular re-arrangement reaction. These results have an important bearing on research on the analysis of artemisinin drugs conducted on these common solvents.

Controlled release starch-lipid implant for the therapy of severe malaria

Parenteral depot systems can provide a constant release of drugs over a few days to months. Poly-(lactic acid) (PLA) and Poly-(lactide-co-glycolide) (PLGA) are the most commonly used polymers in the production of these systems. Finding alternatives to these polymers is of great importance to avoid certain drawbacks of these polymers (e.g. microacidity) and to increase the selection possibilities. In this study, different types of starch in combination with glycerol monostearate (GMS) were developed and investigated for their physicochemical properties and release characteristics. The noninvasive method of electron paramagnetic resonance (EPR) was used to study the release kinetics and mechanisms of nitroxide model drugs. The studies demonstrated the general suitability of the system composed of high amylose starch and GMS to form a controlled release system. For further characterization of the prepared system, formulations with different proportions of starch and GMS, loaded with the antimalarial agents artesunate or artemether were prepared. The implants were characterized with X-ray powder diffraction (XRPD) and texture analysis. The in vitro release studies demonstrated the sustained release of artemether over 6 days from a starch-based implant which matches desired kinetic for the treatment of severe malaria. In summary, a starch-based implant with appropriate mechanical properties was produced that can be a potential candidate for the treatment of severe malaria.

Validating a sensitive LCMS method for the quantitation of artemisinin in Artemisia spp. including material used in retracted clinical trials

Two recent clinical trials reported that Artemisia afra contained significant amounts of the bioactive compound artemisinin. We suspected sample contamination and therefore obtained the A. afra material for testing. A sensitive liquid chromatography mass spectrometry method was developed and validated for the accurate quantitation of artemisinin in Artemisia annua and A. afra plant material. This validated analytical method, with a limit of detection of 0.22 ng/mL (0.22 pg on column), which is an order of magnitude more sensitive than recently published methods, was applied to quantify artemisinin in a collection of Artemisia samples including the A. afra material that was used in the clinical trials.All 16A. annua samples (oldest sample 21 years old) contained the expected levels of artemisinin (0.12-0.63%) whilst none of the A. afra samples in our collection contained any trace of artemisinin (> 0.00001%). However, the A. afra samples used in the clinical trials did contain detectable amounts of artemisinin (0.0013% and 0.0011% vs the claimed amount of 0.0045%).The authors of the clinical trials suspected that cross contamination during sample handling and preparation was likely, reconfirming the importance of having analytical quality control methods in place before clinical trials are conducted. Quality control and ensuring safety of trial participants is of utmost importance.

Metabolic profile of irradiated whole blood by chemical isotope-labeling liquid chromatography-mass spectrometry

Irradiated blood is a new type of blood product used to prevent transfusion-associated graft-versus-host disease. However, the effects of irradiation on the metabolism of plasma, red blood cells (RBCs), and peripheral blood mononuclear cells (PBMCs) are largely unknown. We developed a workflow for testing metabolic changes in whole blood to determine the impact of irradiation by chemical isotope labeling liquid chromatography-mass spectrometry (CIL LC-MS). Blood parameters, PBMC proliferation and apoptosis were examined before and after irradiation. Next, the amine/phenol metabolites in the blood components were assayed by 12C- and13C-dansylation labeling LC-MS. We identified 1654, 1730, and 1666 peak pairs in plasma, RBCs, and PBMCs, respectively. We screened out 367, 177, and 219 significant metabolites in plasma, RBCs, and PBMCs, respectively, by principle component analyses, volcano plots, and Venn plots. Metabolic pathway analyses showed that irradiation modulated taurine and hypotaurine metabolism in plasma and purine metabolism in RBCs and PBMCs. Changes in potential biomarkers, including an increase in hypoxanthine level and a decrease in adenine level, may be related to the dysfunction of DNA synthesis in PBMCs. The decreased AMP level in RBCs may interfere with RBC storage lesions. Our research provides a more comprehensive perspective on blood metabolism associated with irradiation.