Esophageal tissue engineering: Current status and perspectives

Research on essential performance of oxidized chitosan-crosslinked acellular porcine aorta modified with bioactive SCPP/DOPA for esophageal scaffold with enhanced mechanical strength, biocompatibility and anti-inflammatory

Acellular porcine aorta (APA) is an excellent candidate for an implanted scaffold but needs to be modified with appropriate cross-linking agent to increase its mechanical property and storage time in vitro as well as to give itself some bioactivities and eliminate its antigenicity for acting as a novel esophageal prosthesis. In this paper, a polysaccharide crosslinker (oxidized chitosan, OCS) was prepared by oxidizing chitosan using NaIO₄ and further used to fix APA to prepare a novel esophageal prosthesis (scaffold). And then the surface modification with dopamine (DOPA) and strontium-doped calcium polyphosphate (SCPP) were performed one after another to prepare DOPA/OCS-APA and SCPP-DOPA/OCS-APA to improve the biocompatibility and inhibit inflammation of the scaffolds. The results showed that the OCS with a feeding ratio of 1.5:1.0 and a reaction time of 24 h had a suitable molecular weight and oxidation degree, almost no cytotoxicity and good cross-linking effect. Compared with glutaraldehyde (GA) and genipin (GP), OCS-fixed APA could provide a more suitable microenvironment for cell proliferation. The vital cross-linking characteristics and cytocompatibility of SCPP-DOPA/OCS-APA were evaluated. Results suggested that SCPP-DOPA/OCS-APA exhibited suitable mechanical properties, excellent resistance to enzymatic degradation/acid degradation, suitable hydrophilicity, and the ability to promote the proliferation of Human normal esophageal epithelial cells (HEECs) and inhibit inflammation in vitro. In vivo tests also confirmed that SCPP-DOPA/OCS-APA could diminish the immunological response to samples and had a positive impact on bioactivity and anti-inflammatory. In conclusion, SCPP-DOPA/OCS-APA could act as an effective, bioactive artificial esophageal scaffold and be expected to be used for clinical in the future.

Densified collagen tubular grafts for human tissue replacement and disease modelling applications

There is a significant need across multiple indications for an off-the-shelf bioengineered tubular graft which fulfils the mechanical and biological requirements for implantation and function but does not necessarily require cells for manufacture or deployment. Herein, we present a tissue-like tubular construct using a cell-free, materials-based method of manufacture, utilizing densified collagen hydrogel. Our tubular grafts are seamless, mechanically strong, customizable in terms of lumen diameter and wall thickness, and display a uniform fibril density across the wall thickness and along the tube length. While the method enables acellular grafts to be generated rapidly, inexpensively, and to a wide range of specifications, the cell-compatible densification process also enables a high density of cells to be incorporated uniformly into the walls of the tubes, which we show can be maintained under perfusion culture. Additionally, the method enables tubes consisting of distinct cell domains with cellular configurations at the boundaries which may be useful for modelling aortic disease. Further, we demonstrate additional steps which allow for luminal surface patterning. These results highlight the universality of this approach and its potential for developing the next generation of bioengineered grafts.

Predictive factors for the success of endoscopic dilation of esophageal caustic stricture: the experience of a French tertiary reference center

BACKGROUND

Predictors of the efficacy of endoscopic dilation for caustic esophageal stricture have been poorly studied.

METHODS

All patients undergoing an endoscopic dilation for an esophageal caustic stricture between 1990 and 2015 in a French national reference center were included. Success of dilation was defined by self-food autonomy without the need for reconstructive esophageal surgery.

RESULTS

During the study period, 894 patients were admitted after caustic ingestion. Among them, 101 patients developed esophageal stricture and 92 patients were eligible for analysis (missing data in 8 cases, 1 patient died before endoscopic dilation). In this cohort (median age 42 years, women 53%, strong alkali 74%, suicide attempt 77%, hydrostatic balloon use 93%), the overall success rate of dilation was 57% with a median number of 3 dilation sessions (274 sessions, range 1-17). Factors predicting the success of the procedure were: non-inflammatory stricture or non-inflammatory intercalated mucosa between stricture (88% vs 47%, p = 0.001), a single stricture versus 2 or more strictures (69% vs 47% vs 33%, respectively, p = 0.04), a stricture of less than 5 cm (70% vs 27%, p < 0.001) and the existence of mild/ moderately tight or very tight stricture (70% vs 21% of success, p < 0.001). Perforation rate was 6.5% (18/274) requiring emergency surgery in 2 cases.

