Clavicle hook plate fixation for displaced lateral-third clavicle fractures (Neer type II): a functional outcome study

Clavicle refractures after hardware removal: are there risk factors? A retrospective cohort study

PURPOSE

Removal of symptomatic hardware after fracture fixation is common, especially in patients with clavicle fracture. Yet, refracture after hardware removal is a relatively common complication in those patients. The aim of this study was to identify risk factors for clavicle refractures that could be influenced by the surgical treatment provided.

METHODS

All patients from a level one trauma center from 2017 to 2022 were screened for eligibility. Inclusion criteria included hardware removal after plate osteosynthesis of the clavicle, age ≥ 18 years, and signed informed consent. Groups were stratified according to occurrence of refracture: no-refracture (NR) vs. refracture (R). Nearest-neighbor matching in a ratio of 5:1 was performed. Parameter investigated included baseline demographics, fracture characteristics and surgical treatment details. A subgroup analysis of only clavicle shaft fractures was performed.

RESULTS

Sixty patients were included with 50 patients in Group NR and 10 in Group R. Baseline characteristics were comparable between the groups. A subgroup analysis on shaft fractures revealed that a significantly larger working length (number of empty screw holes adjacent to the fracture site) in Group NR (1.94 ± 0.85) compared to the refracture group (1.20 ± 0.92) (p = 0.042). Logistic regression yielded an inverse correlation with the number of empty screw holes to the fracture site and the occurrence of refractures (OR 0.369, 95% CI 0.132-0.873; p = 0.035). Time in situ, lag screw application, plate positioning and the total amount of screws did not affect either of the groups.

CONCLUSION

An increased working length in patients with clavicle shaft fractures might be a protective measure for occurrence of refractures after hardware removal.

Biomechanical comparison between low profile 2.7 mm distal locking hook plate and 3.5 mm distal locking hook plate for acromioclavicular joint injury: A finite element analysis

PURPOSE

Although hook plate fixation is popularly used, concerns exist regarding periprosthetic fractures and the necessity to remove the plate to prevent subacromial erosion and subsequent acromion fracture, due to its non-anatomical design. We hypothesized that a low profile 2.7 mm distal locking hook plate would provide comparable stability to a properly used 3.5 mm distal locking hook plate MATERIALS AND METHODS: A 3.5 mm distal locking plate (type 1) and a low profile 2.7 mm plate (type 2) were assessed by finite element analysis. Peak von Mises stress (PVMS) was calculated on the acromion's undersurface, clavicle shaft, and hook, focusing on how these stresses varied with the number and placement of distal locking screws.

RESULTS

Increased distal screws in both types led to lower PVMS on the acromion's undersurface and the hook, with the lowest acromion PVMS observed in type 2 with three distal screws, and on the hook in type 1 with two distal screws. Increasing the number of distal screws similarly reduced PVMS on the clavicle shaft, with the lowest in type 1 with two distal screws. In both plate types, the most posterior distal locking screw played a crucial role in distributing stress across the acromion and the hook.

CONCLUSION

The low profile 2.7 mm distal locking hook plate showed comparable biomechanical results to the 3.5 mm distal locking hook plate. Increasing the number of distal locking screws showed less stress concentration on the bone and hook in both models. The most posterior distal locking screw showed an essential role in stress distribution.

Clavicle Nonunion and Malunion: Surgical Interventions for Functional Improvement

Clavicle nonunion and malunion are relatively uncommon but, when symptomatic, can result in pain and dysfunction that requires surgical intervention. Various reconstructive and grafting techniques are available to achieve stable fixation and union. In the setting of persistent nonunion, vascularized bone grafting may be necessary. A thorough understanding of the patient's type of nonunion and potential for healing is crucial for achieving satisfactory results because is thoughtful preoperative planning and surgical fixation.

Bilateral symmetrical distal clavicle fractures (Neer type II): A case of rare injury

BACKGROUND

Neer type II/bilateral distal clavicular fracture is an extremely rare injury combination, with few cases having been reported.

CASE PRESENTATION

This paper reports a case of polytrauma in a 16-year-old female following a road traffic accident. The radiographs revealed distal fractures of the bilateral clavicles (Neer type II), and an open reduction and internal fixation procedure was performed. Initially, the distal fracture of the right clavicle was fixed with a six-hole hook plate before the fracture of the left clavicle was fixed using a pre-contoured lateral locking plate following reduction. At the two-year follow-up, the patient had an excellent constant score in terms of the bilateral shoulder joints.

CONCLUSION

It is important to achieve stability and to aim for excellence in terms of full shoulder function in this rare combination injury.

A systematic review and meta-analysis comparing the use of hook plates and superior plates in the treatment of displaced distal clavicle fractures

INTRODUCTION

Non-operative treatment of displaced distal clavicle fractures results in high non-union and yet there is no consensus on superior treatment modality. While there are a number of different techniques available for fixation, hook plate (HP) has been used most commonly. A number of modern techniques, including superior plate (SP), have shown less complications but equivocal union rate and shoulder function. The aim of this systematic review and meta-analysis is to compare the outcome of HP fixation with superior plate in surgical fixation of displaced distal clavicle fractures.

PATIENTS AND METHODS

A review of the online databases MEDLINE and Embase was conducted on 15 January 2021 according to PRISMA guidelines. The review was registered prospectively in the PROSPERO database. Clinical studies reporting union rate, complications and shoulder function were included. The studies were appraised using the Methodological Index for Non-Randomized Studies (MINORS) tool.

RESULTS

The search strategy identified 42 studies eligible for inclusion with a total of 1,261 patients. These included 17 hook-plate case series (n = 573), 18 superior plate case series, of which 6 used SP alone (n = 223) and 12 SP and simultaneous CCLR case series (n = 189), and 7 studies comparing HP and SP (n = 276). The overall complication rate was significantly higher with HP when compared to SP [(32.7% vs 12.7%; OR 6.31 (95% CI: 2.67-14.91)]. The overall union rates in the case series appeared comparable in the current SR; HP 96.4%, SP 96.9% and SP with simultaneous CCLR 97.9%. Shoulder function was most commonly assessed using CM score and the mean ranged from 83.8 to 97.2 in HP, 89 to 98 in SP group and 90.6 to 97.6 in SP with CCLR. Meta-analysis of CM score failed to show a significant difference for HP versus SP (pooled weighted mean difference was 2.67 (95% CI: - 0.09 to 5.43) with a trend to favour SP fixation.

CONCLUSION

The current review has demonstrated that HP, SP alone or with CCLR all offer excellent union rate and appear to provide comparative functional outcomes. However, HP is associated with significantly higher complication rates.

Triple Endobutton technique for the treatment of Neer type II lateral clavicle fractures: 2-year findings

BACKGROUND

Although various kinds of operative procedures have been reported in the literature, there is still no undisputed gold standard technique for the treatment of Neer type II lateral clavicle fractures. This trauma is classified as a bone fracture, but it is primarily a ligamentous problem due to the instability it generates. This study analyzed the clinical and radiological results of treatment for Neer type II lateral clavicle fractures using the triple Endobutton (Smith & Nephew) technique in 20 patients with at least 2 years of follow-up.

METHODS

This study enrolled 20 patients with Neer type II distal clavicle fractures who underwent the triple Endobutton technique using 3 Endobuttons (1 with a closed loop and 2 without) and 3 No. 5 Ethibond sutures (Ethicon Inc.) from October 2017 to May 2020. Patients were assessed with clinical and radiological follow-up at 3, 6, 12, and 24 months postoperatively. Clinical assessments consisted of the visual analog scale and the Constant score. Radiological evaluation was achieved by measuring the coracoclavicular distance.

