Preparation of ion imprinted magnetic Fe 3 O 4 nanoparticles for selective remediation of Pb(II)

Application Prospect of Ion-Imprinted Polymers in Harmless Treatment of Heavy Metal Wastewater

With the rapid development of industry, the discharge of heavy metal-containing wastewater poses a significant threat to aquatic and terrestrial environments as well as human health. This paper provides a brief introduction to the basic principles of ion-imprinted polymer preparation and focuses on the interaction between template ions and functional monomers. We summarized the current research status on typical heavy metal ions, such as Cu(II), Ni(II), Cd(II), Hg(II), Pb(II), and Cr(VI), as well as metalloid metal ions of the As and Sb classes. Furthermore, it discusses recent advances in multi-ion-imprinted polymers. Finally, the paper addresses the challenges faced by ion-imprinted technology and explores its prospects for application.

Synthesis of nanostructured novel ion-imprinted polymer for selective removal of Cu2+ and Sr2+ ions from reverse osmosis concentrated brine

This study aims to prepare an ion-imprinted polymer (IIP) using copper sulfate as a template and potassium persulfate as an initiator to selectively adsorb copper ions (Cu²⁺) from aqueous solutions and in an attempt to also test its applicability for removing strontium ions (Sr²⁺). The prepared polymer was denoted by IIP-Cu. Various physical and chemical characterizations were performed for the prepared IIP-Cu. The scanning electron microscopy and transmission electron microscopy analyses confirmed the cavities formed after the removal of the template. It also indicated that the IIP-Cu had a rough and porous topology. The X-ray photoelectron spectroscopy confirmed the successful removal of the Cu template from IIP-Cu. The Brunauer-Emmet-Teller revealed that the surface area of IIP-Cu is as high as 152.3 m²/g while the pore radius is 8.51 nm. The effect of pH indicated that the maximum adsorption of Cu²⁺ was achieved at pH 8 with 98.7%. Isotherm studies revealed that the adsorption of Cu²⁺ was best explained using Langmuir models with a maximum adsorption capacity of 159 mg/g. The effect of temperature revealed that an increase in temperature had an adverse impact on Cu²⁺ removal from the aqueous solution, which was further confirmed by thermodynamic studies. The negative value of standard enthalpy change (-4.641 kJ/mol) revealed that the adsorption of Cu²⁺ onto IIP-Cu was exothermic. While the continuous increase in Gibbs free energy from -6776 kJ/mol to -8385 kJ/mol with the increase in temperature indicated that the adsorption process was spontaneous and feasible. Lastly, the positive value of the standard entropy change (0.023 J/mol.K) suggested that the Cu²⁺ adsorption onto IIP-Cu had a good affinity at the solid-liquid surface. The efficiency of the prepared IIP-Cu was also tested by studying the adsorption capacity using Sr²⁺ and real brine water. The results revealed that IIP-Cu was able to remove 63.57% of Sr²⁺ at pH 8. While the adsorption studies revealed that the experiment was best described using the Langmuir model with a maximum adsorption capacity of 76.92 mg/g. Additionally, IIP-Cu was applied in a real brine sample, which consisted of various metal ions. The highest percentage of Cu²⁺ removal was 90.6% and the lowest was 65.63% in 1:4 and 1:1 brine ratios, respectively. However, this study indicates the successful application of IIP-Cu in a real sample when it comes to the effective and efficient removal of Cu²⁺ in a solution consisting of various competing ions.

Synthesis of a magnetic SBA-15-NH2@Dual-Template Imprinted Polymer for solid phase extraction and determination of Pb and Cd in vegetables; Box Behnken design

In this study, a simple one-step method was applied for extraction and determination of lead and cadmium. The significant variables in extraction and pre-concentration were identified using analysis of variance and their behavior was modeled. Dual-template imprinted polymer was synthesized on modified Mesoporous silica structures coated with Fe₃O₄ magnetic nanoparticles. The optimum condition was 6.12 for pH, 40.62 mg for the polymer amount and 17.38 for the ultrasonic time. Concentration range, correlation coefficient, limit of detection and relative standard deviation for lead were reported to be 0.5-950, 0.9988, 0.35 μg L^-1 and 3.5%, respectively. For cadmium the above mentioned figure of merits were 0.3-980, 0.9969, 0.15 μg L^-1 and 2.4%, respectively. The adsorption capacities for lead and cadmium were reported to be 10.28 and 10.38, while their imprinting factors were 5.89 and 6.36, respectively.