CONCLUSION

Several characteristics of caustic esophageal strictures are significantly associated with the success rate of endoscopic dilation. Our data may be useful for customizing treatment strategies in patients with a caustic stricture.

Enhancing esophageal repair with bioactive bilayer mesh containing FGF

We aimed to prepare a bioactive and biodegradable bilayer mesh formed by fibroblast growth factor (FGF) loaded gelatin film layer, and poly ε-caprolactone (PCL) film layer, and to investigate its treatment efficacy on esophageal anastomosis. It is envisaged that the bioactive mesh in in vivo model would improve tissue healing in rats. The full thickness semicircular defects of 0.5 × 0.5 cm² were created in anterior walls of abdominal esophagus. The control group had abdominal esophagus isolated with distal esophageal blunt dissection, and sham group had primary anastomosis. In the test groups, the defects were covered with bilayer polymeric meshes containing FGF (5 μg/2 cm²), or not. All rats were sacrificed for histopathology investigation after 7 or 28 days of operation. The groups are coded as FGF(-)-7th day, FGF(+)-7th day, and FGF(+)-28th day, based on their content and operation day. Highest burst pressures were obtained for FGF(+)-7th day, and FGF(+)-28th day groups (p < 0.005) and decreased inflammation grades were observed. Submucosal and muscular collagen deposition scores were markedly increased in these groups compared to sham and FGF(-)-7th day groups having no FGF (p = 0.002, p = 0.001, respectively). It was proved that FGF loaded bioactive bilayer mesh provided effective repair, reinforcement and tissue healing of esophageal defects.

Esophagus tissue engineering: from decellularization to in vivo recellularization in two sites

To produce an esophageal scaffold with suitable features and evaluate the result of in vivo cell seeding after its implantation in the omentum and near its original anatomical position in the rat model. The esophagus of twelve rats were resected, cannulated, and decellularized via a peristaltic pump. After confirmation of decellularization and preservation of extracellular matrix, decellularized scaffolds were implanted either in the abdominal cavity (group I, n = 6) or cervical area (group II, n = 6). Histological evaluations were performed after 3 and 6 months of implantation. The results of histological evaluations, scanning electron microscopy, and the tensile test confirmed the maintenance of extracellular matrix and removal of all cellular constituents. At the time of biopsy, no evidence of inflammation was detected and the implanted scaffolds appeared normal. Histopathological evaluations of implanted tissues revealed that undifferentiated cells were seen in scaffolds of all follow-ups in both groups. Epithelial cell seeding was more advanced in biopsies of group II obtained after 6 months of operation and was accompanied by angiogenesis in surrounding adventitia. It seems that the implantation of scaffold near its original place may have an important role in further cell seeding. This method may be surpassing in comparison with traditional implantation techniques for perfecting esophageal transplantation.

Circumferential esophageal replacement by a decellularized esophageal matrix in a porcine model

BACKGROUND

Tissue engineering is an attractive alternative to conventional esophageal replacement techniques using intra-abdominal organs which are associated with a substantial morbidity. The objective was to evaluate the feasibility of esophageal replacement by an allogenic decellularized esophagus in a porcine model. Secondary objectives were to evaluate the benefit of decellularized esophagus recellularization with autologous bone marrow mesenchymal stromal cells and omental maturation of the decellularized esophagus.

METHODS

Eighteen pigs divided into 4 experimental groups according to mesenchymal stromal cells recellularization and omental maturation underwent a 5-cm long circumferential replacement of the thoracic esophagus. Turbo green florescent protein labelling was used for in vivo mesenchymal stromal cells tracking. The graft area was covered by a stent for 3 months. Clinical and histologic outcomes were analyzed over a 6-month period.

RESULTS

The median follow-up was 112 days [5; 205]. Two animals died during the first postoperative month, 2 experienced an anastomotic leakage, 13 experienced a graft area stenosis following stent migration of which 3 were sacrificed as initially planned after successful endoscopic treatment. The stent could be removed in 2 animals: the graft area showed a continuous mucosa without stenosis. After 3 months, the graft area showed a tissue specific regeneration with a mature epithelium and muscular cells. Clinical and histologic results were similar across experimental groups.

