The effect of scapular position on subacromial contact behavior: a cadaver study

Origami-Inspired Conductive Paper-Based Folded Pressure Sensor with Interconnection Scaling at the Crease for Novel Wearable Applications

Drawing inspiration from origami structures, a pressure sensor was developed with unique interconnection scaling at its creases crafted on a conductive paper substrate, paving the way for advanced wearable technology. Two screen-printed conductive paper substrates were combined face-to-face, and specific folds were introduced to optimize the sensor structure. The Electrical Contact Resistance (ECR) was systematically analyzed across different fold numbers and crease gaps, revealing a notable trade-off: while increasing the number of folds expanded the sensing area, it also influenced the ECR, reaching a performance plateau. Strategic modifications in the sensor's design, including refining interconnections at the crease, enhanced its sensitivity and stability, culminating in a remarkable sensitivity of 3.75 kPa-1 at subtle pressure levels (0-0.05 kPa). This sensor's real-world applications proved to be transformative, from detecting bruxism and aiding in neck posture correction to remotely sensing trigger finger locking phenomena, highlighting its potential as a pivotal tool in upcoming medical diagnostics and treatments.

The relationship between scapular position and glenohumeral rotational range of motion in high school baseball players

BACKGROUND

Past research indicated that scapular malposition is related to the glenohumeral internal rotation deficit (GIRD). However, there is no research examining the effect of throwing-related pain on this relationship. This study investigated the relationship between scapular position and range of motion (ROM) and compared the difference in this relationship between with and without throwing-related pain.

METHODS

Forty male baseball players in high school were recruited for this study. The existence and degree of throwing-related pain were obtained from a questionnaire. Participants were divided into 2 groups according to the presence or absence of the pain. Glenohumeral internal and external rotation ROM (abduction internal rotation angle and abduction external rotation angle [ABER], respectively) were measured using a digital inclinometer. The pectoralis minor muscle length was measured using a vernier caliper and scapula index, which indicated the scapular position, measured using a measuring tape. All these measurements were taken on both dominant and nondominant sides. The GIRD and total motion arc (TMA) deficit were calculated from the ROM measurements. Groups were compared using a mixed-model analysis of variance.

RESULTS

There was a significant interaction between group and ABER dominance. Other variables were not seen as the interaction effect. There was a significant positive correlation between the scapula index and TMA (r = 0.47, P = .02) and a negative correlation between the scapula index and GIRD (r = -0.65, P < .01) in the dominant side of the pain group. In addition, in the nondominant side of the pain group, the scapula index and ABER were significantly correlated (r = 0.43, P = .04).

CONCLUSIONS

The results of this study indicate that the scapular position is associated with the glenohumeral ROM in high school baseball players. In addition, this study demonstrated that the scapular internally rotated position was correlated with the GIRD and TMA deficit in high school baseball players who had throwing-related pain. On the other hand, the scapular externally rotated position was correlated with increased ABER, mainly in the pain-free baseball players or on the nondominant side. These results indicated that the scapular position might affect the glenohumeral rotational ROM in high school baseball players.

A design tool to estimate maximum acceptable manual arm forces for above-shoulder work

There is a need for design criteria for above-shoulder work to prevent shoulder fatigue and supraspinatus injuries. A tool is developed to estimate maximum acceptable manual arm forces for above-shoulder work based on 25th % female strength with adjustments for supraspinatus tendon impingement and shoulder fatigue. The tool equations are presented along with tables of maximum acceptable manual arm forces in 77 locations in the 3 D space above the shoulder that accommodates a 50th % female reach. The largest acceptable anterior force, 140.3 N, occurs at shoulder height, 0.5 m anterior to the shoulder. The largest acceptable superior force, 84.4 N, occurs at shoulder height, 0.1 m anterior and 0.2 m medial to the shoulder. The new tool provides design criteria for arm exertions at a higher level of detail than prior ergonomic tools, making it useful for engineers. Based on sensitivity analyses, the tool is robust to parameter assumptions. Practitioner summary: Above-shoulder work is associated with increased risk for shoulder fatigue and injuries. A new tool is developed that estimates maximum acceptable manual arm forces for work at or above shoulder height. The tool can be used to design acceptable above-shoulder work so that it can be accomplished by most workers. Abbreviations: AFF: arm force field; AP: anterior/posterior; DC: duty cycle; GH: glenohumeral angle; HT: humerothoracic angle; LM: lateral/medial; MAE: maximum acceptable effort; MAF: maximum acceptable force; MAS: manual arm strength; MVC: maximum voluntary contraction; N: newton; OCRA: occupational repetitive action; R: reach distance; RMS: root means square; RULA: rapid upper limb assessment; SF: scale factor; SI: superior/inferior; ST: scapulothoracic angle; T: thoracicKEY POINTSA new design tool is introduced that estimates maximum acceptable hand forces for specific locations above the shoulder.This above-shoulder tool is based on a 50th percentile female anthropometry and 25th percentile female manual arm strength.These base strengths are multiplied by scaling factors that adjust for subacromial impingement and fatigue.The tool was shown to be robust based on sensitivity analysis.

Differences in scapular motion and parascapular muscle activities among patients with symptomatic and asymptomatic rotator cuff tears, and healthy individuals

Background

Altered scapular motion is thought to be one of the factors associated with the development of symptomatic rotator cuff tears. However, the differences in kinematics and muscle activities of scapular upward/downward rotation between patients with symptomatic and asymptomatic tears are unclear. The purpose of this study was to compare the differences in kinematics and muscle activities of scapular rotation among patients with symptomatic and asymptomatic tears, and healthy individuals.

Methods

Twenty-three patients with rotator cuff tears and 9 healthy individuals (healthy group) participated in this study. Based on a visual analog scale (VAS, 0-100 mm), the patients were divided into symptomatic (13 patients; VAS ≥20 mm) and asymptomatic (10 patients; VAS <20 mm) groups. Scapular upward rotation was measured with a digital inclinometer. Elasticities of the upper trapezius, levator scapulae, and rhomboid major were assessed by using ultrasound real-time tissue elastography to quantify their muscle activities. All measurements were performed at 0°, 60°, 90°, and 120° of active arm elevation in the scapular plane.

Results

Scapular upward rotation was significantly less in the symptomatic group (9.4° ± 5.6°) compared with the asymptomatic group (15.7° ± 6.0°; P = .022) at 90° of arm elevation. The activity of the levator scapulae was significantly higher in the symptomatic group compared with the asymptomatic and healthy groups (P = .013 and P = .005, respectively) at 90° of arm elevation. The activity of the upper trapezius was significantly higher in the symptomatic group compared with the healthy group (P = .015) at 120° of arm elevation.

Conclusion

Patients with symptomatic rotator cuff tears showed less scapular upward rotation and higher activity of the levator scapulae at 90° of arm elevation compared to patients with asymptomatic rotator cuff tears.

Shoulder kinematics impact subacromial proximities: a review of the literature

BACKGROUND

Alterations in glenohumeral and scapulothoracic kinematics have been theorized to contribute to rotator cuff pathology by impacting the magnitude of the subacromial space.

OBJECTIVE

The purpose of this review is to summarize what is currently known about the relationship between shoulder kinematics and subacromial proximities.

CONCLUSIONS

A variety of methods have been used to quantify subacromial proximities including photographs, MR imaging, ultrasonography, and single- and bi-plane radiographs. Changes in glenohumeral and scapulothoracic kinematics are associated with changes in subacromial proximities. However, the magnitude and direction of a particular motion's impact on subacromial proximities often vary between studies, which likely reflects different methodologies and subject populations. Glenohumeral elevation angle has been consistently found to impact subacromial proximities. Plane of humeral elevation also impacts subacromial proximities but to a lesser degree than the elevation angle. The impact of decreased scapulothoracic upward rotation on subacromial proximities is not absolute, but instead depends on the angle of humerothoracic elevation. The effects of scapular dyskinesis and humeral and scapular axial rotations on subacromial proximities are less clear. Future research is needed to further investigate the relationship between kinematics and subacromial proximities using more homogenous groups, determine the extent to which compression and other factors contribute to rotator cuff pathology, and develop accurate and reliable clinical measures of shoulder motion.