Development, stability and in vitro delivery profile of new loratadine-loaded nanoparticles

Cytotoxicity, anti-inflammatory effect, and acute oral toxicity of a novel Attalea phalerata kernel oil-loaded nanocapsules

The kernel oil of the Attalea phalerata Mart. Ex Spreng (Acurí) is traditionally used in several Latin American countries to treat respiratory problems, inflammation, and fever. However, it cannot be found on the literature any attend to use this oil in pharmaceutical formulation. In this paper, it was developed Acurí oil-loaded nanocapsules, and it was evaluated the cytotoxicity against cancer cells, the antinflammatory activity and the oral acute toxicity in rats. Acurí oil contains lauric acid as the predominant saturated fatty acid (433.26 mg/g) and oleic acid as the main unsaturated fatty acid (180.06 mg/g). The Acurí oil-loaded nanocapsules showed a size of 237 nm, a polydispersity index of 0.260, and a high ζ-potential of -78.75 mV. It was obtained an encapsulation efficiency of 88.77%, and the nanocapsules remain stable on the shelf for 180 days. The nanocapsules showed a rapid release profile (98.25% in 40 minutes). Nanocapsules at a dose of 10 mg/kg exhibit an anti-inflammatory effect similar to indomethacin at the same dose. The nanocapsules showed excellent antiproliferative effect and selectivity index against prostate tumor cells (IC50 2.09 µg/mL, SI=119.61) and kidney tumor cells (IC50 3.03 µg/mL, SI=82.50). Both Acurí oil and Acurí oil-loaded nanocapsules are nontoxic at a dose of 2000 mg/kg. Additionally, they reduce serum triglyceride and total cholesterol levels in rat and could find application in nutraceutical formulations. The Acurí oil-loaded nanocapsules emerge as a promising candidate for new antitumor therapies.

Assessment of nano lipid carrier loaded transdermal patch of rizatriptan benzoate

BACKGROUND

Migraine is a neurological disorder and is accompanied by different painful episodes. Hence the maintenance of a steady-state concentration of drug can be beneficial for the patients suffering with migraine. The present investigation focuses on the development of nano lipid carriers (NLCs) loaded transdermal patch of rizatriptan benzoate to sustain the effect of the drug for the enhancement of therapeutic effects.

METHOD

Stearic acid and peanut oil were used to make the NLCs. A central composite design was employed to observe the effect of formulation factors like solid lipid ratio, phase volume ratio, and concentration of surfactants on the formation of nanoparticles. The effects were evaluated for the responses like particle size and entrapment of the drug in the nanocarriers. The optimized formulation was subjected to compatibility, thermal, surface characteristics, and surface morphology studies. The optimized formulation was dispersed in HPMC 15CPS and PVP K30 polymer matrix and the transdermal patch was evaluated for its mechanical properties, drug release study, and skin irritation study.

RESULTS

The experimental design was suitable to produce nanosized stable lipid carriers of the drug with high drug entrapment. The drug and excipients were found to be compatible. The thermal and surface characteristics study proved the high loading of drug in the nanoparticles. The surface morphology study showed the formation of irregular-shaped NLCs. The transdermal patch had good mechanical properties. The ex vivo study of the formulated patch showed a sustained release of the drug over 24h. No skin irritation was reported from the transdermal patch.

CONCLUSION

Therefore, it can be concluded that the nanoparticles loaded transdermal patch of rizatriptan benzoate can be promising in controlling the divergent phases of migraine.

In situ gelling nanosuspension as an advanced platform for fluticasone propionate nasal delivery

In this work we present the development of in situ gelling nanosuspension as advanced form for fluticasone propionate nasal delivery. Drug nanocrystals were prepared by wet milling technique. Incorporation of drug nanocrystals into polymeric in situ gelling system with pectin and sodium hyaluronate as constitutive polymers was fine-tuned attaining appropriate formulation surface tension, viscosity and gelling ability. Drug nanonisation improved the release profile and enhanced formulation mucoadhesive properties. QbD approach combining formulation and administration parameters resulted in optimised nasal deposition profile, with 51.8% of the dose deposited in the middle meatus, the critical region in the treatment of rhinosinusitis and nasal polyposis. Results obtained in biocompatibility and physico-chemical stability studies confirmed the leading formulation potential for safe and efficient nasal corticosteroid delivery.

