Dibutylamine (DBA): A highly efficient catalyst for the synthesis of pyrano[2,3-d]pyrimidine derivatives in aqueous media

N-nitrosamines in electroplating and printing/dyeing industrial wastewater treatment plants: Removal efficiency, environmental emission, and the influence on drinking water

The discharge of industrial wastewater containing high concentrations of N-nitrosamines to the aquatic environment can impair downstream source waters and pose potential risks to human health. However, the transport and fate of N-nitrosamines in typical industrial wastewater treatment plants (IWWTPs) and the influence of these effluents on source water and drinking water are still unclear. This study investigated nine N-nitrosamines in four full-scale electroplating (E-) and printing/dyeing (PD-) IWWTPs, two drinking water treatment plants (DWTPs) in the lower reaches of these IWWTPs, and the corresponding tap water in South China. The total concentrations of N-nitrosamines (∑NAs) were 382-10,600, 480-1920, 494-789, and 27.9-427 ng/L in influents, effluents, source water, and tap water, respectively. The compositions of N-nitrosamine species in different influents varied a lot, while N-nitrosodi-n-butylamine (NDBA) and N-nitrosodimethylamine (NDMA) dominated in most of the effluents, source water, and tap water. More than 70 % N-nitrosamines were removed by wastewater treatment processes used in E-IWWTPs such as ferric-carbon micro-electrolysis (Fe/C-ME), while only about 50 % of N-nitrosamines were removed in PD-IWWTPs due to the use of chlorine reagent or other inefficient conventional processes such as flocculation by cationic amine-based polymers or bio-contact oxidation. Therefore, the mass fluxes of N-nitrosamines discharged from these industrial wastewaters to the environment in the selected two industrial towns were up to 14,700 mg/day. The results based on correlation and principal component analysis significantly demonstrated correlations between E-and PD-effluents and source water and tap water, suggesting that these effluents can serve as sources of N-nitrosamines to local drinking water systems. This study suggests that N-nitrosamines are prevalent in typical IWWTPs, which may infect drinking water systems. The findings of this study provide a basis data for the scientific evaluation of environmental processes of N-nitrosamines.

Proflavine (PFH+): as a photosensitizer (PS) biocatalyst for the visible-light-induced synthesis of pyrano [2,3-d] pyrimidine scaffolds

A sustainable methodology for the synthesis of pyrano [2,3-d] pyrimidine scaffolds have been developed, employing the Knoevenagel-Michael tandem cyclocondensation reaction of barbituric acid/1,3-dimethylbarbituric acid, malononitrile, and aryl aldehydes. This study elucidates the advancement of a sustainable and environmentally conscious approach to synthesizing this category of chemical compounds. In the present investigation, a novel photosensitizer comprising proflavine (PFH+) bio-photocatalyst was employed in an aqueous medium, subjected to air atmosphere at room temperature, and stimulated by a blue-light-emitting diode (LED) to harness renewable energy. The fundamental objective of this initiative is to utilize a photosensitizer (PS) biocatalyst that has been recently developed, can be conveniently acquired, and is priced affordably. The proflavine (PFH+) photocatalyst, demonstrates the ability to initiate photoinduced-electron transfer (PET) through exposure to visible light. This property endows the photocatalyst with a practical and efficient method of achieving high effectiveness, energy efficiency, and environmentally friendly outcomes. The current research endeavor has the objective of examining the turnover number (TON) and turnover frequency (TOF) pertaining to pyrano [2,3-d] pyrimidine scaffolds. Moreover, it has been validated that cyclization at the gram-scale is a feasible approach that can be employed in various industrial settings.

Sustainable Green Synthesis of Pyrimidine Derivatives: Review on Multicomponent Synthesis, Catalysts and Techniques

"The founder of green chemistry explains how chemicals manufacturing must change to support a sustainable future." In this review, Green chemistry is considered in the synthesis of heterocycles compounds containing Pyrimidine nuclei using different catalyzes, solvents, and techniques for the synthesis of pyrimidine derivatives that achieve sustainability. The mentioned fused heterocycles are classified according to the type of ring system. The yield of the target molecules reported in the review is given in the reaction's last step.

3DPAFIPN as a halogenated dicyanobenzene-based photosensitizer catalyzed gram-scale photosynthesis of pyrano[2,3-d]pyrimidine scaffolds

Utilizing the Knoevenagel-Michael tandem cyclocondensation reaction of barbituric acid/1,3-dimethylbarbituric acid, malononitrile, and aryl aldehydes, a sustainable methodology for the photosynthesis of pyrano[2,3-d]pyrimidine scaffolds has been devised. The present study expounds on the development of a green radical synthetic approach toward this class of compounds. In this study, a novel halogenated dicyanobenzene-based photosensitizer was utilized in an aqueous solution, exposed to air at room temperature, and activated by a blue LED as a renewable energy source for the purpose of generating energy. The primary aim of this endeavor is to employ a recently developed, easily obtainable, and affordably priced halogenated cyanoarene-based donor-acceptor (D-A). The 3DPAFIPN [2,4,6-tris(diphenylamino)-5-fluoroisophthalonitrile]} photocatalyst, as a thermally activated delayed fluorescence (TADF), is capable of inducing single electron transfer (SET) upon irradiation with visible light, thereby offering a facile and efficient approach with a high degree of effectiveness, energy efficiency, and eco-friendliness. The aforementioned phenomenon facilitates the exploration of the temporal changes that have occurred in the interactions between the surroundings and chemical constituents. The present study aimed to investigate the turnover number (TON) and turnover frequency (TOF) for pyrano[2,3-d]pyrimidine scaffolds. Additionally, it has been demonstrated that gram-scale cyclization is a viable method for utilization in industrial applications.

Photochemical synthesis of pyrano[2,3-d]pyrimidine scaffolds using photoexcited organic dye, Na2 eosin Y as direct hydrogen atom transfer (HAT) photocatalyst via visible light-mediated under air atmosphere

The Knoevenagel-Michael cyclocondensation of barbituric acid/1,3-dimethylbarbituric acid, malononitrile, and arylaldehyde derivatives was used to construct a multicomponent green tandem method for the metal-free synthesis of pyrano[2,3-d]pyrimidine scaffolds. At room temperature in aqueous ethanol, photo-excited state functions generated from Na₂ eosin Y were employed as direct hydrogen atom transfer (HAT) catalysts by visible light mediated in the air atmosphere. This research looks towards expanding the use of a non-metallic organic dye that is both affordable and readily available. Because of its good yields, energy-effectiveness, high atom economy, time-saving qualities of the reaction, and operational simplicity, Na₂ eosin Y is photochemically produced with the least amount of a catalyst. As a result, various ecological and sustainable chemical properties are met. Surprisingly, such cyclization may be carried out on a gram scale, indicating the reaction's potential industrial application.

Importance of Hybrid Catalysts toward the Synthesis of 5H-Pyrano[2,3-d]pyrimidine-2-ones/2,4-diones (Thiones)

The pyranopyrimidine core is a key precursor for medicinal and pharmaceutical industries due to its broader synthetic applications as well as its bioavailability. Among its four possible isomers, we found that 5H-pyrano[2,3-d]pyrimidine scaffolds have a wide range of applicability, and in recent years, they have been intensively investigated, but the development of the main core is found to be more challenging due to its structural existence. In this review article, we cover all of the synthetic pathways that are employed for the development of substituted 4-aryl-octahydropyrano/hexahydrofuro[2,3-d]pyrimidin-2-one (thiones) and 5-aryl-substituted pyrano[2,3-d]pyrimidindione (2-thiones) derivatives through a one-pot multicomponent reaction using diversified hybrid catalysts such as organocatalysts, metal catalysts, ionic liquid catalysts, nanocatalysts, green solvents, catalyst-/solvent-free conditions, and miscellaneous catalysts as well as the mechanism and recyclability of the catalysts. This review mainly focuses on the application of hybrid catalysts (from 1992 to 2022) for the synthesis of 5H-pyrano[2,3-d]pyrimidine scaffolds. This review will definitely attract the world's leading researchers to utilize broader catalytic applications for the development of lead molecules.

A facile green synthesis of MgCoFe2O4 nanomaterials with robust catalytic performance in the synthesis of pyrano[2,3-d]pyrimidinedione and their bis-derivatives

In this study, an efficient, rapid and simple plant-mediated green sol-gel auto-combustion procedure was presented to synthesis magnesium-cobalt ferrite (MgCoFe₂O₄) nanocatalyst using an aqueous extract of apple skins as a chelating/combustion agent. The catalyst was assessed by multiple techniques, including FT-IR, XRD, FE-SEM, EDS, elemental mapping, TGA-DTA and VSM. Then, the catalytic potential of the as-prepared MgCoFe₂O₄ nanocatalyst was examined in the three-component condensation reaction of 1,3-dimethyl barbituric acid, aldehydes and malononitrile for the one-pot synthesis of pyrano[2,3-d]pyrimidinedione and their bis-derivatives. The obtained results indicated the excellent catalytic activity of the MgCoFe₂O₄ in the three-component reaction. The high catalytic activity of these nanomaterials could be attributed to the synergistic electronic effect between nanoparticles, which showcased the enormous potential of multi-metallic nanomaterials in the catalysis field. More importantly, MgCoFe₂O₄ showed excellent magnetic properties, and it could be successfully separated and recovered by applying an external magnetic for further reuses. To the best of our knowledge, green synthesis of MgCoFe₂O₄ mediated by aqueous plant extract was reported here for the first time, and this work, therefore, can open up a new insight in the course of design, green synthesis and application of excellent green nanocatalyst for the sustainable processes. MgCoFe₂O₄ as a magnetically recyclable heterogeneous catalyst, has been synthesized through plant-mediated procedure using an aqueous extract of apple skins.

Recent applications of barbituric acid in multicomponent reactions

This review aims to show representative examples of multicomponent reactions utilizing barbituric acid in the synthesis of various heterocyclic structures.