Non-synergistic photocatalysis of CO2-to-CO conversion by a binuclear complex of rigidly linking two cobalt catalytic centers

The Synthesis, Structural Characterization, and DFT Calculation of a New Binuclear Gd(III) Complex with 4-Aacetylphenoxyacetic Acid and 1,10-Phenanthroline Ligands and Its Roles in Catalytic Activity

A new binuclear Gd(III) complex, [Gd2(L)6(Phen)2]·4H2O, was synthesized via the reaction of gadolinium(III) nitrate hexahydrate, 4-acetylphenoxyacetic acid (HL), NaOH, and 1,10-phenanthroline (Phen) in a solution of water-ethanol (v:v = 1:1). The Gd(III) complex was characterized using IR, UV-vis, TG-DSC, fluorescence, and single-crystal X-ray diffraction analyses. The results showed that the Gd(III) complex crystallizes in the triclinic system, space group P-1, and each Gd(III) ion was coordinated with two nitrogen atoms (N1, N2, or N1a, and N2a) from two Phen ligands and seven oxygen atoms (O1, O2, O7a, O9, O8, O8a, O10a, or O1a, O2a, O7, O8, O8a, O9a, and O10) from six L ligands, respectively, forming a nine-coordinated coordination mode. The Gd(III) complex molecules formed a one-dimensional chained and three-dimensional network structure via benzenering π-π stacking. The Hirschfeld surface analysis and the calculations of the electron density distributions of the frontier molecular orbitals of the Gd(III) complex were performed. The catalytic activities of the photocatalytic CO2 reduction and benzyl alcohol oxidation using the Gd(III) complex as a catalyst were performed. The results of the photocatalytic CO2 reduction showed that the yield and the selectivity of CO reached 41.5 μmol/g and more than 99% after four hours, respectively. The results of the benzyl alcohol oxidation showed that the yield of benzaldehyde was 45.7% at 120 °C with THF as the solvent under 0.5 MPa O2 within 2 h.

Synthesis, Structural Characterization, and Hirschfeld Surface Analysis of a New Cu(II) Complex and Its Role in Photocatalytic CO2 Reduction

A new Cu(II) complex, [CuL1L2(CH3COO)2(H2O)]·H2O, was synthesized by the reaction of Cu(CH3COO)2·H2O, 6-phenylpyridine-2-carboxylic acid (HL1), and 4-[5-(pyridin-4-yl)-1,3,4-oxadiazol-2-yl]pyridine (L2) in ethanol-water (v:v = 1:1) solution. The Cu(II) complex was characterized using elemental analysis, IR, UV-vis, TG-DTA, and single-crystal X-ray analysis. The fluorescence properties of the copper complex were also evaluated. The structural analysis results show that the Cu(II) complex crystallizes in the triclinic system with space group P-1. The Cu(II) ion in the complex is five-coordinated with one O atom (O2) and one N atom (N1) from one 6-phenylpyridine-2-carboxylate ligand (L1), one N atom (N2) from 4-[5-(pyridin-4-yl)-1,3,4-oxadiazol-2-yl]pyridine ligand (L2), one O atom (O4) from acetate, and one O atom (O5) from a coordinated water molecule, and it adopts a distorted trigonal bipyramidal geometry. Cu(II) complex molecules form a two-dimensional layer structure through intramolecular and intermolecular O-H…O hydrogen bonding. The two-dimensional layer structures further form a three-dimensional network structure by π-π stacking interactions of aromatic rings. The analysis of the Hirschfeld surface of the Cu(II) complex shows that the H…H contacts made the most significant contribution (46.6%) to the Hirschfeld surface, followed by O…H/H…O, N…H/H…N and C…H/H…C contacts with contributions of 14.2%, 13.8%, and 10.2%, respectively. In addition, the photocatalytic CO2 reduction using Cu(II) complex as a catalyst is investigated under UV-vis light irradiation. The findings reveal that the main product is CO, with a yield of 10.34 μmol/g and a selectivity of 89.4% after three hours.

Synthesis, Structural Characterization, Hirschfeld Surface Analysis, Density Functional Theory, and Photocatalytic CO2 Reduction Activity of a New Ca(II) Complex with a Bis-Schiff Base Ligand