Loratadine

Loratadine, 4-(8-Chloro-5,6-dihydro-11H-benzo[5,6]cyclohepta[1,2-b]pyridin-11-ylidene)-1-piperidinecarboxylic acid ethyl ester, is an antihistamine drug with long-acting effects and has limited selectivity for peripheral H1 receptors. It is widely used for the prevention of allergic diseases such as rhinitis chronic urticaria, and asthma. This chapter discusses, by a critical extensive review of the literature, the description of loratadine in terms of its names, formulae, elemental composition, appearance, methods of preparation. The profile contains physicochemical properties of Loratadine, including pKa value, solubility and X-ray powder diffraction. In addition, it involves Fourier transform infrared spectrometry, nuclear magnetic resonance spectroscopy and mass spectroscopy for functional groups and structural confirmation of. The chapter also includes methods of analysis of the drug such as compendial, titrimetric, electrochemical, spectroscopic, chromatographic and capillary electrophoretic methods. The chapter also covers clinical applications of the drug such as its uses, doses, ADME profiles and mechanism of action.

A new nanosuspension prepared with wet milling method for oral delivery of highly variable drug Cyclosporine A: Development, optimization and in vivo evaluation

Cyclosporine A (CsA) is a cyclic polypeptide, that has been widely used for immunosuppression. This study aims to develop nanosuspension for oral administration of CsA using the wet milling (WM) method one of the top-down technologies. The WM method was optimized by studying the effects of critical process parameters for WM on the particle size (PS), particle size distribution (PDI), and zeta potential (ZP) of nanosuspensions using the Design of Experiment (DoE) approach. Nanosuspension was developed using hydroxypropyl methylcellulose (HPMC) and sodium dodecyl sulfate (SDS) and in vitro characterization studies were performed. In vitro dissolution and in vivo pharmacokinetic studies were conducted with biorelevant media (fasted and fed state simulated fluids) and fasted and fed states in rats, respectively. In vivo immunological studies were also performed. PS, PDI, and ZP values for nanosuspension were approximately 600 nm, 0.4, -25 mV, respectively. The solubility of CsA was increased by 4.5-folds by nanosuspensions. Dissolution studies showed that nanosuspension had higher dissolution than the commercial product in the FeSSIF medium. The pharmacokinetic study indicated that AUC_0-24 values of CsA nanosuspension were to be 2.09 and 5.51-fold higher than coarse powder in fasted and fed conditions, respectively. Immunological studies were carried out after oral administration of nanosuspension for 21 days, the ratio of CD4+/CD8+ was found to be more acceptable than the commercial product. These results demonstrated that nanosuspension is a promising approach for increasing the bioavailability and avoiding the food effect on absorption of CsA which one of the highly variable drugs.

Preparation and Characterization of Mucoadhesive Loratadine Nanoliposomes for Intranasal Administration

Objectives

The present study aimed to formulate and characterize mucoadhesive liposomes for intranasal delivery of loratadine. In particular, the formulation was aimed to improve the drug bioavailability and efficacy.

Materials and Methods

Liposomes were prepared by thin-film hydration method, with soybean phosphatidylcholine and cholesterol as main components. Liposomes were coated with chitosan solution at a concentration of 0.05% and 0.1%, w/v. The formulations were assessed for particle size, polydispersity index (PDI), encapsulation efficiency (EE), thermodynamic behavior, in vitro drug release, mucoadhesiveness, and stability.

Results

Particle size analysis showed that the vesicles of uncoated and coated liposomes with 0.05% and 0.1% chitosan were characterized by size of 193±3.3 nm, 345±4.6, and 438±7.3 nm, respectively. Size distribution for developed formulations was in the acceptable range (PDI <0.7). EE was recorded to be approximately 80%. Chitosan-coated liposomes demonstrated slower release rate as compared to uncoated liposomes. Drug release kinetics profile for all the formulations followed a zero-order model. Chitosan coating improved mucoadhesiveness by more than 3-fold as compared to uncoated liposomes. However, no significant differences were recorded between mucin adsorption behavior of 0.05% and 0.1% chitosan-coated liposomes (p>0.05). For stability studies, liposomes were stored at 4°C for 3 months, and changes in particle diameter, PDI, and EE % were recorded. No significant alternations were reported in particles size, PDI, and drug leakage of coated liposomes.

Conclusion

Liposomes coated with 0.05% chitosan were chosen as the optimum formulation, which demonstrated a significant potential for overcoming the nasal drug delivery limits for short residence time and mucociliary clearance.

α-amyrin-loaded nanocapsules produce selective cytotoxic activity in leukemic cells

INTRODUCTION

Amyrins are triterpenes that have attractive pharmacological potential; however, their low water solubility and erratic stomach absorption hinders their use as a drug. The aim of this paper was to develop a novel α-amyrin-loaded nanocapsule for intestinal delivery and evaluate, preliminarily, its cytotoxic ability against leukemic cells.