Green synthesis of hydrophilic activated carbon supported sulfide nZVI for enhanced Pb(II) scavenging from water: Characterization, kinetics, isotherms and mechanisms

For green synthesis of nZVI with low aggregation and high antioxidation, green tea extracts were explored as reductant during the synthesis with modification by hydrophilic porous activated carbon (HPAC) and sulfidation technology. Characterization results identified the effective preparation of porous activated carbon (PAC) with microporous and mesoporous characteristics, and the successful loading of S-nZVI nanoparticles on S-nZVI@HPAC. Moreover, HPAC was identified to have a higher degree of hydrophilicity surface compared to PAC, while the S-nZVI with an atomic ratio of S/Fe (0.16) further improved the hydrophilic performance of S-nZVI@HPAC. Batch adsorption revealed that the S-nZVI@HPAC possessed a pH-dependent adsorption performance with a fast kinetic equilibrium within 120 min and an outstanding Pb(II) binding of 295.30 mg/g at pH = 5.0 and 50 °C. Thermodynamic results exhibited positive ΔH° and ΔS°, clearly indicative of the endothermic property of Pb(II) uptake onto S-nZVI@HPAC with an increase in randomness, while the negative ΔG° uncovered a favorable and spontaneous process. Furthermore, the S-nZVI@HPAC was believed to enhance the Pb(II) uptake via the synergistic effects of electrostatic attraction, chemical precipitation, complexation and reduction. The results of this work highlighted the hydrophilic porous activated carbon supported sulfide nZVI for efficient remediation of Pb(II) contaminated water.

Adsorption of Pb(II) ions from contaminated water by 1,2,3,4-butanetetracarboxylic acid-modified microcrystalline cellulose: Isotherms, kinetics, and thermodynamic studies

Microcrystalline cellulose (MCC) has been utilized as an adsorbent material for the removal of Pb(II) ions from aqueous solution after treatment with 1,2,3,4-butanetetracarboxylic acid (BTCA) at elevated temperature to obtain MMCC. The resulting adsorbent was characterized for point of zero point charge (pHZPC), estimation of carboxyl content, Fourier transform infrared spectroscopy (FT-IR), scan electron microscopy (SEM), and textural properties, including surface area, and subsequently utilized for the removal of Pb(II) ions from aqueous solution. The adsorption process was probed by investigating the effect of adsorbent dose, pH of solution, temperature, agitation time, and Pb(II) ion concentration. The results showed successful functionalization of MCC using BTCA, significantly improved the binding properties of the adsorbent towards Pb(II) ions. Isothermal adsorption data was analyzed using Langmuir, Freundlich and Temkin models, evaluated via nonlinear regression analysis. The maximum adsorption capacity was found to be 1155 mg/g (at pH 5 and 30 °C) from Langmuir theory, and appears independent of surface area. The Freundlich model was found to provide the best fit and the constant n was determined to be 2.69, indicating that adsorption of Pb(II) ions onto MMCC is favorable. Kinetic modelling showed good agreement for the pseudo-second order kinetic model, supporting the theory that chemisorption is involved in the adsorption process, which is promoted by a high density of active sites. Thermodynamic analysis showed that the adsorption of Pb(II) ions onto MMCC was endothermic and nonspontaneous; hence, MMCC offers an effective method of Pb(II) ion removal from aqueous solutions, with potential for water remediation processes.

Synthesis of diglycolic acid functionalized core-shell silica coated Fe3O4 nanomaterials for magnetic extraction of Pb(II) and Cr(VI) ions

Amine-terminated core-shell silica coated magnetite nanoparticles were functionalized with diglycolic acid for the first time to create acid moiety on the surface of the nanoparticles. The formation of magnetite nanoparticles was scrutinised through XRD, SEM, EDS, TEM, VSM and FTIR spectroscopy. The BET surface area of nano-sorbent was found to be 4.04 m2/g with pore size 23.68 nm. These nanomaterials were then utilized to remove the Pb(II) and Cr(VI) ions from their aqueous media and uptake of metal ions was determined by atomic absorption spectroscopy (AAS). A batch adsorption technique was applied to remove both ions at optimised pH and contact time with maximum adsorption efficiency for Pb(II) ions at pH 7 while for Cr(VI) ions at pH 3. Adsorption mechanism was studied using Langmuir and Freundlich isotherms and equilibrium data fitted well for both the isotherms, showing complex nature of adsorption comprising both chemisorption as well as physio-sorption phenomena. The nanosorbents exhibited facile separation by applying external magnetic field due to the ferrimagnetic behaviour with 31.65 emu/g saturation magnetization. These nanosorbents were also found to be used multiple times after regeneration.

Excellent adsorptive performance of a new nanocomposite for removal of toxic Pb(II) from aqueous environment: Adsorption mechanism and modeling analysis

Herein, a novel nanocomposite (Fe₃O₄@TATS@ATA) was prepared and used for adsorptive removal of Pb(II) ions from aqueous environment. The magnetic nanocomposite (Fe₃O₄@TATS@ATA) was characterized using FTIR, TEM, SEM, EDX, element mapping analysis (EMA), TGA analysis, XRD patterns, VSM, BET analysis, XPS spectrum, and zeta potential. The FTIR study confirmed the modification of Fe₃O₄ nanoparticles with triaminetriethoxysilane and 2-aminoterephthalic acid while XPS analysis (with peaks at 283.6, 285.1, 286.3, 284.5.0, 288.4 eV) displayed the presence of CSi, CN, OCNH, CC/CC and OCO functional groups, respectively on Fe₃O₄@TATS@ATA. The BET surface area, average pore size, pore volume and magnetization saturation for Fe₃O₄@TATS@ATA were found to be 114 m²/g, 6.4 nm, 0.054 cm^-3/g, and 22 emu/g, respectively. The adsorption isotherm data showed that Pb(II) adsorption onto Fe₃O₄@TATS@ATA fitted to Langmuir and Dubinin-Raduskevich isotherm model due to better R² value which was greater than 0.9 and q_m of Pb(II) was 205.2 mg/g at pH 5.7 in 150 min. Adsorption kinetics data displayed that Pb(II) adsorption onto Fe₃O₄@TATS@ATA was fitted to the pseudo-second-order and Elovich kinetic models. Thermodynamic outcomes exhibited the exothermic and spontaneous nature of adsorption. Results showed that Fe₃O₄@TATS@ATA nanocomposite was promising material for efficient removal of toxic Pb(II) from aqueous environment.

Removal of Pb(II) Ions from Wastewater by Using Polyethyleneimine-Functionalized Fe3O4 Magnetic Nanoparticles

A class of polyethyleneimine (PEI)-functionalized Fe3O4 magnetic nanoparticles (MNPs) has been facilely produced through a solvothermal process. The synthetic MNPs have been characterized by multiple technologies and then used for Pb(II) ion sorption from the aqueous media in different conditions. It was found the Pb(II) adsorption behaviors could be well fitted by the pseudo second-order kinetic and Langmuir isotherm models. The maximum Pb(II) adsorption capacity at 25 °C and pH 5.0 was calculated to be 60.98 mg/g. Moreover, effects of temperature, pH, and electrolyte of aqueous phase on the Pb(II) adsorption capacity of MNPs have been carefully examined. The Pb(II) adsorbing capacity was enhanced with temperature or pH rising, but reduced with the addition of various electrolytes. Additionally, the recyclability of synthetic MNPs has been also assessed. The prepared PEI-functionalized MNPs could still maintain good adsorption performance after five cycles of Pb(II) removal. These results indicated that the PEI-functionalized Fe3O4 MNPs could be readily synthesized and served as a desirable and economic adsorbent in Pb(II)-contaminated wastewater treatment.

Magnetic nanoparticles coated with aminated polymer brush as a novel material for effective removal of Pb(II) ions from aqueous environments

In the present study, a poly (vinylbenzyl chloride) grafted Fe₃O₄ nanoparticle (Fe₃O₄@PVBC) was prepared by surface-initiated reversible addition fragmentation chain transfer (SI-RAFT) polymerization and subsequently coated with tris (aminoethyl) amine (TAEA). Then, Fe₃O₄@PVBC-TAEA nanoparticles were utilized as a novel adsorbent for removal of Pb(II) from aqueous media and optimal adsorption conditions were determined with response surface methodology (RSM). The used adsorbent was characterized by using X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and vibrating sample magnetometer (VSM). RSM with central composite design (CCD) was carried out to evaluate the effect of initial pH, initial Pb(II) concentration (C₀, mg/L), adsorbent dosage (mg), and contact time (min). The optimum initial pH, C₀, adsorbent dosage, and contact time were found to be 5.88, 46.51 mg/L, 17.41 mg, and 108.21 min, respectively. The maximum removal efficiency and adsorption capacity were 97.07% and 129.65 mg/g under these conditions, respectively. The kinetic data revealed that the adsorption mechanism could be best explained by the pseudo-second-order and Weber-Morris models. The isotherm studies found that both the Langmuir and Freundlich isotherm models fitted the experimental data well. The thermodynamic analysis indicated that the adsorption nature is exothermic, applicable, and spontaneous.