CONCLUSION

Circumferential esophageal replacement by a decellularized esophagus was feasible and allowed tissue remodeling toward an esophageal phenotype. We could not demonstrate any benefit provided by the omental maturation of the decellularized esophagus nor its recellularization with mesenchymal stromal cells.

A narrative review of esophageal tissue engineering and replacement: where are we?

Long-gap esophageal defects, whether congenital or acquired, are very difficult to manage. Any significant surgical peri-esophageal dissection that is performed to allow for potential stretching of two ends of a defect interrupts the esophageal blood supply and leads to complications such as leak and stricture, even in the youngest, healthiest patients. The term “congenital” applied to these defects refers mainly to long-gap esophageal atresia (LGA). Causes of acquired long-segment esophageal disruption include recurrent leaks and fistulae after primary repair, refractory GERD, caustic ingestions, cancer, and strictures. 5,000–10,000 patients per year in the US require esophageal replacement. Gastric, colonic, and jejunal pull-up surgeries are fraught with high rates of both short and long term complications thus creating a space for a better option. Since the 1970’s many groups around the world have been unsuccessfully attempting esophageal replacement with tissue-engineered grafts in various animal models. But, recent advances in these models are now combining novel technologic advances in materials bioscience, stem-cell therapies, and transplantation and are showing increasing promise to human translational application. Transplantation has been heretofore unsuccessful, but given modern improvements in transplant microsurgery and immunosuppressive medications, pioneering trials in animal models are being undertaken now. These rapidly evolving medical innovations will be reviewed here.

Esophageal defect repair by artificial scaffolds: a systematic review of experimental studies and proportional meta-analysis

BACKGROUND

The traditional technique of gastrointestinal reconstruction of the esophagus after esophagectomy presents plenty of complications. Hence, tissue engineering has been introduced as an effective artificial alternative with potentially fewer complications. Three types of esophageal scaffolds have been used in experimental studies so far. The aim of our meta-analysis is to present the postoperative outcomes after esophageal replacement with artificial scaffolds and the investigation of possible factors that affect these outcomes.

METHODS

The present proportional meta-analysis was designed using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses and A MeaSurement Tool to Assess systematic Reviews guidelines. We searched Medline, Scopus, Clinicaltrials.gov, EMBASE, Cochrane Central Register of Controlled Trials CENTRAL, and Google Scholar databases from inception until February 2020.

RESULTS

Overall, 32 studies were included that recruited 587 animals. The pooled morbidity after esophageal scaffold implantation was 53.4% (95% CI = 36.6-70.0%). The pooled survival interval was 111.1 days (95% CI = 65.5-156.8 days). Graft stenosis (46%), postoperative dysphagia (15%), and anastomotic leak (12%) were the most common complications after esophageal scaffold implantation. Animals that underwent an implantation of an artificial scaffold in the thoracic part of their esophagus presented higher survival rates than animals that underwent scaffold implantation in the cervical or abdominal part of their esophagus (P < 0.001 and P = 0.011, respectively).

CONCLUSION

Tissue engineering seems to offer an effective alternative for the repair of esophageal defects in animal models. Nevertheless, issues like graft stenosis and lack of motility of the esophageal scaffolds need to be addressed in future experimental studies before scaffolds can be tested in human trials.

Characterization of mesenchymal stem cells in patients with esophageal atresia

BACKGROUND

Preclinical studies demonstrate that tissue engineering and patient-derived stem cells can regenerate tissue. The goal of this study was to determine whether stem cells from esophageal atresia patients (EA) could be utilized for this purpose.

METHODS

Adipose tissue was obtained from control, esophageal atresia (EA) and long gap esophageal atresia (LGEA) patients. Mesenchymal stem cells (MSCs) were isolated, expanded, characterized and seeded onto tubular scaffolds for 6 days. Scaffolds were characterized for viability, gene expression and cytokine production.

