Degradation of emerging contaminants: Effect of thermal treatment on nb2o5 as photocatalyst

Photoacoustic Spectroscopy of Titanium Dioxide, Niobium Pentoxide, Titanium:Niobium, and Ruthenium-Modified Oxides Synthesized Using Sol-Gel Methodology

The aim of this work was the development and morphological/chemical, spectroscopic, and structural characterization of titanium dioxide, niobium pentoxide, and titanium:niobium (Ti:Nb) oxides, as well as materials modified with ruthenium (Ru) with the purpose of providing improvement in photoactivation capacity with visible sunlight radiation. The new materials synthesized using the sol-gel methodology were characterized using the following techniques: scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), photoacoustic spectroscopy (PAS), and X-ray diffraction (XRD). The SEM-EDS analyses showed the high purity of the bases, and the modified samples showed the adsorption of ruthenium on the surface with the crystals' formation and visible agglomerates for higher calcination temperature. The nondestructive characterization of PAS in the ultraviolet visible region suggested that increasing calcination temperature promoted changes in chemical structures and an apparent decrease in gap energy. The separation of superimposed absorption bands referring to charge transfers from the ligand to the metal and the nanodomains of the transition metals suggested the possible absorption centers present at the absorption threshold of the analyzed oxides. Through the XRD analysis, the formation of stable phases such as T-Nb16.8O42, o-Nb12O29, and rutile was observed at a lower temperature level, suggesting pore induction and an increase in surface area for the oxides studied, at a calcination temperature below that expected by the related literature. In addition, the synthesis with a higher temperature level altered the previously existing morphologies of the Ti:Nb, base and modified with Ru, forming the new mixed crystallographic phases Ti2Nb10O29 and TiNb2O7, respectively. As several semiconductor oxide applications aim to reduce costs with photoexcitation under visible light, the modified Ti:Ru oxide calcined at a temperature of 800 °C and synthesized according to the sol-gel methodology used in this work is suggested as the optimum preparation point. This study presented the formation of a stable crystallographic phase (rutile), a significant decrease in gap energy (2.01 eV), and a visible absorption threshold (620 nm).

Sol-gel and Pechini niobium modified: synthesis, characterization and application in the 2,4-D herbicide degradation

In this work, a comparison was made between the synthesis of niobium-based materials (Nb2O5), both in terms of material characterization and catalytic performance. The methods used were chemical mixtures: modified sol-gel and Pechini. The materials were calcined at different temperatures (753, 873 and 993K) and characterized by the following techniques: photoacousticspectroscopy (PAS), zero charge point (pHPZC), scanning electron microscopy (SEM/EDS), thermogravimetric analysis (TGA/DTG) and X-ray diffraction (XRD). The photocatalytic process was carried out to evaluate the degradation of 2,4-dichlorophenoxyacetic acid (2,4-D) under UV radiation (250 W mercury vapor lamp) and different experimental conditions. In addition, to better understand the influence of parameters such as pH, catalyst concentration (0.2, 0.5 and 0.8 g L-1) and calcination temperature, a Design of Experiments (DoE) was used. The results indicated that despite having similar structures and phases in the XRD analysis, the morphology presents two distinct surfaces, due to the preparation method. Differences in the synthesis method affected the catalytic activity in the parameters studied. Although the zero charge point values are close (6.18-6.36), we observed differences in the band gap depending on the calcination temperature. In the optimal condition studied, the catalyst prepared by the sol-gel method obtained the best results.

Superior functionality of niobium pentoxide nano-rod/tripod photocatalyst synthesized using polyethyleneimine as a soft template for the abatement of methylene blue under UV and visible irradiation

Polyethyleneimine (PEI) capping agent-cum-template-mediated synthesis of niobium oxide nanoparticles is reported to explore its impact on the resultant morphology, porosity, crystallinity, phase complexation, and thus on the photocatalytic activity. The resultant niobium oxides calcined at 800°C and 1000°C crystallized into highly ordered nano-rod/tripod nanostructure with inter-rod angle <120° having orthorhombic phase and heavily agglomerated rod-like nanostructures having monoclinic crystal phase, respectively. Contrary to the expectations, the nano-rod/tripods showed superior photocatalytic degradation kinetics and high adsorption of methylene blue dye in the hydrocolloid than formerly reported monoclinic nanoparticles. The best adsorption capability and photocatalytic activity are observed for the sample calcined at 800°C, resulting in a combined degradation efficiency of 98.8% of methylene blue dye. The adsorption characteristics, stability of the hydrocolloid system, the existence of oxygen vacancies, and the distinct morphology of the photocatalytic nano-rod/tripods are mainly responsible for this behavior. The process and the performance of unique nanostructure over others presents a superior alternative.

Pharmaceutical compounds photolysis: pH influence

The operating parameters of photolytic and photocatalytic reaction processes directly affect the efficiency in the degradation of compounds. In particular, pH is a variable that needs to be considered as it exerts great influence on adsorption, absorption, solubility, among others. This study describes the application of the photolytic process, at different pHs, in the degradation of different pharmaceutical compounds. Photolytic reactions were performed with the following contaminants: acetylsalicylic acid (ASA), ibuprofen (IBP) and paracetamol (PAR). In addition, a comparison was performed using the commercial catalyst P25. The results indicated a great influence of the pH in the kinetic constant of the photodegradation and in the UV absorbance of the species. In particular, the degradation of ASA and PAR were favored with the reduction of pH, while the degradation of IBU and SA were favored by increasing. Also, the chromatograms indicated that pH may affect the by-products formed. In comparison, the photocatalysis process in the presence of P25 proved to be much more effective, but it was not possible to achieve complete mineralization of the compounds.

Cu/Nb2O5, Fe/Nb2O5 and Cu-Fe/Nb2O5 applied in salicylic acid degradation: Parameters studies and photocatalytic activity

This study describes the synthesis of Cu/Nb₂O₅, Fe/Nb₂O₅, and Cu-Fe/Nb₂O₅ catalysts obtained by incorporating copper and/or iron metals into niobium pentoxide (Nb₂O₅). The new materials were characterized by the following techniques: Thermogravimetric Analysis (TA), surface and pore analysis, X-ray diffractometry (XRD), and Fourier Transform Infrared Spectroscopy (FT-IR). The catalyst was applied in the photocatalytic degradation of salicylic acid (SA). The influence of different parameters (calcined temperature, pH, and metal addition) on the photocatalytic reaction was evaluated. The results indicated that catalysts containing copper were more active and pH influenced the SA degradation process. SA removal results indicated that Cu/Nb₂O₅ photocatalyst presented a 1.5 fold higher degradation after 120 min in comparison to Cu-Fe/Nb₂O₅ and 4.6 fold higher than Fe/Nb₂O₅ catalyst, all them calcined at 400 °C. In tests carried out in the presence of formic acid, increasing the pH from about 3 to 7 allowed an almost 3.4-fold increase in SA degradation for the Cu-Fe/Nb₂O₅ catalyst calcined at 400 °C.

Recent Advances in Endocrine Disrupting Compounds Degradation through Metal Oxide-Based Nanomaterials

Endocrine Disrupting Compounds (EDCs) comprise a class of natural or synthetic molecules and groups of substances which are considered as emerging contaminants due to their toxicity and danger for the ecosystems, including human health. Nowadays, the presence of EDCs in water and wastewater has become a global problem, which is challenging the scientific community to address the development and application of effective strategies for their removal from the environment. Particularly, catalytic and photocatalytic degradation processes employing nanostructured materials based on metal oxides, mainly acting through the generation of reactive oxygen species, are widely explored to eradicate EDCs from water. In this review, we report the recent advances described by the major publications in recent years and focused on the degradation processes of several classes of EDCs, such as plastic components and additives, agricultural chemicals, pharmaceuticals, and personal care products, which were realized by using novel metal oxide-based nanomaterials. A variety of doped, hybrid, composite and heterostructured semiconductors were reported, whose performances are influenced by their chemical, structural as well as morphological features. Along with photocatalysis, alternative heterogeneous advanced oxidation processes are in development, and their combination may be a promising way toward industrial scale application.