MATERIAL AND METHODS

Five nanocapsule formulations were designed by the solvent displacement-evaporation method. Poly-ε-caprolactone, Eudragit® E100, and Kollicoat® Mae 100 P were used as film-former materials. Particle size, polydispersity index (PdI), zeta potential, and the pH of all formulations were measured. The cytotoxic potential of the nanocapsules was evaluated in vitro using different leukemic lineages RESULTS: Nanocapsules coated with Kollicoat® Mae 100 P presented the smallest particle size (130 nm), the lowest zeta-potential (-38 mV), and the narrowest size distribution (PdI = 0.100). The entrapment efficiency was 65.47%, while the loading capacity was 2.40%. Nanocapsules release 100% of α-amyrin in 40 min (pH 7.4), by using a possible mechanism of swelling-diffusion. The formulation showed excellent on-shelf physicochemical stability during one year. Additionally, nanocapsules produced a selective cytotoxic effect on a human leukemia lineage Kasumi-1, an acute myeloid leukemia cell line, and produced cell death by apoptosis CONCLUSION: α-amyrin-loaded nanocapsules appear to be a promising nanoformulation that could be used against leukemia.

Nanomedicine for Drug Delivery throughout the Alimentary Canal

The field of nanomedicine continues to grow with new technologies and formulations in development for several disease states. Much research focuses on the use of injectable nanomedicines for treatment of neoplasms; however, there are several formulations in development that use nanotechnology that can be administered enterally for noncancer indications. These nanomedicine treatments have been developed for systemic drug delivery or local drug delivery along the gastrointestinal tract. This Review gives a brief overview of the alimentary canal and highlights new research in nanomedicine in noncancer disease states delivered via enteral routes of administration. Relevant recent research is summarized on the basis of the targeted site of action or absorption, including the buccal, sublingual, stomach, small intestine, and large intestine areas of the alimentary canal. The benefits of nanodrug delivery are discussed as well as barriers and challenges for future development in the field.

Cationic Solid Lipid Nanoparticles of Resveratrol for Hepatocellular Carcinoma Treatment: Systematic Optimization, in vitro Characterization and Preclinical Investigation

Aim

The present study focuses on the development and evaluation of the resveratrol (RV)-loaded cationic solid lipid nanoparticles (RV-c-SLNs) for the management of hepatocellular carcinoma (HCC).

Materials and Methods

Optimization of formulation was performed using factorial design, and further in vitro drug release, cytotoxicity, biodistribution, in vivo preclinical, and biochemical evaluation were carried out.

Results

The optimized formulation exhibited uniform size, homogeneous disparity, positive zeta potential, and stability over 12-week storage at 25°C/60% RH. The in vitro drug release and cytotoxicity study showed 60% drug release within the first 6 hours and comparatively higher cytotoxicity on HepG2 cell line by resveratrol-solid lipid nanoparticle (RV-SLN) as compared to the RV solution. In addition, an anticancer action and biodistribution study on a rat model of HCC showed significant reduction of tumor volume and higher accumulation in the tumor tissue from RV-c-SLN (P<0.01) over RV solution and RV-SLN. Furthermore, RV-c-SLN showed significant down-regulation in the levels of pro-inflammatory cytokines and balancing of antioxidant enzymes. Histopathological investigation showed reduced occurrence of hepatic nodules, necrosis formation, infiltration of inflammatory cells, blood vessels inflammation, and cell swelling.

Conclusion

Overall, the obtained results construed that RV-c-SLN with improved antitumor activity as clearly evident from in vitro, in vivo, and biochemical investigations.

Development, larvicide activity, and toxicity in nontarget species of the Croton linearis Jacq essential oil nanoemulsion

In this study, the essential oil (EO) from leaves of Croton linearis Jacq was extracted and characterized by GC/MS. The EO hydrophilic-lipophilic balance required (rHLB) for nanoemulsion (NE) development was determined by the Griffin' method. For evaluating the larvicidal effect against Aedes aegypti, the preparation process of NE was optimized, using a central composite design. It was also evaluated the possible toxic effect of NE in nontarget species. The leaves of C. linearis contain 1.50% of EO, enclosing 61 volatile compounds, mainly eucalyptol (26.66%). The best surfactant, oil:water ratio (4.5-5.0-91.5; % w:w:w), allows to achieve the optimal NE, using a stirring speed of 800 rpm, the addition rate of 0.5 ml/min, and a stirring time of 30 min. NE (with particle size = 163 nm) showed a larvicide effect (LC₅₀ = 17.86 μg/mL) more potent than the whole EO (LC₅₀ = 64.24 μg/mL). NE showed neither hemolytic effect nor cytotoxicity, and it was classified as a nontoxic product, according to the OECD class toxicity test (IC₅₀ > 2000 mg/kg). This product arises in a new green bio-larvicide that could be used for mosquito control.

Palm Oil in Lipid-Based Formulations and Drug Delivery Systems

Palm oil is natural oil packed with important compounds and fatty acids ready to be exploited in lipid-based formulations and drug delivery. Palm oil and palm kernel oil contain long-chain and medium-chain triglycerides, respectively, including phytonutrients such as tocotrienol, tocopherol and carotenes. The exploitation of these compounds in a lipid-based formulation would be able to address hydrophobicity, lipophilicity, poor bioavailability and low water-solubility of many current drugs. The utilisation of palm oil as part of the drug delivery system seemed to improve the bioavailability and solubility of the drug, stabilising emulsification of formulation between emulsifier and surfactant, promoting enhanced drug permeability and performance, as well as extending the shelf-life of the drug. Despite the complexity in designing lipid-based formulations, palm oil has proven to offer dynamic behaviour in providing versatility in drug design, form and delivery. However, the knowledge and application of palm oil and its fractions in lipid-based formulation are scarce and interspersed. Therefore, this study aims to focus on the research and outcomes of using palm oil in lipid-based formulations and drug delivery systems, due to the importance of establishing its capabilities and benefits.

Rosuvastatin calcium nanoparticles: Improving bioavailability by formulation and stabilization codesign

Purpose

Rosuvastatin calcium (ROSCa) is a poorly soluble drug with bioavailability not exceeding 20%. Decreasing the particle size may enhance its solubility, dissolution rate and bioavailability. Therefore, the aim of the current study is to prepare ROSCa nanoparticles by wet milling technique using planetary ball mill. The codesign between formulation and stabilization of nanoparticles was studied to achieve both high dissolution as well as bioavailability.

Methodology

ROSCa nanosuspensions was prepared by wet milling technique using planetary ball mill, by applying milling ball size of 0.1 mm at speed of 800 rpm for 3 cycles each cycle composed of 10 minutes. HPMC, PVP k-30, pluronic F-127, Tween 80 and PEG 6000 were used as stabilizers. The nanosuspensions were then freeze-dried, and the dried nanoparticles were evaluated for particle size, zeta potential, in-vitro dissolution test, XRPD and in-vivo study.

Results

ROSCa nanoparticles stabilized with 10% PVP (P3) had a good stability with smallest particle size, which in turn enhanced the dissolution rate. The particle size of the leading formula was 461.8 ± 16.68 nm with zeta potential of -31.8 ± 7.22 mV compared to untreated drug that has a particle size of 618μm. The percent of ROSCa dissolved after 1 hour enhanced significantly which reached 72% and 58.25% for leading nanoparticle formula and untreated ROSCa, respectively (P < 0.05). The in-vivo study of ROSCa from the leading nanoparticle formula showed a significant enhancement in the C_max after 2 h (82.35 ng/ml) compared to 9.2 ng/ml for untreated drug.

Conclusion

Wet milling technique is a successful method to prepare ROSCa nanoparticles. From different stabilizer used, PVP (10%) was able to produce stable nanoparticle with small particle size which significantly enhance the dissolution rate and pharmacokinetics parameters of ROSCa.

Implication of nano-antioxidant therapy for treatment of hepatocellular carcinoma using PLGA nanoparticles of rutin

Aim: The present work describes the development of poly(lactic co-glycolic acid) (PLGA) nanoparticles (NPs) of rutin (RT) for the treatment of hepatocellular carcinoma in rats. Materials & methods: RT-loaded PLGA NPs (RT-PLGA-NPs) were prepared by double emulsion evaporation method. Further these are optimized by Box–Behnken design. PLGA NPs were evaluated for size, polydispersity index, drug-loading capacity, entrapment, gastric stability, in vitro drug release, in vivo preclinical studies and biochemical studies. Results: Preclinical evaluation of RT-PLGA-NPs for anticancer activity through oral route exhibited significant improvement in hepatic, hematologic and renal biochemical parameters. Highly superior activity was observed in regulating oxidative stress and inflammatory markers, antioxidant enzymes, cytokines and inflammatory mediators and their role on plasma membrane ATPases responsible for destruction in liver tissues. Conclusion: Histopathological evaluation indicated reduced incidence of hepatic nodules, necrosis formation, infiltration of inflammatory cells, blood vessel inflammation and cell swelling with RT-PLGA-NP treatment along with considerable downregulation in the levels of proinflammatory cytokines.