RESULTS

The average weight of tissue from the EA and LGEA patients was 145.8mg compared to 2981 mg in controls. Despite the small amount of tissue obtained from neonatal patients, cells were expanded to cover a scaffold. After incubating 6 days on the scaffold, cells were viable and proliferating with differences in gene expression between groups. VEGFA production in the supernatant was increased in EA and LGEA patients; while IL6 production was significantly increased in the control patients.

CONCLUSIONS

This study demonstrates the ability to utilize small amounts of adipose tissue from esophageal atresia patients as a cell source for regenerative medicine. Future studies will focus on use of these cells for tissue regeneration in vivo.

Trends in 3D bioprinting for esophageal tissue repair and reconstruction

In esophageal pathologies, such as esophageal atresia, cancers, caustic burns, or post-operative stenosis, esophageal replacement is performed by using parts of the gastrointestinal tract to restore nutritional autonomy. However, this surgical procedure most often does not lead to complete functional recovery and is instead associated with many complications resulting in a decrease in the quality of life and survival rate. Esophageal tissue engineering (ETE) aims at repairing the defective esophagus and is considered as a promising therapeutic alternative. Noteworthy progress has recently been made in the ETE research area but strong challenges remain to replicate the structural and functional integrity of the esophagus with the approaches currently being developed. Within this context, 3D bioprinting is emerging as a new technology to facilitate the patterning of both cellular and acellular bioinks into well-organized 3D functional structures. Here, we present a comprehensive overview of the recent advances in tissue engineering for esophageal reconstruction with a specific focus on 3D bioprinting approaches in ETE. Current biofabrication techniques and bioink features are highlighted, and these are discussed in view of the complexity of the native esophagus that the designed substitute needs to replace. Finally, perspectives on recent strategies for fabricating other tubular organ substitutes via 3D bioprinting are discussed briefly for their potential in ETE applications.

Scaffold-Free Bio-3D Printing Using Spheroids as "Bio-Inks" for Tissue (Re-)Construction and Drug Response Tests

In recent years, scaffold-free bio-3D printing using cell aggregates (spheroids) as "bio-inks" has attracted increasing attention as a method for 3D cell construction. Bio-3D printing uses a technique called the Kenzan method, wherein spheroids are placed one-by-one in a microneedle array (the "Kenzan") using a bio-3D printer. The bio-3D printer is a machine that was developed to perform bio-3D printing automatically. Recently, it has been reported that cell constructs can be produced by a bio-3D printer using spheroids composed of many types of cells and that this can contribute to tissue (re-)construction. This progress report summarizes the production and effectiveness of various cell constructs prepared using bio-3D printers. It also considers the future issues and prospects of various cell constructs obtained by using this method for further development of scaffold-free 3D cell constructions.

Successful muscle regeneration by a homologous microperforated scaffold seeded with autologous mesenchymal stromal cells in a porcine esophageal substitution model

BACKGROUND

Since the esophagus has no redundancy, congenital and acquired esophageal diseases often require esophageal substitution, with complicated surgery and intestinal or gastric transposition. Peri-and-post-operative complications are frequent, with major problems related to the food transit and reflux. During the last years tissue engineering products became an interesting therapeutic alternative for esophageal replacement, since they could mimic the organ structure and potentially help to restore the native functions and physiology. The use of acellular matrices pre-seeded with cells showed promising results for esophageal replacement approaches, but cell homing and adhesion to the scaffold remain an important issue and were investigated.

METHODS

A porcine esophageal substitute constituted of a decellularized scaffold seeded with autologous bone marrow-derived mesenchymal stromal cells (BM-MSCs) was developed. In order to improve cell seeding and distribution throughout the scaffolds, they were micro-perforated by Quantum Molecular Resonance (QMR) technology (Telea Electronic Engineering).

RESULTS

The treatment created a microporous network and cells were able to colonize both outer and inner layers of the scaffolds. Non seeded (NSS) and BM-MSCs seeded scaffolds (SS) were implanted on the thoracic esophagus of 4 and 8 pigs respectively, substituting only the muscle layer in a mucosal sparing technique. After 3 months from surgery, we observed an esophageal substenosis in 2/4 NSS pigs and in 6/8 SS pigs and a non-practicable stricture in 1/4 NSS pigs and 2/8 SS pigs. All the animals exhibited a normal weight increase, except one case in the SS group. