A review of titanium dioxide and its highlighted application in molecular imprinting technology in environment

3D/1D Fe3O4@TiO2/TC-TiO2/SiO2 Magnetic Inorganic-Framework Molecularly Imprinted Fibers for Targeted Photodegradation

To achieve a selective degradation of pollutants in a water body, 3D/1D magnetic molecularly imprinted fibers Fe3O4@TiO2/TC-TiO2/SiO2 were fabricated by an electrospinning method. The molecularly imprinted layer was successfully prepared by a direct imprinting method using TiO2 as a functional monomer. Fe3O4 facilitates the catalyst recovery and light utilization. The as-prepared fibrous photocatalyst has a large specific surface area of 132.4 m2/g. The successful generation of imprinted sites was proven by various characterizations. The weak interaction between the inorganic functional monomer and tetracycline (TC) was determined to be van der Waals force and hydrogen bonds by the IGMH isosurface theory. The construction of the 3D/1D homojunction of molecularly imprinted materials is beneficial to charge transfer. The as-prepared photocatalyst exhibits a high selectivity coefficient α = 737.38 competing with RhB. The TC removal efficiency reached 100% within only 20 min. In addition, the possible degradation pathway and the degradation mechanism are reasonably proposed. This work not only provides an in-depth mechanism of the weak interaction between the inorganic molecularly imprinted functional monomer and pollutant molecules but also offers new thoughts on the fabrication of photocatalysts for the effective and selective treatment of pollutants in water bodies.

Molecularly Imprinted Heterostructure-Assisted Laser Desorption Ionization Mass Spectrometry Analysis and Imaging of Quinolones

Quinolone residues resulting from body metabolism and waste discharge pose a significant threat to the ecological environment and to human health. Therefore, it is essential to monitor quinolone residues in the environment. Herein, an efficient and sensitive matrix-assisted laser desorption/ionization mass spectrometry (MALDI/MS) method was devised by using a novel molecularly imprinted heterojunction (MIP-TNs@GCNs) as the matrix. Molecularly imprinted titanium dioxide nanosheets (MIP-TNs) and graphene-like carbon nitrides (GCNs) were associated at the heterojunction interface, allowing for the specific, rapid, and high-throughput ionization of quinolones. The mechanism of MIP-TNs@GCNs was clarified using their adsorption properties and laser desorption/ionization capability. The prepared oxygen-vacancy-rich MIP-TNs@GCNs heterojunction exhibited higher light absorption and ionization efficiencies than TNs and GCNs. The good linearity (in the quinolone concentration range of 0.5-50 pg/μL, R2 > 0.99), low limit of detection (0.1 pg/μL), good reproducibility (n = 8, relative standard deviation [RSD] < 15%), and high salt and protein resistance for quinolones in groundwater samples were achieved using the established MIP-TNs@GCNs-MALDI/MS method. Moreover, the spatial distributions of endogenous compounds (e.g., amino acids, organic acids, and flavonoids) and xenobiotic quinolones from Rhizoma Phragmitis and Rhizoma Nelumbinis were visualized using the MIP-TNs@GCNs film as the MALDI/MS imaging matrix. Because of its superior advantages, the MIP-TNs@GCNs-MALDI/MS method is promising for the analysis and imaging of quinolones and small molecules.

Targeted degradation of refractory organic compounds in wastewaters based on molecular imprinting catalysts

Efficient removal of low-concentration refractory pollutants is a crucial problem to ensuring water safety. The use of heterogeneous catalysis of molecular imprinting technology combined with traditional catalysts is a promising method to improve removal efficiency. Presently, the research into molecular imprinting targeting catalysts focuses mainly on material preparation and performance optimization. However, more researchers are investigating other applications of imprinting materials. This review provides recent progress in photocatalyst preparation, electrocatalyst, and Fenton-like catalysts synthesized by molecular imprinting. The principle and control points of target catalysts prepared by precipitation polymerization (PP) and surface molecular imprinting (S-MIP) are introduced. Also, the application of imprinted catalysts in targeted degradation of drugs, pesticides, environmental hormones, and other refractory pollutants is summarized. In addition, the reusability and stability of imprinted catalyst in water treatment are discussed, and the possible ecotoxicity risk is analyzed. Finally, we appraised the prospects, challenges, and opportunities of imprinted catalysts in the advanced oxidation process. This paper provides a reference for the targeted degradation of refractory pollutants and the preparation of targeted catalysts.