RESULTS

The mean follow-up was 35 ± 9 months (range, 24-55 months). The visual analog scale and Constant scores revealed significant improvements from 6 ± 1 (range, 4-8) and 42 ± 4 (range, 35-48) scores preoperatively to 1 ± 1 (range, 0-1) and 94 ± 2 (range, 90-98) scores at the final evaluation, respectively (P < .001). The coracoclavicular distance of the injured side was an average of 9 ± 1 mm (range, 7-12 mm) at the final follow-up radiograph which was not significantly different from that of the contralateral side (P = .75).

CONCLUSIONS

In this study, the triple Endobutton technique was a safe, reliable, and novel surgical technique that yielded good to excellent short-term clinical and radiological outcomes for the treatment of Neer type II distal clavicle fractures.

Comparison of functional outcome and complications of locking plate versus coracoclavicular fixation in the treatment of unstable distal clavicle fractures: the multicenter, propensity-matched TRON study

PURPOSE

This multicenter, retrospective study aimed to compare clinical outcomes and complications between locking plate fixation and new coracoclavicular (CC) fixation for patients with unstable distal clavicle fracture.

METHODS

We included 142 patients in this TRON study. The mean follow-up was 15.5 (6-31) months. The patients were divided into two groups: the locking plate group (Group L) and CC fixation group (Group C). To adjust for baseline differences between the groups, a propensity score algorithm was used to match two groups in a 1:1 ratio. After matching, we compared operation time and the University of California Los Angeles (UCLA) shoulder score at 3 and 6 months postoperatively and at last follow-up as clinical outcomes and the rate of complications.

RESULTS

After matching, 20 cases from each group remained. Operation time was shorter in Group C (75 [22, 111] vs. 100 [38, 120] min; P = 0.023). At 3 months postoperatively, UCLA score in Group C was better, but no significant differences between the groups were found at 6 months and last follow-up after surgery. The rate of complications was not significantly different between the groups.

CONCLUSION

CC fixation might be equivalent to locking plate fixation in clinical outcome, and the operation time is shorter than that required for locking plate fixation.

Open reduction and tunneled suspensory fixation for lateral end of clavicle fractures: surgical technique

Unstable distal end clavicle fractures are associated with significant rates of nonunion and poor functional outcomes. Surgical treatment is paramount for unstable fracture patterns; however, treatment options are various, with each having its advantages and drawbacks. Recently, suture-based coracoclavicular fixation techniques using suture buttons have been implemented with high union rates, satisfactory shoulder function, and low rates of complications. In this report, we demonstrate a modified fixation of unstable lateral clavicle fractures. Our technique entails open reduction and suspensory coracoclavicular fixation using suture anchors and suture button devices with supplemental acromioclavicular suspensory fixation.

Clinical Impact of Malunion After All-Arthroscopic Coracoclavicular Stabilization for Displaced and Unstable Lateral Clavicle Fractures

OBJECTIVE

To evaluate the clinical outcome of lateral clavicle malunion treated with all-arthroscopic coracoclavicular (CC) stabilization.

DESIGN

Retrospective, case series.

SETTING

Department of hand and upper extremity surgery, university hospital center.

PATIENTS

Forty-five patients with unstable and displaced lateral clavicle fracture treated between January 2015 and August 2019 were included in the study.

INTERVENTION

Closed reduction and arthroscopic CC stabilization using cortical buttons.

MAIN OUTCOME MEASUREMENTS

Shoulder pain and active motion. Patient-reported outcome measures included the Constant score, the Subjective Shoulder Value, the AcromioClavicular Joint Instability score, and the Specific AcromioClavicular Score. Radiographic evaluation assessed bony union and malunion.

RESULTS

Mean duration of follow-up was 25 months (12-60 months). Five patients (11%) had lateral clavicle nonunion and 7 (16%) had lateral clavicle malunion (5 in the coronal plane and 2 in the axial plane). Lateral clavicle malunion did not significantly affect clinical or functional outcomes (P > 0.05). Mean active shoulder motion was forward flexion 163 degrees (SD 28), abduction 162 degrees (SD 26), and external rotation 63 degrees (SD 21). On average, the patients scored 88.3 (SD 17.7) in the Constant score, 90% (SD 12) in the Subjective Shoulder Value, 88.8 (SD 9.4) in the AcromioClavicular Joint Instability score, and 11.4 (SD 8.5) for SACS. The overall complication rate was 38% (including 7 malunions, 5 nonunions, 2 adhesive capsulitis, and 3 button malpositions).

CONCLUSIONS

Closed reduction and internal fixation of lateral clavicle fracture with all-arthroscopic CC stabilization using cortical button potentiates bony union but may generate lateral clavicle malunion, which does not affect the clinical or functional outcome. This result can be attributed to CC ligament healing and acromioclavicular joint congruence. All-arthroscopic CC stabilization is a minimally invasive but demanding surgical alternative for managing unstable and displaced lateral clavicle fracture.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Comparison of Locking Plate Fixation and Coracoclavicular Ligament Reconstruction for Neer Type 2B Distal Clavicle Fractures

Background:

There remains no consensus regarding which repair technique provides the most optimal results for unstable distal clavicle fractures.

Purpose:

To compare radiologic and clinical outcomes between locking plate fixation and anatomic coracoclavicular (CC) ligament reconstruction for patients with unstable distal clavicle fractures.

Study Design:

Cohort study; Level of evidence, 3.

Methods:

The study included 41 patients with Neer type 2B distal clavicle fracture. In group A (n = 15), patients were treated using CC ligament reconstruction with autologous palmaris longus tendon, artificial tape, and Steinmann pin fixation; in group B (n = 26), patients were treated using anatomic locking plate fixation. All patients had a minimum 2 years of follow-up. CC distance and arthrosis of the acromioclavicular joint were assessed radiographically. Clinical outcomes—including range of motion, visual analog scale for pain, American Shoulder and Elbow Surgeons rating scale, and Constant score—were compared between the groups using the paired Student t test and Fisher exact test.

Results:

Bone union was attained in all patients. In both groups, the CC distance decreased significantly from presurgery to final follow-up: group A, from 16.25 ± 4.75 to 7.66 ± 2.61 mm ( P < .001); group B, from 17.3 ± 4.07 to 9.33 ± 2.01 mm ( P < .001). The final CC distance was significantly greater in group B (7.66 vs 9.33 mm in groups A and B, respectively; P = .028). Osteoarthritis of the acromioclavicular joint occurred in 13 of 41 patients (3 in group A and 10 in group B). At final follow-up, there was no statistical significance between the groups in range of motion, and clinical outcome scores were satisfactory in both groups, with no statistical difference between them.

Conclusion:

Anatomic locking plate and anatomic reconstruction of the CC ligament showed good clinical results, so both techniques can be considered reliable for restoring stability. However, CC ligament reconstruction had better CC distance on radiologic assessment and did not require removal surgery, so it may be the preferable surgical option to treat unstable distal clavicle fractures (Neer type 2B).

