Hydrothermal synthesis of nanostructured spinel lithium manganese oxide

Anomalous Temperature-Induced Particle Size Reduction in Manganese Oxide Nanoparticles

The intricate role of temperature in the structure-property relationship of manganese oxide nanoparticles (Mn3O4 NPs) remains an open question. In this study, we successfully synthesized Mn3O4 NPs using the hydrothermal method with two differing temperatures, namely, 90 and 150 °C. Interestingly, a smaller average particle size is found when Mn3O4 NPs are synthesized at 150 °C compared to 90 °C, corresponding to 46.54 and 63.37 nm, respectively. This was confirmed by the time variation of temperature setting of 150 °C where the size evolution was insignificant, indicating a competing effect of nucleation and growth particles. Under varying NaOH concentrations (2-6 M) at 150 °C, a reduction in the particle size is found at the highest NaOH concentration (6 M). The particle grows slightly, indicating that the growth state is dominant compared to the nucleation state at low concentrations of NaOH. This finding implies that the high nucleation rate originates from the excessive monomer supply in the high-temperature reaction. In terms of crystallinity order, the structural arrangement of Mn3O4 NPs (150 °C) is largely decreased; this is likely due to a facile redox shift to the higher oxidation state of manganese. In addition, the higher ratio of adsorbed oxygen and lattice oxygen in Mn3O4 NPs at 150 °C is indirectly due to the higher oxygen vacancy occupancies, which supported the crystallinity decrease. Our findings provide a new perspective on manganese oxide formation in hydrothermal systems.

Efficient Direct Recycling of Degraded LiMn2O4 Cathodes by One-Step Hydrothermal Relithiation

Due to the large demand of lithium-ion batteries (LIBs) for energy storage in daily life and the limited lifetime of commercial LIB cells, exploring green and sustainable recycling methods becomes an urgent need to mitigate the environmental and economic issues associated with waste LIBs. In this work, we demonstrate an efficient direct recycling method to regenerate degraded lithium manganese oxide (LMO) cathodes to restore their high capacity, long cycling stability, and high rate performance, on par with pristine LMO materials. This one-step regeneration, achieved by a hydrothermal reaction in dilution Li-containing solution, enables the reconstruction of desired stoichiometry and microphase purity, which is further validated by testing spent LIBs with different states of health. Life-cycle analysis suggested the great environmental and economic benefits enabled by this direct regeneration method compared with today's pyro- and hydrometallurgical processes. This work not only represents a fundamental understanding of the relithiation mechanism of spent cathodes but also provides a potential solution for sustainable and closed-loop recycling and remanufacturing of energy materials.

Template-Synthesized LiCoO2, LiMn2O4, and LiNi0.8Co0.2O2 Nanotubes as the Cathode Materials of Lithium Ion Batteries

The first point of this work is to synthesize LiCoO2, LiNi0.8 Co0.2 O2, and LiMn2O4 nanotubes with the template of porous anodic aluminum oxide by thermal decomposition of sol-gel precursors. The as-synthesized materials were open-ended nanotubes with uniform shape and size based on the analysis of scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. An "in situ reaction from nanoparticle to nanotube" mechanism was discussed for the formation process of the nanotubes. The second point of this paper is to investigate the electrochemical properties of the as-synthesized nanotubes for the cathode materials of lithium ion batteries. It was found that the nanotube electrodes exhibited better reversibility and higher discharge capacities than that of their nanocrystalline counterparts. The reason for the improved electrochemical performance of the nanotube electrodes was also interpreted.