Insight into the inhibitory mechanism of soluble ionic liquids on the transport of TiO2 nanoparticles in saturated porous media: Roles of alkyl chain lengths and counteranion types

Column experiments were carried out to investigate the transport of TiO₂ nanoparticles (nTiO₂) in water-saturated porous media in the presence of various imidazolium-based ionic liquids (ILs) with different alkyl chain lengths and counteranions. The results indicated that the effects of ILs on nTiO₂ transport were considerably dependent upon IL species. In general, the transport-inhibition effects increased with the increasing length of branched alkyl chain on the ILs (i.e., [C₆mim]Cl > [C₄mim]Cl > [C₂mim]Cl). The trend was dominated by the hydrophobicity effects of ILs. Meanwhile, the inhibitory effects of ILs were strongly related to the counteranions and followed the order of [C₄mim]Cl > [C₄mim][TOS] > [C₄mim][PF₆], mainly due to different electrostatic repulsion force between nanoparticles and porous media in the presence of various ILs. Furthermore, the inhibitory role of [C₄mim][TOS] in nTiO₂ transport under acidic conditions (i.e., pH 6.5) was greater than that under alkaline conditions (i.e., pH 8.0). The dominant mechanism was that the differences in the extent of electrostatic repulsion between sand grains and nTiO₂ with or without ILs at pH 6.5 were larger than that at pH 8.0. Moreover, two-site kinetic retention model and DLVO theory provided good descriptions for the transport behaviors of nTiO₂ with different ILs.

Advances in epitope molecularly imprinted polymers for protein detection: a review

Epitope molecularly imprinted polymers (EMIPs) are novel imprinted materials using short characteristic peptides as templates rather than entire proteins. To be specific, the amino acid sequence of the template peptide is the same as an exposed N- or C-terminus of a target protein, or its amino acid composition and sequence replicate a similar conformational arrangement as the same amino acid residues on the surface of the target protein. EMIPs have a good application prospect in protein research. Herein, we focus on classification of epitope imprinting techniques, methods of epitope immobilization on matrix materials including boronate affinity immobilization, covalent bonding immobilization, physical adsorption immobilization and metal ion chelation immobilization, and application of EMIPs in peptides, proteins, target imaging and target therapy fields. Finally, the main problems and future development are summarized.

Selective adsorption and enhanced photodegradation of diclofenac in water by molecularly imprinted TiO2

In the paper, molecularly imprinted TiO₂ was prepared by surface molecularly imprinted technology and liquid phase deposition method for preferential removal of persistent toxic pollutants from complex environmental water. Diclofenac was selected as the template molecule and target for photodegradation study. The characterization results of SEM, TEM, FTIR and XRD showed that the TiO₂ film with imprinted diclofenac was successfully synthesized on the surface of TiO₂ particles. Meanwhile, the adsorption and photodegradation experiments also indicated that the molecularly imprinted TiO₂ had larger adsorption capacity, better selectivity and higher photodegradation performance for diclofenac than non-imprinted TiO₂. The primary active species and degradation pathways during photodegradation process were also elucidated according to radical capture experiments and UPLC-MS-TOF technology. The prepared molecularly imprinted TiO₂ has the advantages of efficient removal ability, high stability and environmental protection, so it has a wide application value in water treatment and water environmental restoration, especially when involved persistent toxic pollutants.

Innovative utilization of molecular imprinting technology for selective adsorption and (photo)catalytic eradication of organic pollutants

The rapid development of industrialization and urbanization results in a numerous production of various organic chemicals to meet the increasing demand in high-quality life. During the synthesis and utilization of these chemical products, their residues unavoidably emerged in environments to severely threaten human's health. It is thus urgent to exploit effective technology for readily removing the organic pollutants with high selectivity and good reusability. As one of the most promising approaches, molecular imprinting technology (MIT) employs a chemically synthetic route to construct artificial recognition sites in highly-crosslinked matrix with complementary cavity and functional groups to target species, which have been attracting more and more interest for environmental remediation, such as the selective adsorption/separation and improved catalytic degradation of pollutants. In this review, MIT is first introduced briefly to understand their preparing process, recognition mechanism and common imprinted systems. Then, their specific binding affinities are demonstrated for selectively adsorbing and removing target molecules with a large capacity. Furthermore, the innovative utilization of MIT in catalytic eradication of pollutants is comprehensively overviewed to emphasize their enhanced efficiency and improved performances, which are classified by the used catalytically-active nanocrystals and imprinted systems. After summarizing recent advances in these fields, some limitations are discussed and possible suggestions are given to guide the future exploitation on MIT for environmental protection.

Preparation of TiO2 Nanoparticle Aggregates and Capsules by the ‘Two-Emulsion Method’

TiO2-based materials are of great practical interest in several technological areas. Both the size and the morphology of the TiO2 particles are of critical importance for their applications. The current study explores the effect of several factors on the outcome of the TiO2 particle synthesis via the so-called ‘two-emulsion method’. In this technique, two water-in-oil emulsions—each of them containing different reactant in the dispersed water drops—are mixed under well controlled conditions. Upon such mixing, partial coalescence of the water drops from the two emulsions leads to mixing of the drop content, with chemical reaction occurring within the drops, and to synthesis of Ti(OH)4 particles. Afterwards, the latter are transformed by emulsion heating into TiO2 particles and aggregates of predominantly anatase structure. Our results show that—depending on the precursor and surfactant concentrations, oil viscosity, emulsification time, and mixing speed—the obtained nanoparticles could aggregate either on the drop surface, forming capsules with a very smooth surface, or inside the water droplets, thus leading to hierarchically structured aggregates of micrometer size. The spherical smooth capsules are constructed of very small monodisperse TiO2 nanoparticles with size below 5 nm. The hierarchical bulk aggregates, on the other hand, are formed from bigger primary particles of sub-micrometer size. The obtained results show that one can obtain various TiO2 structures by controlling the conditions during the emulsion preparation and mixing

Theoretical research of molecular imprinted polymers formed from formaldehyde and methacrylic acid

In recent years, with the development of molecular imprinting technology, the imprinting sites, nature of imprinting, selection of functional monomers, cross-linking agents, solvents, and the optimization of the imprinting ratio are all the hot spots of researchers. In this work, the theoretical prediction of the self-assembly system of formaldehyde (HCHO) molecularly imprinted polymer was carried out by the B3LYP/6-31 G(d,p) method. The geometric configuration and active sites of the stable complex of HCHO and methacrylic acid (MAA) were analyzed. The selection of the imprinting ratios, cross-linking agents, and solvents was discussed. The topological properties of electron density of HCHO-MAA complex were considered by using the topological analysis method of chemical bond electron density based on valence bond theory. This study cannot only reveal the relationship between the imprinting mechanism of molecularly imprinted polymers and the molecular structure and properties of molecularly imprinted polymers but also provide valuable reference for the design and preparation of molecularly imprinted polymers.

Mechanism of nicotine degradation and adsorption by a nano-TiO2 engineered reduced graphene oxide composite in light variant conditions

Excellent nicotine degradation was demonstrated by the rGO–TiO₂ nanohybrid due to ROS generation under UV irradiation as well as nicotine adsorption on defective carbon rings of the rGO–TiO₂ nanohybrid in visible light.

Preparation of lysozyme-imprinted nanoparticles on polydopamine-modified titanium dioxide using ionic liquid as a stabilizer

Molecular imprinting of proteins has evolved into an efficient approach for protein recognition and separation. However, maintaining the structural stability of proteins during the preparation process of molecularly imprinted polymers (MIPs) remains challenging. Ionic liquids (ILs), being capable of maintaining the stability of proteins, might enable effective imprinting and accurate recognition of proteins. In this study, lysozyme (Lyz)-imprinted titanium dioxide (TiO₂) nanoparticles, TiO₂@Lyz-MIPs, have been successfully prepared for selective recognition and separation of Lyz. This was achieved by the free radical polymerization of hydroxyethyl acrylate (HEA) and poly(ethylene glycol) dimethacrylate (PEGDMA) on polydopamine (PDA)-modified TiO₂ nanoparticles using an IL, choline dihydrogen phosphate (chol dhp), as the stabilizer of Lyz. It was found that both PDA modification of TiO₂ and the use of chol dhp as stabilizer improved the adsorption capacity of TiO₂@Lyz-MIPs toward Lyz. When the concentration of HEA was 7 mg mL⁻¹, the ratio of monomer to crosslinker was 20 : 1, and the concentration of chol dhp was 12.5 mg mL⁻¹, the highest imprinting factor of 4.40 was achieved. TiO₂@Lyz-MIPs exhibited relatively high adsorption capacity with the maximum adsorption capacity up to 120 mg g⁻¹, which was more than four times higher than that of the non-imprinted polymers (NIPs) counterpart, TiO₂@Lyz-NIPs. The adsorption rate of Lyz by TiO₂@Lyz-MIPs was also much higher than that of TiO₂@Lyz-NIPs. TiO₂@Lyz-MIPs could successfully separate Lyz from diluted egg white, a complex mixture of proteins. Findings from this study indicate that effective recognition cavities toward Lyz were formed on the surface of Lyz-imprinted TiO₂ nanoparticles prepared using IL as the template stabilizer. This approach may facilitate the development of MIPs for efficient protein recognition and separation.

Molecular imprinting of proteins has evolved into an efficient approach for protein recognition and separation.