Complications and Frequency of Surgical Treatment with AO-Type Hook Plate in Shoulder Trauma: A Retrospective Study

We investigated the complications and frequency of hook plate fixation in patients with shoulder trauma. We reviewed 216 cases of hook plate fixation use at our hospital between January 2010 and May 2020. Finally, we included 76 cases of acute distal clavicle fracture (DCF) and 84 cases of acute acromioclavicular joint dislocation (ACD). We investigated all complications after hook plate use, bony union in the DCF group, and reduction loss in the ACD group. We defined painful shoulder stiffness (PSS) as aggravating resting pain with stiff shoulder, and pain on shoulder elevation (PSE) as continued shoulder pain on elevation without PSS before plate removal. PSS was managed with intra-articular steroid injections or manipulation with or without arthroscopic capsular release (ACR). PSS occurred in 36 and 33 cases of DCF and ACD, respectively. PSE occurred in 17 of 76 fractures and 13 of 84 dislocations. However, no iatrogenic rotator cuff injury was verified by magnetic resonance imaging in patients with PSS or PSE. Subacromial erosion in patients with hook plate fixation should be considered a sequela and not a complication because it is unavoidable in surgery with an AO-type hook plate. The most common complication was PSS, followed by PSE.

Os acromiale may be a contraindication of the clavicle hook plate: case reports and literature review

Background

Os acromiale can be potentially missed or misdiagnosed as acromion fracture, and this can affect treatment determination if it is complicated with an ipsilateral shoulder injury. The clavicle hook plate is a widely used technique for distal clavicle injuries, leading to transacromial erosion, particularly when in the presence of os acromiale.

Case presentation

A 70-year-old man and a 78-year-old man who had limited mobility and severe pain in their right shoulders following falls attended the emergency center. Both patients were diagnosed with os acromiale with CT or MRI and acute distal clavicle fracture or acromioclavicular joint dislocation. Following a comprehensive evaluation, os acromiale may limit the application of a clavicle hook plate due to potential transacromial erosion. The distal clavicle fracture with ipsilateral os acromiale received treatment with a volar radius locking T plate, and the acromioclavicular joint dislocation with ipsilateral os acromiale was reconstructed using suture anchors. Both yielded satisfactory outcomes and voided transacromial erosion.

Conclusions

Ipsilateral os acromiale may be a relative contraindication to the clavicle hook plate. An axillary lateral radiograph is recommended to detect potential os acromiale in patients using a hook plate.

Long-Term Clinical and Radiological Results After Hook Plate Osteosynthesis of Lateral Clavicle Fractures

OBJECTIVES

To assess both clinical and radiological long-term outcomes after hook plate osteosynthesis for Neer type II lateral clavicle fractures.

DESIGN

Retrospective case series.

SETTING

Level-1 trauma center.

PATIENTS/PARTICIPANTS

Patients who underwent open reduction internal fixation with a hook plate for displaced fractures of the lateral third of the clavicle (Neer type II) at a single trauma hospital were identified.

INTERVENTION

Lateral clavicle open reduction internal fixation with a hook plate.

MAIN OUTCOME MEASURES

At the first of 2 long-term follow-up appointments, bilateral magnetic resonance imaging (MRI) scans and strength measurements were performed, Constant-Murley score, subjective shoulder value (SSV), and Oxford shoulder score (OSS) of both shoulders were obtained. At the second follow-up, specific acromioclavicular (AC) score, SSV, and OSS were obtained.

RESULTS

Twenty-one patients (mean age, 29.5 ± 9.7 years) could be included who were available for at least 1 of 2 follow-ups after 7.4 years (±2.3) and 13.9 years (±2.2). Bony union was achieved in all patients (100%) at an average of 3.4 months (±1.4). The hook plate was removed at an average of 5.5 months (±3.3) after initial surgery in all patients. No significant side-to-side differences were found in OSS, Constant-Murley score, SSV, and specific AC score and for strength testing and MRI scans.

CONCLUSIONS

Long-term outcome after hook plate fixation of Neer type II lateral clavicle fractures demonstrated good clinical results and shoulder strength without higher radiographic rates of AC joint osteoarthritis, subacromial impingement, or rotator cuff lesions. That may be related to a standardized early plate removal after bony fracture union.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Clinical outcomes of a combined osteoligamentous reconstruction technique of Neer Type IIB distal clavicle fractures

Purpose

To evaluate outcomes for a combined osteoligamentous reconstruction technique for Neer Type IIB clavicle fractures.

Methods

Patients with Neer Type IIB clavicle fractures treated with combined clavicular locking plate and coracoclavicular ligament suture reconstruction were identified. Demographics, clinical outcomes, and radiographic outcomes were collected.

Results

Twenty-four patients with mean 13 months of follow-up were included. Bony union and normal radiographic coracoclavicular relationship were achieved in 23 (96%) patients. The mean UCLA Shoulder score was 33.3. Three (13%) complications occurred.

Discussion

The combined osteoligamentous reconstruction approach as described is a successful option for treating Neer Type IIB clavicle fractures.

Precontoured Locking Compression Plate with Titanium Alloy Cable System: In Treatment of Neer Type IIb Distal Clavicle Fracture

Objective

To describe a new method which involves anatomical distal clavicle plate fixation and titanium alloy cable system‐augmented coracoclavicular ligament reconstruction to manage Neer type IIb distal clavicle fracture.

Methods

Between January 2013 and June 2018, 28 patients with acute Neer type IIb lateral clavicle fracture were treated by a new method – precontoured locking compressive distal clavicular plate fixation of the fracture combined with titanium alloy cable system‐augmented reconstruction of the coracoclavicular ligament. There were 11 females and 17 males treated in this way. There were 15 cases of the right side and 13 of the left. The mean age of the patients was 48.5 years (range, 18–78 years). The mean time from injury to surgery was 3.9 days (range, 1–7 days). After completing the preoperative examinations and evaluations, surgeries were performed for all these patients, anatomical distal clavicle plates were used for fractures, and titanium alloy cables were implanted for the augmented reconstruction of coracoclavicular ligaments. Postoperative protocols, including arm sling management and rehabilitative activities, were unified and recommended to all the patients. These patients were followed up for at least 1 year. The mean duration of postoperative follow‐up was 23.3 months (range, 12–52 months). At the last follow‐up, the coracoclavicular distances were recorded and shoulder functional outcomes were assessed by the Constant scores and the Fudan University Shoulder Scores (FUSSs) questionnaires.

Results

Radiographic bony unions were achieved in all patients within 20 weeks. Functional and radiographic outcomes were retrospectively evaluated. The mean coracoclavicular distance was 9.61 ± 0.61 mm on the injured side vs 9.62 ± 0.57 mm on the contralateral uninjured side. The mean Constant score and mean FUSS were 90.1 ± 6.6 (range, 68–98) and 86.1 ± 7.2 (range, 64–95) respectively, which indicating good restoration of function and high level of satisfaction for both the patients and their physical therapists. There were a few major complications, including one delayed healing of the skin, one severe shoulder stiffness, three incidences of moderate shoulder stiffness, and five incidences of symptomatic hardware. There is no deep infections, neurovascular injuried, delayed union or nonunion, peri‐implant fracture, loss of reduction, implant malposition or failure, or other severe complications.

Conclusion

This combined method for the treatment of Neer type IIb distal clavicle fracture could yield high bony union rate, good functional outcome, and low complication rate. Further prospective randomized controlled studies are needed to confirm the benefits of this method of treatment.

A Comparison of 3 Fixation Strategies in the Treatment of Neer Type IIB Distal Clavicle Fractures

OBJECTIVES

To compare the stability of NT2B clavicle fractures fixed with either a hook plating (HP), Superior Plating with Suture Augmentation (SPSA), or dual orthogonal plating (DP) with the hypothesis that DP would provide increased multiplanar stability across NT2B fractures.

METHODS

NT2B distal clavicle fractures were created in cadaveric specimens and fixed using (1) HP, (2) SPSA, or (3) DP. Specimens were cyclically loaded in 3 different planes of motion: (1) anteroposterior (AP), (2) superior-inferior, and (3) axial rotation while displacement was continually recorded. Afterward, a superiorly directed load was applied to the clavicle. Load to failure, stiffness, and mode of failure were recorded.

RESULTS

During AP loading, clavicles fixed with a DP had significantly lower mean posterior displacement compared to those fixed with SPSA at every 100-cycle interval of testing, P < 0.01. During inferior-superior loading, specimens fixed with a DP had less superior displacement than specimens fixed with an HP and SPSA, reaching significance at the 500-700 cycles of testing. There was no significant difference in axial rotation stability or load to failure between the 3 fixation techniques.

CONCLUSIONS

Orthogonally placed minifragment plates provide improved stability against anterior displacement with no significant difference in superior stability, axial rotational stability, stiffness, or load to failure. Further clinical studies are needed to confirm the long-term stability of dual plating and determine the risks and benefits of this novel method of distal clavicle fixation.

Current Concepts for Classification and Treatment of Distal Clavicle Fractures

Distal clavicle fractures are less common than mid-shaft fractures in adults and there is no consensus on the best classification system or the ideal treatment approach considering that high nonunion rates have been reported. Although there are numerous treatment options for distal clavicle fractures, a gold standard treatment has not yet been established. Each surgical technique has its pros and cons. In this review article, we provide an overview of classification systems and treatment methods for distal clavicle fractures.

Neer Type-II Distal Clavicle Fractures: A Cost-Effectiveness Analysis of Fixation Techniques

BACKGROUND

Neer type-II distal clavicle fractures are unstable and are generally appropriately managed with operative fixation. Fixation options include locking plates, hook plates, and suture button devices. No consensus on optimal technique exists.

METHODS

A decision tree model was created describing fixation of Neer type-II fractures using hook plates, locking plates, or suture buttons. Outcomes included uneventful healing, symptomatic implant removal, deep infection requiring debridement, and nonunion requiring revision. Weighted averages derived from a systematic review were used for probabilities. Cost-effectiveness was evaluated by calculating incremental cost-effectiveness ratios (ICERs). The ICER is defined as the ratio of the difference in cost and difference in effectiveness of each strategy, and is measured in cost per quality-adjusted life year (QALY). The model was evaluated using thresholds of $50,000/QALY and $100,000/QALY. Sensitivity analysis was performed on all outcome probabilities for each fixation strategy to assess cost-effectiveness across a range of values.

RESULTS

Forty-three papers met final inclusion criteria. Using suture buttons as the reference case in the health-care cost model, suture button repair was dominant (both less expensive and clinically superior). Hook plates cost substantially more ($5,360.52) compared with suture buttons and locking plates ($3,713.50 and $4,007.44, respectively). Suture buttons and locking plates yielded similar clinical outcomes (0.92 and 0.91 QALY, respectively). Suture button dominance persisted in the societal perspective model. Sensitivity analysis on outcome probabilities showed that locking plates became the most cost-effective strategy if the revision rate after their use was lowered to 2.2%, from the overall average in the sources of >19%. No other changes in outcome probabilities for any of the 3 techniques allowed suture buttons to be surpassed as the most cost-effective.

CONCLUSIONS

The cost-effectiveness of suture buttons is driven by low revision rates and high uneventful healing rates. Similar QALY values for locking plate and suture button fixation were observed, which is consistent with existing literature that has failed to identify either as the clinically superior technique. Cost-effectiveness should fit prominently into the decision-making rubric for these injuries.

LEVEL OF EVIDENCE

Economic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Open Reduction and Tunneled Suspensory Device Fixation of Displaced Lateral-End Clavicular Fractures: Medium-Term Outcomes and Complications After Treatment

BACKGROUND

Fractures of the lateral aspect of the clavicle with complete displacement have a high nonunion rate and are associated with poor functional outcomes following nonoperative treatment. Various techniques are available to treat these fractures, but preliminary studies of open reduction and tunneled suspensory device (ORTSD) fixation have shown good early functional outcomes with a low rate of complications; our goal was to assess the functional outcomes and complications in the medium term in a larger series of patients treated using this technique.

METHODS

Sixty-seven patients with displaced lateral-end clavicular fractures were treated with ORTSD fixation. Outcome was assessed with the Disabilities of the Arm, Shoulder and Hand (DASH) questionnaire and the Oxford shoulder score at 6 weeks and 3, 6, and 12 months postoperatively. Fifty-five of 64 surviving patients were subsequently contacted at a mean of 69 months (range, 27 to 120 months) postoperatively to complete DASH and Oxford shoulder scores, to evaluate their overall level of satisfaction, and to document any further complications.

RESULTS

At 1 year postoperatively, the mean Oxford shoulder score was 46.4 points and the mean DASH score was 2.4 points in 59 of the 67 patients assessed at this time interval. At the later follow-up (mean, 69 months), the mean Oxford shoulder score was 46.5 points and the mean DASH score was 2.2 points in the 55 surviving patients who were able to be contacted. There were no significant differences between the 1-year functional scores and those at the latest follow-up. Two patients developed a symptomatic nonunion requiring reoperation, and 2 patients developed an asymptomatic fibrous union not requiring a surgical procedure. The 5-year survival when considering only obligatory revision for implant-related complications was 97.0%.

CONCLUSIONS

ORTSD fixation for isolated displaced lateral-end clavicular fractures in medically fit patients is associated with good functional outcomes and a low rate of complications in the medium term. Routine implant removal was not necessary.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

A biomechanical comparison of two plating techniques in lateral clavicle fractures

BACKGROUND

Neer Type IIb lateral clavicle fractures typically lead to dislocation of the medial fragment. Therefore, most surgeons recommend surgical treatment for such a fracture pattern. The use of a locking compression plate with a lateral extension has produced satisfactory results in various studies over recent years. Double-plate fixation is a common technique in the treatment of complex distal radius fractures. The authors use this technique as a routine procedure in the treatment of Neer type IIb fractures. In this biomechanical testing study, the mechanical properties of the two techniques were compared.

METHODS

On 20 clavicles from fresh frozen cadavers a Neer Type IIb fracture-like osteotomy was performed. A cyclic loading test followed by a load-to-failure test was carried out. Parameters for statistical evaluation were the stiffness at cycles 1, 100 and 17,500 as well as the ultimate tensile load and the deformation at the point of failure.

FINDINGS

All specimens withstood the cyclic loading test without any noticeable damage. At cycles 100 and 17,500, the double-plate technique was less stiff. Failure loads were not significantly different from each other, but deformation at the point of failure was significantly greater for the double-plate technique.

INTERPRETATION

Both techniques provided sufficient fixation to the fracture site to endure the cyclic loading test, which is supposed to simulate an incident-free week postoperatively. In summary, the double-plate technique offers biomechanically a feasible alternative to the single-plate technique in lateral clavicle fractures of Neer Type IIb.

Outcomes and function of conoid ligament on the basis of postoperative radiographic findings of arthroscopic stabilization for the distal clavicle fractures

PURPOSE

Distal clavicle fractures are divided into three types according to Neer's classification. These fractures are usually treated with a sling to immobilize the upper extremity, however, the treatment of type 2 fractures remain controversial. We focused on the anatomical basis of these fractures in which disruptions in the conoid ligament led to the distraction between the two bony fragments. In this study, we report an arthroscopic procedure for conoid ligament reconstruction and its therapeutic outcomes, and discuss the function of the reconstructed conoid ligament.

HYPOTHESIS

Arthroscopic conoid ligament reconstruction alone is sufficient to retain the posteriorly displaced proximal fragment of the clavicle in its reduced position.

MATERIALS AND METHODS

A retrospective cohort study were conducted on 18 patients with type 2 distal clavicle fractures. Arthroscopic techniques were performed with the patients in the beach chair position. Dacron artificial ligament^® was used to reconstruct the conoid ligament, and the internal bone fixation materials included an EndoButton^® on the coracoid process side and a screw with a spiked washer on the clavicle side. Preoperative assessment was performed via plain radiography or three-dimensional computed tomography to evaluate the displacement of the proximal fragment. Although the displacement was superoposterior in all the cases, the acromioclavicular joint was maintained. The mean duration of postoperative follow-up was 2 years and 5 months.

RESULT

There were no injury-related complications during the surgery and bony union was achieved within 3 months after surgery. Evaluation using 3DCT also showed that the preoperative superoposterior displacement of the proximal fragment of the clavicle was immediately reduced postoperatively, and this reduced position was maintained until the final follow-up examination.

CONCLUSIONS

We achieved good results by indirectly reducing fractures of the distal clavicle with conoid ligament damage using the minimally invasive surgical technique of arthroscopic conoid ligament reconstruction. Anatomical reconstruction of the conoid ligament might stabilize not only the superior displacement of the displaced proximal fragment of the clavicle but also its posterior displacement.

STUDY DESIGN

Case series with no comparison study.

LEVEL OF EVIDENCE

4, retrospective cohort study.

Fifteen-degree clavicular hook plate achieves better clinical outcomes in the treatment of acromioclavicular joint dislocation

OBJECTIVE

Clavicular hook plate application is one of the most commonly used treatment methods for acromioclavicular (AC) joint dislocation, although it may cause multiple postoperative complications. We modified the regularly used 0° hook plate to 15° and compared the clinical outcomes of these two hook plates for treatment of AC joint dislocation.

METHODS

Forty-three patients with acute AC joint dislocation were randomly enrolled (0° hook plate, 20 patients; 15° hook plate, 23 patients). The American Shoulder and Elbow Surgeons (ASES) and visual analog scale for pain (VASP) scores were evaluated preoperatively and at 3 days and 1, 2, 3, and 6 months postoperatively and compared between the two groups.

RESULTS

Compared with the preoperative scores, the 6-month postoperative ASES score gradually increased but the VASP score decreased in both groups. Furthermore, the ASES and VASP scores were significantly different between the two groups at every postoperative time point.

CONCLUSION

The 15° hook plate is superior to the 0° hook plate in reducing shoulder pain and improving postoperative recovery in the treatment of AC joint dislocation.

LEVEL OF EVIDENCE

Level III; Treatment study (retrospective comparative study).

Arthroscopy-assisted Treatment of Displaced Distal Clavicle Fractures Utilizing Curved Buttons and Suture Tape With a Single Coracoclavicular Tunnel

BACKGROUND

Distal third clavicle fractures are associated with high rates of nonunion. Acceptable healing rates have been reported; however, complications and the need for additional procedures are a concern. The purpose of this study was to evaluate the functional outcomes and healing rates of an arthroscopy-assisted technique for fixation of unstable distal third clavicle fractures.

METHODS

Seven patients presenting to a single surgeon with displaced distal clavicle fractures were included. A curved suspensory button and suture tape construct with a single coracoclavicular tunnel was used. Visual Analog Scale, American Shoulder and Elbow Surgeons scores, Simple Shoulder Test, and Subjective Shoulder Value scores were analyzed preoperatively and at final follow-up. Radiographic evidence of union, maintenance of reduction and complications were recorded. All patients were available for 1-year follow-up.

RESULTS

Mean Visual Analog Scale pain score improved from 6.1±1.1 to 1.1±1.0 (P=0.022). American Shoulder and Elbow Surgeons scores increased from 40.3±17.2 to 86.7±13.7 (P≤0.001). The mean Simple Shoulder Test score increased from 2.7±1.1 to 11.0±1.8 (P≤0.001). The Subjective Shoulder Value improved from 41.6±19.1 to 91.4±7.6 (P=0.210). Fracture united in 6 of 7 patients and reduction was maintained in all patients. Six patients were satisfied and returned to previous activity level.

CONCLUSIONS

Arthroscopy-assisted fixation of unstable displaced distal clavicle fractures demonstrates improved functional outcomes and high patient satisfaction. This construct avoids many of the previously reported complications associated with other methods of fixation, while minimizing the amount of soft tissue dissection.

Distal Clavicle Fractures: Open Reduction and Internal Fixation With a Hook Plate

Displaced distal clavicle fractures pose unique challenges because of their propensity for instability. In particular, type II fracture patterns are associated with high rates of nonunion with nonoperative management; therefore, surgical fixation is often recommended. Hook plate fixation has demonstrated reliably high rates of osseous union with good functional outcomes. We present our surgical technique and rationale for using a hook plate in the setting of an unstable distal clavicle fracture.

Are Hook Plate Complications Inevitable?

No abstract available.

Clinical and Radiological Results of Hook Plate Fixation in Acute Acromioclavicular Joint Dislocations and Distal Clavicle Fractures

Background

The purpose of this study was to evaluate the clinical outcomes and complications of hook plate fixation in acromioclavicular (AC) joint dislocations and distal clavicle fractures.

Methods

We retrospectively reviewed a series of 60 consecutive patients with hook plate fixation for AC joint dislocation (group I) and distal clavicle fracture (group II). Groups I and II had 39 and 21 patients, respectively. Clinical results were evaluated using the pain visual analogue scale (VAS), simple shoulder test, and Constant-Murley scores. In addition, subacromial erosion and stiffness were evaluated as complications.

Results

At the removal, the pain VAS was 2.69 ± 1.30 and 4.10 ± 2.14 in groups I and II, respectively, which were significantly different (p=0.003). The simple shoulder test score was 9.59 ± 1.60 and 7.81 ± 2.67 in groups I and II, respectively, which were also significantly different (p=0.002). Subacromial erosion was significantly more frequent in group II (14/21 patients, 66.7%) than in group I (15/39 patients, 38.5%) (p=0.037), and stiffness was also higher in group II (17/21 patients, 81.0%) than in group I (22/39 patients, 56.4%), but it was not significant.

Conclusions

Hook plate fixation showed good clinical and functional results for the treatment of acute unstable AC joint dislocation and distal clavicle fracture. But, in distal clavicle fractures, there are more subacromial erosion and stiffness compare with acute unstable AC joint dislocation.

Comparison of Treatment of Acute Unstable Distal Clavicle Fractures Using Anatomical Locking Plates with Versus without Additional Suture Anchor Fixation

Background

Surgical managements were recommended for unstable distal clavicle fracture owing to the high incidence of nonunion. The present study compared the efficacy of anatomical locking plate with versus without additional suture anchor fixation for the treatment of unstable Neer type II distal clavicle fractures.

Material/Methods

Between January 2013 to January 2015, 28 consecutive patients with unstable Neer type II fractures were treated by using anatomical locking plate with or without additional suture anchor fixation. The patients were divided into anatomical locking plate group (group A) and anatomical locking plate combined with suture anchor group (group B) according to the surgical method. The operative-related parameters such as operation time, blood loss, length of hospitalization, union time, functional outcomes (Constant score, UCLA score and DASH score) and CC distance were compared.

Results

The mean follow-up period of the 28 patients was 19.60 months (21.80 versus 18.39 months, respectively). No statistical differences in general and peri-operative parameters were found between 2 groups. The group B had significant higher Constant score than group A (P=0.004, 91.67 versus 83.10). While no statistical differences were reached in the UCLA score and DASH score between 2 groups (P=0.112 and 0.163, respectively). The group A had longer CC distance than group B (11.67 versus 8.94 mm), while no statistic difference was found (P=0.067).

Conclusions

For the treatment of acute unstable Neer type II distal clavicle fractures, both surgical methods could offer satisfactory outcome. However, anatomical locking plate combined with additional suture anchor fixation had a better functional and radiographic outcome than that without additional suture anchor fixation.

Treatment of Unstable Distal Clavicle Fractures With Multiple Steinmann Pins-A Modification of Neer's Method: A Series of 56 Consecutive Cases

OBJECTIVES

To introduce an alternative fixation technique for Neer type II fractures using Steinmann pins (S-pins).

DESIGN

Retrospective case series study.

SETTING

Operating room followed by clinic in tertiary hospital.

PATIENTS/PARTICIPANTS

Between 2001 and 2013, among 66 consecutive patients diagnosed with Neer type II distal clavicle fractures, 11 patients were excluded and 56 clavicles of 55 patients who underwent surgical treatment with multiple transacromial S-pins were selected for analysis.

INTERVENTION

Multiple transacromial S-pin (2.0-mm diameter) fixation was performed. Interfragmentary fixation was performed with 2.7-mm screws in case of oblique fractures.

MAIN OUTCOME MEASURES

Radiographic results, complications, and clinical outcomes including the Constant-Murley score, the University of California at Los Angeles Shoulder score, and the disabilities of the arm, shoulder, and hand score were evaluated.

RESULTS

Radiologic union was achieved in all patients. Coracoclavicular distance was increased by 6.4% compared with that of the uninjured side (P < 0.001). Fourteen patients had lateral migrations of 1 pin (mean migration distance, 11.6 mm). The mean Constant-Murley score was 94.3 (range, 85-100), mean University of California at Los Angeles score was 33.1 (range, 29-35), and mean disabilities of the arm, shoulder, and hand score was 2.7 (range, 0-8.3). The average follow-up period was 30.5 months (range, 24-81 months).

CONCLUSIONS

Good functional and radiologic results were achieved by the insertion of multiple transacromial S-pins with interfragmentary screw fixation. With its wide indication and relatively simple procedure, this technique may be a possible surgical option for the treatment of Neer type II distal clavicle fractures.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Clavicle hook plate fixation for distal-third clavicle fracture (Neer type II): comparison of clinical and radiologic outcomes between Neer types IIA and IIB

BACKGROUND

The purpose of this study was to investigate clinical and radiologic outcomes of clavicle hook plate fixation for distal-third clavicle fracture (Neer type II) and to compare the clinical and radiologic outcomes and complications between Neer type IIA and type IIB.

METHODS

We retrospectively reviewed 35 patients who underwent open reduction and internal fixation with AO hook locking compression plate (LCP) for distal clavicle fracture, including 13 patients with Neer type IIA and 22 patients with type IIB. Visual analog scale pain score, shoulder scores (subjective shoulder value, University of California-Los Angeles shoulder score, American Shoulder and Elbow Surgeons score), and active range of motion were evaluated to determine clinical outcome. Coracoclavicular distance was measured, and that of the injured side at last follow-up was compared with that of the uninjured side to evaluate radiologic outcomes.

RESULTS

AO hook LCP fixation for distal-third clavicle fracture (Neer type II) produced satisfactory radiologic outcomes, including high union rates (100%) and coracoclavicular distance maintenance, as well as satisfactory clinical outcomes, including visual analog scale score for pain, shoulder scores (subjective shoulder value, University of California-Los Angeles shoulder score, American Shoulder and Elbow Surgeons score), and active range of motion. There were no significant differences between Neer type IIA and type IIB. With regard to complications, 22.9% of patients experienced shoulder stiffness and 17.1% had subacromial erosion; however, there were no significant differences between the 2 groups.

CONCLUSION

The AO hook LCP is a suitable choice for Neer type IIA and type IIB distal-third clavicle fracture fixation.

Innovative use of single-incision internal fixation of distal clavicle fractures augmented with coracoclavicular stabilisation

INTRODUCTION

The management of displaced fractures of the distal clavicle remains controversial, particularly in younger patients where there is no consensus as to which surgical intervention is best. Each surgical method has unique surgical complications and rates of persistent pain and post-traumatic arthritis. We report an innovative surgical technique using a plate fixation augmented with minimally invasive tension slide coracoclavicular fixation using a cortical tenodesis button (8.5 mm).

METHODS

A single-surgeon series, comprising of eleven cases, underwent retrospective review. A low-profile pre-contoured stainless steel plate that combines locking and non-locking options was used. Secondary fixation to the coracoid, through the plate, was achieved under fluoroscopic guidance eliminating the need for arthroscopy or exposure of the coracoid. An 8.5-mm cortical button loaded with a single FiberTape is inserted with fluoroscopic navigation, flipped under the coracoid and fixed to the plate. Patients followed a standardised rehabilitation protocol and clinical review assessing time to union, complications and Oxford Shoulder Scores.

RESULTS

The mean age of the patients was 40 years, 82% male. The majority were day-case admissions with a mean follow-up of 18 months. Although a single patient requested plate removal due to lateral prominance, there were no revisions for implant failure and no surgical site infections or neurovascular injuries. All patients were reviewed at a minimum of 17 weeks and were progressing to union. Mean Oxford Shoulder Score was 43 (28-48, SD 6.5).

CONCLUSION

We consider this technique ideal for treating Neer type II distal clavicle fractures or fractures that have poor bone quality laterally, in which it can be difficult to achieve adequate screw fixation. The technique benefits from smaller tunnel diameter (3.7-mm spade-tip drill) and button length (8.5 mm). The procedure has a short learning curve and is both safe and time efficient.

LEVEL OF EVIDENCE

IV.

Coracoclavicular stabilization using a suture button device for Neer type IIB lateral clavicle fractures

BACKGROUND

The purpose of this study was to evaluate the radiologic and clinical outcomes of coracoclavicular (CC) stabilization using a suture button device for Neer type IIB lateral clavicle fractures.

METHODS

Eighteen consecutive patients with Neer type IIB fractures were treated with CC stabilization using a TightRope device (Arthrex, Naples, FL, USA). The mean follow-up period was 46.6 months (range, 24-75 months). Radiologic outcomes were assessed using serial plain radiographs. Clinical outcomes were evaluated using the visual analog scale pain score; University of California, Los Angeles score; American Shoulder and Elbow Surgeons score; and subjective shoulder value. Intraoperative and postoperative complications were also evaluated.

RESULTS

Of the 18 cases, 17 (94.4%) showed complete bony union. The mean final visual analog scale pain score was 1.1; University of California, Los Angeles score, 31.3; American Shoulder and Elbow Surgeons score, 88.6; and subjective shoulder value, 88.5%. Four complications were observed: (1) intraoperative coracoid process fracture, (2) nonunion, (3) delayed union, and (4) shoulder stiffness. The case with a coracoid process fracture during coracoid tunnel generation was converted to the K-wire tension band technique.

CONCLUSION

CC stabilization using a suture button device for Neer type IIB lateral clavicle fractures yielded satisfactory radiologic and clinical outcomes. The major advantage of this technique is that implant removal is not required.

Comparative analysis of locking plate versus hook plate osteosynthesis of Neer type IIB lateral clavicle fractures

INTRODUCTION

Controversy exists on optimal operative treatment of vertically unstable Neer IIB lateral clavicle fractures. Aim of this study was to analyse and compare clinical and radiological results and complications of locking plate osteosynthesis (LPO) versus hook plate osteosynthesis (HPO) with acromioclavicular joint (ACJ) stabilization. The hypothesis was, that HPO would recreate coracoclavicular stability more effectively and potentially lead to a superior outcome.

METHODS

This retrospective, observational cohort study included 32 patients (19 HPO, 13 LPO) with a mean age of 44.1 ± 14.2 years at surgery. The mean follow-up period was 54.2 months (range 25.2-111.4 months). Besides standard radiography, bilateral coracoclavicular distances were assessed by means of preoperative and follow-up stress radiographs after implant removal. Clinical outcome measures included the Constant score (CS), the Oxford shoulder score (OSS), the subjective shoulder value (SSV) and the Taft score (TS).

RESULTS

Bone union occurred in all but one patient and proved to occur delayed in five patients (15.6%). Radiographical healing required a mean of 4.2 ± 4.0 months irrespective of the type of osteosynthesis. At follow-up, mean coracoclavicular distance was increased by 34% (±36) without significant differences between both groups. HPO patients obtained a significantly lower TS (HPO: 9.5 ± 1.5 points, LPO: 11.1 ± 1.3 points; p = 0.005). Other mean score values did not differ (CS: 90.1 ± 7.4 points, OSS: 43.2 ± 9.2 points, SSV: 91.1 ± 14.7%). Sixteen patients (50.0%) experienced complications. Overall prevalence of complications was significantly higher in the HPO group (p = 0.014).

CONCLUSIONS

Both HPO and LPO were equally effective in relation to restoration of vertical stability, overall functional outcome and fracture consolidation in treatment of Neer IIB fractures. Contrary to our hypothesis, HPO was not associated with superior recreation of the coracoclavicular distance. Considerable drawbacks of HPO were an inferior ACJ-specific outcome (Taft-Score) and a higher overall complication rate. Level of evidence IV.

Minimally Invasive Double-Button Fixation of Displaced Lateral Clavicular Fractures in Athletes

BACKGROUND

Early union and a rapid return to prior function are the priorities for young athletes with lateral clavicular fractures. Furthermore, it is essential to avoid nonunion in this subgroup of patients, as this is frequently associated with persistent pain, restriction of movement, and loss of strength and endurance of the shoulder.

PURPOSE

To analyze the time to return to sport, functional outcomes, and complications in a group of athletes with displaced lateral clavicular fractures treated using closed reduction and minimally invasive double-button fixation.

STUDY DESIGN

Case series; Level of evidence, 4.

METHODS

A total of 21 athletes with displaced lateral clavicular fractures were treated with closed reduction and minimally invasive double-button fixation between March 2008 and October 2013. Patients completed a questionnaire focused on the time to return to sport and treatment course. Functional outcomes were assessed with the Constant score and the short version of the Disabilities of the Arm, Shoulder and Hand (QuickDASH) questionnaire. Pain was evaluated with the visual analog scale (VAS). Radiographs were reviewed to identify radiographic union, malunion, and nonunion.

RESULTS

Of the 21 study patients, 20 returned to sport after treatment; 100% returned to the same level. The mean time to return to play was 78 days (range, 41-120 days). Four patients (20%) returned to sport less than 6 weeks after surgery, 14 (70%) returned between 6 and 12 weeks after surgery, and 2 (10%) returned after 12 weeks. The mean Constant score was 89.1 ± 4.2 (range, 79-100), the mean QuickDASH score was 0.4 ± 2.6 (range, 0-7.1), and the mean VAS pain score was 0.4 ± 1.0 (range, 0-3) at final follow-up (mean, 41 months). The only complication was asymptomatic nonunion. Hardware removal was not necessary in any patient.

CONCLUSION

Closed reduction and minimally invasive double-button fixation of displaced lateral clavicular fractures in athletes was successful in terms of returning to the previous level of athletic activity regardless of the type of sport, with excellent clinical results and a low rate of complications.

Evaluation of shoulder function in clavicular fracture patients after six surgical procedures based on a network meta-analysis

Purpose Using a network meta-analysis approach, our study aims to develop a ranking of the six surgical procedures, that is, Plate, titanium elastic nail (TEN), tension band wire (TBW), hook plate (HP), reconstruction plate (RP) and Knowles pin, by comparing the post-surgery constant shoulder scores in patients with clavicular fracture (CF). Methods A comprehensive search of electronic scientific literature databases was performed to retrieve publications investigating surgical procedures in CF, with the stringent eligible criteria, and clinical experimental studies of high quality and relevance to our area of interest were selected for network meta-analysis. Statistical analyses were conducted using Stata 12.0. Results A total of 19 studies met our inclusion criteria were eventually enrolled into our network meta-analysis, representing 1164 patients who had undergone surgical procedures for CF (TEN group = 240; Plate group = 164; TBW group  =  180; RP group  =  168; HP group  =  245; Knowles pin group  =  167). The network meta-analysis results revealed that RP significantly improved constant shoulder score in patients with CF when compared with TEN, and the post-operative constant shoulder scores in patients with CF after Plate, TBW, HP, Knowles pin and TEN were similar with no statistically significant differences. The treatment relative ranking of predictive probabilities of constant shoulder scores in patients with CF after surgery revealed the surface under the cumulative ranking curves (SUCRA) value is the highest in RP. Conclusion The current network meta-analysis suggests that RP may be the optimum surgical treatment among six inventions for patients with CF, and it can improve the shoulder score of patients with CF. Implications for Rehabilitation RP improves shoulder joint function after surgical procedure. RP achieves stability with minimal complications after surgery. RP may be the optimum surgical treatment for rehabilitation of patients with CF.

Treatment of distal-third clavicular fractures (Neer type ii-b) with a triple button device

OBJECTIVE

The purpose of this study is to describe the outcomes of using a triple button device for the treatment of displaced distal-third clavicle fractures (Neer, type ii-b).

MATERIAL AND METHOD

A retrospective review was conducted on a series of patients between November 2011 and December 2014. Fourteen patients initially met the inclusion criteria, but 2 were excluded, leaving 12 patients (83.3% male; mean age 32.2 years) for the final analysis at a mean follow-up of 26±11.24 months (range, 12-48). Post-operative follow-up was performed at 2 weeks (two first months), and monthly thereafter, until was achieving clinically and radiological healing. The functional outcome was evaluated using the Constant score, and DASH score in the last follow-up.

RESULTS

The mean Constant Score was 95.5±5.2 points (range, 85-100), with a mean DASH score of 3.3±4.4 points (range, 0-12.5). The mean time to clinical healing was10.3±3.1 weeks (range, 8-16), and the mean time to radiological healing was 13.6±2.6 weeks (range, 12-20). There were no major complications. There were 5 minor complications without clinical impact: 2 coracoclavicular calcifications, 1 hypertrophic scar, 1 patient with discomfort due to the device, and 1 superficial wound infection. All patients returned their previous activity.

CONCLUSION

Good clinical results can be achieved with the triple button device in unstable distal fractures of the clavicle, without the need to remove the hardware.

Clinical and radiological results on the fixation of Neer type 2 distal clavicle fractures with a hook plate

Objective

The aim of this study was to analyze the clinical and functional results of hook plate fixation in Neer type 2 distal clavicle fractures.

