Electrochemical behavior of heteroatom doped on reduced graphene oxide with RuO2 for HER, OER, and supercapacitor applications

Trace RuO2 nanoparticles loaded nickel-coated multi-walled carbon nanotubes to boost hydrogen evolution reaction under acidic and alkaline media

Developing low-cost catalysts with high activity for the Hydrogen Evolution Reaction (HER) is a main challenge to reduce the dependence on precious metals while maintaining the catalytic activity. In this study, nickel-plated multi-walled carbon nanotubes (Ni-MWCNTs) with a large number of active sites were selected, and Ni-MWCNTs electrocatalysts loaded with trace amounts of RuO2 nanoparticles were prepared by annealing treatment, which exhibited excellent HER performances in both acidic and alkaline media. The RuO2 nanoparticles loaded nickel-coated multi-walled carbon nanotubes (RuO2@Ni-MWCNTs) had a small electrochemical impedance spectrum (EIS) and a large electrochemically active surface area (ECSA). Notably, RuO2@Ni-MWCNTs with less than 1 % Ru content exhibited excellent catalytic activities in both acidic and alkaline solutions. The results showed that the overpotentials of RuO2@Ni-MWCNTs were 20.2 mV (alkaline) and 73.7 mV (acidic), respectively. After stabilization at 20 mA cm-2 for 90 h, the evaluation results showed that RuO2@Ni-MWCNTs could maintain their catalytic efficiency without significant degradation.

Rich oxygen vacancy and amorphous/crystalline ruthenium-doped CoCu -layered double hydroxide electrocatalysts for enhanced oxygen evolution reactions

Reinforcing the development of efficient and robust electrocatalysts is pivotal in addressing the challenges associated with oxygen evolution reactions (OER) in water splitting technology. Here, an amorphous/crystalline low-ruthenium-doped bimetallic layered double hydroxide (LDH) electrocatalyst (a/c-CoCu + Rux-LDH/NF) with massive oxygen vacancy on nickel foam was fabricated via ion-exchange and chemical etching, facilitating efficient OER. Among the various catalyst materials tested, the a/c-CoCu + Ru10-LDH/NF exhibits remarkable performance in the OER when employed in an alkaline electrolyte containing 1 M KOH. Achieving a minimal overpotential at 10 mA cm-2 of 214 mV, exhibiting a low Tafel slope value of 64.3 mV dec-1 and exceptional durability lasting for over 100 h. Theoretical calculations demonstrate that the electron structure and d-band center of CoCu-LDH can be effectively regulated through the utilization of a strategy possessing abundant oxygen vacancies and a Ru-doped crystalline/amorphous heterostructure. It will lead to optimized adsorption free energy of reactants and reduced energy barriers for OER. The construction strategy proposed in this paper for catalysts with amorphous/crystalline heterointerfaces offer a novel opportunity to achieve highly efficient OER.

Enabling efficient ample-level oxygen evolution on nickel-iron Prussian blue analogue/hydroxide via hierarchical mass transfer channel construction

Enhancing double-phase mass transfer capability and reducing overpotential at high currents are critical in the oxygen evolution reaction (OER) catalyst design. In this work, nickel-iron layered double hydroxide (NiFe-LDH) loaded on nickel foam (NF) was used as a self-sacrificing template for subsequent growth of nickel-iron Prussian blue (NiFe-PBA) hollow nanocubes on its sheet arrays. The triple-scale porous structure is therefore in-situ constructed in the produced NiFe-PBA@LDH/NF catalyst, where NiFe-PBA nanocubes, NiFe-LDH sheets and NF skeletons provide pores at hundred-nanometers, microns and hundred-microns, respectively. Due to the successful construction of hierarchical mass transfer channels in the catalyst, the overpotential required to deliver 1000 mA cm-2 OER is only 396 mV, which is 80 mV lower than that of NiFe-LDH/NF with a double-scale porous structure, manifesting the importance of the appropriate mass transfer channels, promoting the potential application of the NiFe-PBA@LDH/NF catalyst in industrial-scale electrolysers.