Immuno-probed graphene nanoplatelets on electrolyte-gated field-effect transistor for stable cortisol quantification in serum

Applications of Transistor-Based Biochemical Sensors

Transistor-based biochemical sensors feature easy integration with electronic circuits and non-invasive real-time detection. They have been widely used in intelligent wearable devices, electronic skins, and biological analyses and have shown broad application prospects in intelligent medical detection. Field-effect transistor (FET) sensors have high sensitivity, reasonable specificity, rapid response, and portability and provide unique signal amplification during biochemical detection. Organic field-effect transistor (OFET) sensors are lightweight, flexible, foldable, and biocompatible with wearable devices. Organic electrochemical transistor (OECT) sensors convert biological signals in body fluids into electrical signals for artificial intelligence analysis. In addition to biochemical markers in body fluids, electrophysiology indicators such as electrocardiogram (ECG) signals and body temperature can also cause changes in the current or voltage of transistor-based biochemical sensors. When modified with sensitive substances, sensors can detect specific analytes, improve sensitivity, broaden the detection range, and reduce the limit of detection (LoD). In this review, we introduce three kinds of transistor-based biochemical sensors: FET, OFET, and OECT. We also discuss the fabrication processes for transistor sources, drains, and gates. Furthermore, we demonstrated three sensor types for body fluid biomarkers, electrophysiology signals, and development trends. Transistor-based biochemical sensors exhibit excellent potential in multi-mode intelligent analysis and are good candidates for the next generation of intelligent point-of-care testing (iPOCT).

The Integration of Field Effect Transistors to Microfluidic Devices

Devices that integrate field effect transistors into microfluidic channels are becoming increasingly promising in the medical, environmental, and food realms, among other applications. The uniqueness of this type of sensor lies in its ability to reduce the background signals existing in the measurements, which interfere in obtaining good limits of detection for the target analyte. This and other advantages intensify the development of selective new sensors and biosensors with coupling configuration. This review work focused on the main advances in the fabrication and application of field effect transistors integrated into microfluidic devices as a way of identifying the potentialities that exist in these systems when used in chemical and biochemical analyses. The emergence of research on integrated sensors is not a recent study, although more recently the progress of these devices is more accentuated. Among the studies that used integrated sensors with electrical and microfluidic parts, those that investigated protein binding interactions seem to be the ones that expanded the most due, among other things, to the possibility of obtaining several physicochemical parameters involved in protein-protein interactions. Studies in this area have a great possibility of advancing innovations in sensors with electrical and microfluidic interfaces in new designs and applications.

SWCNT Network-FET Device for Human Serum Albumin Detection

A thin film of single-walled carbon nanotube (SWCNT) network field-effect transistor (FET) was fabricated by a simple, fast, and reliable deposition method for electronic applications. This study aims to develop a method for fabricating a thin film of random SWCNTs to be used as a transducer to detect human serum albumin (HSA) in biosensor applications. The random SWCNT network was deposited using the airbrush technique. The morphology of the CNT network was examined by utilising atomic force microscopy (AFM) and field-emission scanning electron microscopy (FESEM), while electrical characteristics were analysed using three-terminal IV measurements. The thin film (SWCNT network) was applied as a transducer to detect human serum albumin (HSA) based on its covalent interaction with antibodies. HSA plays a significant part in the physiological functions of the human body. The surface alteration of the SWCNTs was verified using Fourier transform infrared (FTIR) spectroscopy. Electrical current-voltage measurements validated the surface binding and HSA detection. The biosensor linearly recorded a 0.47 fg/mL limit of detection (LOD) and a high sensitivity of 3.44 μA (g/mL)^-1 between 1 fg/mL and 10 pg/mL. This device can also be used to identify a genuine HSA despite interference from other biomolecules (i.e., bovine serum albumin (BSA)), thus demonstrating the random SWCNT-FET immunosensor ability to quantify HSA in a complex biological environment.

Development of a Redox-Label-Doped Molecularly Imprinted Polymer on β-Cyclodextrin/Reduced Graphene Oxide for Electrochemical Detection of a Stress Biomarker

Cortisol is a major stress biomarker involved in the regulation of metabolic and immune responses. Readily accessible assays with sufficient quantitative and temporal resolution can assist in prevention, early diagnosis, and management of chronic diseases. Whereas conventional assays are costly in terms of time, labor, and capital, an electrochemical approach offers the possibility of miniaturization and detection at the point-of-care. Here, we investigate the biosensor application of molecularly imprinted polypyrrole (PPy) doped with hexacyanoferrate (HCF) and coupled to reduced graphene oxide functionalized with β-cyclodextrin (β-CD). β-CD provides an inclusion site for lipophilic cortisol and was electrochemically grafted simultaneous with reduction of GO. Next, PPy was electrochemically deposited in presence of cortisol template with HCF dopant ions serving as intrinsic redox probe. Thus, the sensor response was evaluated via changes of redox peak current in cyclic voltammetry and demonstrated a broad logarithmic detection range (5 pg/mL to 5000 ng/mL, R ² = 0.995), with a sensitivity of 8.809 μA log^-1 (ng/mL) cm^-2 and LOD of 19.3 pM. The sensor was shown to be specific toward cortisol in reference to salivary cortisol concentration in saliva over structural analogues. The sensor was exhibited to determine cortisol in artificial saliva at normal and elevated levels. The good performance and facile electrochemical fabrication of this antibody- and external label-free interface are promising for the development of affordable point-of-care biosensors.

A handheld testing device for the fast and ultrasensitive recognition of cardiac troponin I via an ion-sensitive field-effect transistor

Cardiac troponin I (cTnI) is an efficient and specific biomarker for the accurate diagnosis of acute myocardial infarction (AMI), one of the diseases with the highest mortality worldwide. Due to the short course and high fatality of this disease, a rapid, accurate and portable device for quantitative detection is urgently needed for early diagnosis and treatment. In this work, we designed a handheld device based on a dual-gate ion-sensitive field-effect transistor (ISFET) for early and accurate warning of AMI through cTnI detection. A one-step enzyme-linked immunosorbent assay strategy was proposed for use in this device to recognize trace cTnI in serum, converting the cTnI concentration to a drain-source current generated by an ultrasensitive ISFET. This portable device exhibited an ultrahigh sensitivity of 132 pA pg^-1·mL^-1, a wide linear range from 1 to 1000 pg/mL that enabled coverage far exceeding the threshold level (280 pg/mL), and a low detection limit of 0.3 pg/mL for the cTnI assay, which was much lower than the current diagnostic cut-off for a healthy control level for AMI (40 pg/mL). In addition, this handheld device showed satisfactory selectivity and reliable results in the analysis of real serum within 20 min, indicating its potential applications in early screening and diagnosis for the clinical evaluation of AMI.

Aptasensing luteinizing hormone to determine gynecological endocrine complications on graphene oxide layered sensor

Luteinizing hormone (LH)/lutropin is an interstitial cell-stimulating hormone playing a predominant role in the reproductive system, and highly correlated with the infertility treatment in both men and women. This research was concentrated to quantify LH level by using interdigitated electrode sensor. To improve the electric current flow, sensing electrode was modified with graphene oxide (GO) and the aptamer probe was attached on GO through biotin-streptavidin linker. Current responses were measured with aptamer-LH interaction at the target concentrations between 7.5 nM and 1 μM and the detection limit of LH was calculated as 60 nM with the determination coefficient (R² ) value, 0.9229 [y = 1.296x - 2.8435] on a linear range from 30 nM to 1 μM. Further, biofouling effect on sensing electrode surface was analyzed with complementary aptamer sequence, control proteins (albumin and globulin). The above GO-aptamer-modified interdigitated electrode sensor helps to quantify LH level and diagnose gynecological endocrinology-related complications.