Methods

We retrospectively analyzed 16 patients (11 males, 5 females) who were diagnosed with Neer type 2 distal clavicle fractures and treated with hook plate fixation between 2013 and 2014. Mean age was 38 (range: 27–61), and mean follow-up time was 14.3 (range: 12–18) months. Complications seen on radiographs were implant failure and subacromial osteolysis. The clinical results were evaluated with modified UCLA (University of California Los Angeles) scoring system.

Results

Bone union was achieved in all patients at the end of the first 4 months. Mean modified UCLA score was 32.75 (range 31–35). In 12 patients (68%), the implants had to be removed due to complications. After removal, the complaints regressed and shoulders' range of motion increased.

Conclusion

Clinical and radiological results on the fixation of Neer type 2 distal clavicle fractures with a hook plate are good in terms of fracture union and function. The major disadvantage of the method was the requirement of early implant removal due to the hardware related complications and good results can be achieved only after plate removal. Optimizing the length of hook plate may lower the rate of complications.

Level of evidence

Level IV, Therapeutic study.

Does Subacromial Osteolysis Affect Shoulder Function after Clavicle Hook Plating?

Purpose. To evaluate whether subacromial osteolysis, one of the major complications of the clavicle hook plate procedure, affects shoulder function. Methods. We had performed a retrospective study of 72 patients diagnosed with a Neer II lateral clavicle fracture or Degree-III acromioclavicular joint dislocation in our hospital from July 2012 to December 2013. All these patients had undergone surgery with clavicle hook plate and were divided into two groups based on the occurrence of subacromial osteolysis. By using the Constant-Murley at the first follow-up visit after plates removal, we evaluated patients' shoulder function to judge if it has been affected by subacromial osteolysis. Results. We have analyzed clinical data for these 72 patients, which shows that there is no significant difference between group A (39 patients) and group B (33 patients) in age, gender, injury types or side, and shoulder function (the Constant-Murley scores are 93.38 ± 3.56 versus 94.24 ± 3.60, P > 0.05). Conclusion. The occurrence of subacromial osteolysis is not rare, and also it does not significantly affect shoulder function.

In vivo analysis of acromioclavicular joint motion after hook plate fixation using three-dimensional computed tomography

BACKGROUND

The clavicle hook plate can be used to treat acromioclavicular and coracoclavicular ligament injury or distal clavicular fracture with comminution. However, the hook plate can induce subacromial impingement, resulting in discomfort from the hardware.

METHODS

Our inclusion criteria were (1) men and women aged older than 20 years and (2) the presence of comminuted distal clavicular fractures (Neer type IIB) fixed with a hook plate (Synthes, Oberdorf, Switzerland). Three-dimensional computed tomography was obtained before removal of the hook plate. Seven patients were enrolled prospectively. The mean age was 42 years (range, 24-60 years). Zero degree images and abduction images were obtained. The sagittal cut surface was obtained 5 mm medial from the distal clavicle. The equator of the cut surface of the clavicle was compared with the full abduction model to analyze rotation. The center of the cut surface of the clavicle was compared with the full abduction model to analyze translation.

RESULTS

The average difference in rotation of the distal clavicle between both shoulders was 16° (range, 3°-22°; P = .001). The mean difference in anterior translation of the distal clavicle was 2.2 mm (range, -0.7 to 5.6 mm; P = .030).

CONCLUSION

Hook plate fixation at the acromioclavicular joint causes decreased internal rotation and increased anterior translation of the distal clavicle with respect to the medial acromion, indicating that the scapula relative to the thorax has decreased posterior tilting and increased external rotation in shoulders fixed using a hook plate.

Clinical and radiological outcome following treatment of displaced lateral clavicle fractures using a locking compression plate with lateral extension: a prospective study

Background

Treatment of lateral fractures of the clavicle is challenging and has been controversially discussed for a long time due to high non-union rates in non-operative treatment and high complication rates in surgical treatment. Acromioclavicular joint instability due to the injury of the closely neighbored coraco-clavicular ligaments can result in a cranialization of the medial clavicle shaft. A recently developed implant showed a promising functional outcome in a small collective of patients.

Methods

In this prospective study, 20 patients with a mean age of 40.7 ± 11.3 years with a dislocated fracture of the lateral clavicle (Jäger&Breitner I-III, Neer I-III) were enrolled. All patients were surgically treated using the locking compression plate (LCP) for the superior anterior clavicle (Synthes®). Functional outcome was recorded using the Munich Shoulder Questionnaire (MSQ) allowing for qualitative self-assessment of the Shoulder Pain and Disability Index (SPADI), of the Disability of the Arm, Shoulder and Hand (DASH) score and of the Constant Score. Acromioclavicular joint stability was evaluated using the Taft-Score.

Results

The mean follow-up was 14.2 ± 4.0 months. The mean MSQ was 87.0 ± 7.4 points, the mean SPADI 91.1 ± 11.3 points, the mean DASH score 7.6 ± 7.3 points and the mean normative age- and sex-specific Constant Score 85.6 ± 8.0 points. The mean Taft Score resulted in 10.7 ± 1.0 points. The mean Taft Score in lateral clavicular fractures with fracture gap between the coracoclavicular ligaments in combination with a rupture of the conoid ligament (J&B II a, Neer II B; n =11) was with 10.3 ± 0.9 points significantly lower than the mean Taft Score of all other types of lateral clavicle fractures (J&B I, II b, III; n =9) which resulted in 11.3 ± 0.9 points (p < 0.05).

Conclusions

The Synthes® LCP superior anterior clavicle plate allows for a safe stabilization and good functional outcome with high patient satisfaction in fractures of the lateral clavicle. However, in fractures type Jäger&Breitner II a, Neer II B a significant acromioclavicular joint instability was observed and additional reconstruction of the coracoclavicular ligaments should be performed.

Trial registration

ClinicalTrials.gov NCT02256059. Registered 02 October 2014.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2474-15-380) contains supplementary material, which is available to authorized users.

Arthroscopic evaluation for omalgia patients undergoing the clavicular hook plate fixation of distal clavicle fractures

BACKGROUND

The aim of this study is to investigate the anatomic changes in the shoulder joints responsible for omalgia after the clavicular hook plate fixation under arthroscope.

METHODS

Arthroscopic examination was carried out for 12 omalgia patients who underwent clavicular hook plate fixation due to distal clavicle fractures. Functional outcome of shoulder was measured by the Japanese Orthopaedic Association (JOA) score before and after the withdrawal of the fixation plate.

RESULTS

The rotator cuff compression by the clavicular hook was arthroscopically observed in 11 of the 12 cases. The JOA scores of the shoulder were significantly improved at 1 month after the withdrawal of the fixation plate (pain, 28 ± 2.4 vs. 15 ± 5.2; function, 19.2 ± 1.0 vs. 11.7 ± 1.9; range of movements, 26.8 ± 2.6 vs. 14.8 ± 3.4) compared with before.

CONCLUSIONS

The impingement of the hook to the rotator cuff may be the main cause for the omalgia. The appropriate hook and plate that fit to the curve of the clavicle as well as the acromion are necessary to decrease the severity of omalgia.

Fracture of distal end clavicle: A review

Management of fracture distal end clavicle has always puzzled the orthopaedic surgeons. Now-a-days with a relatively active lifestyle, patients want better results both cosmetically and functionally. Despite so much literature available for the management of this common fracture, there is no consensus regarding the gold standard treatment for this fracture. In this article, we reviewed the literature on various techniques of management for this fracture, both conservative as well as surgical, and their merits and demerits.