A new bis-Schiff base (L) Ca(II) complex, CaL, was synthesized by the reaction of calcium perchlorate tetrahydrate, 1,3-diamino-2-hydroxypropane, and 2-formyl phenoxyacetic acid in an ethanol-water (v:v = 2:1) solution and characterized by IR, UV-vis, TG-DTA, and X-ray single crystal diffraction analysis. The structural analysis indicates that the Ca(II) complex crystallizes in the monoclinic system, space group P121/n1, and the Ca(II) ions are six-coordinated with four O atoms (O8, O9, O11, O12, or O1, O2, O4, O6) and two N atoms (N1, N2, or N3, N4) of one bis-Schiff base ligand. The Ca(II) complex forms a tetramer by intermolecular O-H…O hydrogen bonds. The tetramer units further form a three-dimensional network structure by π-π stacking interactions of benzene rings. The Hirschfeld surface of the Ca(II) complex shows that the H…H contacts represent the largest contribution (41.6%) to the Hirschfeld surface, followed by O…H/H…O and C…H/H…C contacts with contributions of 35.1% and 18.1%, respectively. To understand the electronic structure of the Ca(II) complex, the DFT calculations were carried out. The photocatalytic CO2 reduction test of the Ca(II) complex exhibited a yield of 47.9 μmol/g (CO) and a CO selectivity of 99.3% after six hours.

Catalytic CO2 Reduction with Heptacoordinated Polypyridine Complexes: Switching the Selectivity via Metal Replacement

The discovery of molecular catalysts for the CO2 reduction reaction (CO2 RR) in the presence of water, which are both effective and selective towards the generation of carbon-based products, is a critical task. Herein we report the catalytic activity towards the CO2 RR in acetonitrile/water mixtures by a cobalt complex and its iron analog both featuring the same redox-active ligand and an unusual seven-coordination environment. Bulk electrolysis experiments show that the cobalt complex mainly yields formate (52 % selectivity at an applied potential of -2.0 V vs Fc+ /Fc and 1 % H2 O) or H2 (up to 86 % selectivity at higher applied bias and water content), while the iron complex always delivers CO as the major product (selectivity >74 %). The different catalytic behavior is further confirmed under photochemical conditions with the [Ru(bpy)3 ]2+ sensitizer (bpy=2,2'-bipyridine) and N,N-diisopropylethylamine as electron donor, where the cobalt complex leads to preferential H2 formation (up to 89 % selectivity), while the iron analog quantitatively generates CO (up to 88 % selectivity). This is ascribed to a preference towards a metal-hydride vs. a metal-carboxyl pathway for the cobalt and the iron complex, respectively, and highlights how metal replacement may effectively impact on the reactivity of transition metal complexes towards solar fuel formation.

Metal-organic frameworks (MOFs) for photoelectrocatalytic (PEC) reducing carbon dioxide (CO2) to hydrocarbon fuels

MOF-based photoelectrocatalysis (PEC) using CO2 as an electron donor offers a green, clean, and extensible way to make hydrocarbon fuels under more tolerant conditions. Herein, basic principles of PEC reduction of CO2 and the preparation methods and characterization techniques of MOF-based materials are summarized. Furthermore, three applications of MOFs for improving the photoelectrocatalytic performance of CO2 reduction are described: (i) as photoelectrode alone; (ii) as a co-catalyst of semiconductor photoelectrode or as a substrate for loading dyes, quantum dots, and other co-catalysts; (iii) as one of the components of heterojunction structure. Challenges and future wave surrounding the development of robust PEC CO2 systems based on MOF materials are also discussed briefly.

Cobalt-based tripodal complexes as molecular catalysts for photocatalytic CO2 reduction

Construction of artificial photosynthetic systems including CO2 reduction is a promising pathway to produce carbon-neutral fuels and mitigate the greenhouse effect concurrently. However, the exploitation of earth-abundant catalysts for photocatalytic CO2 reduction remains a fundamental challenge, which can be assisted by a systematic summary focusing on a specific catalyst family. Cobalt-based complexes featuring tripodal ligands should merit more insightful discussion and summarization, as they are one of the most examined catalyst families for CO2 photoreduction. In this feature article, the key developments of cobalt-based tripodal complexes as molecular catalysts for light-driven CO2 reduction are discussed to offer an upcoming perspective, analyzing the present progress in electronic/steric tuning through ligand modification and dinuclear design to achieve a synergistic effect, as well as the bottlenecks for further development.

Bimetallic Molecular Catalyst Design for Carbon Dioxide Reduction

The core challenge in developing cost-efficient catalysts for carbon dioxide (CO2 ) conversion mainly lies in controlling its complex reaction pathways. One such strategy exploits bimetallic cooperativity, which relies on the synergistic interaction between two metal centers to activate and convert the CO2 substrate. While this approach has seen an important trend in heterogeneous catalysis as a handle to control stabilities of surface intermediates, it has not often been utilized in molecular and heterogenized molecular catalytic systems. In this review, we gather general principles on how natural CO2 activating enzymes take advantage of bimetallic strategy and how phosphines, cyclams, polypyridyls, porphyrins, and cryptates-based homo- and hetero-bimetallic molecular catalysts can help understand the synergistic effect of two metal centers.