Intermolecular mechanistic treatment of recalcitrant environmental pollutants: Azo, benzene, naphthalene and vinyl sulfone

Highly efficient treatment of real benzene dye intermediate wastewater by simple limestone and lime neutralization-coagulation with improved Fenton oxidation

Multistage Fenton oxidation is a favored method for the treatment of benzene dye intermediate (BDI) wastewater, but the pH adjustments required after each stage of the Fenton process with a simple way is still a challenge. Limestone pretreatment and lime neutralization-coagulation were used to solve the problem in multistage Fenton process. First, we determined the optimal conditions of Fenton oxidation using the Box-Behnken response surface method. Limestone pretreatment before the multistage Fenton process allowed for simultaneous pH adjustment and 14.15% COD removal. Most notably, the lime cream neutralization-coagulation process effectively adjusted the pH after each stage of the Fenton process. The optimum CaO particle size, lime mass fraction, mixing time, and stirring speed were determined by orthogonal tests. COD removal (89.23%) was obtained when lime cream neutralization-coagulation was applied to the three-staged Fenton process, while only 58.57% COD removal was obtained by the unadjusted single-staged Fenton process. The COD and wastewater color were reduced from 10,600 mg/L and 12,200 multiples to 495 mg/L and 20 multiples, respectively, using the adjusted process. This improved method provides a promising cost-effective way to efficiently treat real BDI wastewater.

Study on the degradation mechanism and pathway of benzene dye intermediate 4-methoxy-2-nitroaniline via multiple methods in Fenton oxidation process

Benzene dye intermediate (BDI) 4-methoxy-2-nitroaniline (4M2NA) wastewater has caused significant environmental concern due to its strong toxicity and potential carcinogenic effects. Reports concerning the degradation of 4M2NA by advanced oxidation process are limited. In this study, 4M2NA degradation by Fenton oxidation has been studied to obtain more insights into the reaction mechanism involved in the oxidation of 4M2NA. Results showed that when the 4M2NA (100 mg L-1) was completely decomposed, the TOC removal efficiency was only 30.70-31.54%, suggesting that some by-products highly recalcitrant to the Fenton oxidation were produced. UV-Vis spectra analysis based on Gauss peak fitting, HPLC analysis combined with two-dimensional correlation spectroscopy and GC-MS detection were carried out to clarify the degradation mechanism and pathway of 4M2NA. A total of nineteen reaction intermediates were identified and two possible degradation pathways were illustrated. Theoretical TOC calculated based on the concentration of oxalic acid, acetic acid, formic acid, and 4M2NA in the degradation process was nearly 94.41-97.11% of the measured TOC, indicating that the oxalic acid, acetic acid and formic acid were the main products. Finally, the predominant degradation pathway was proposed. These results could provide significant information to better understand the degradation mechanism of 4M2NA.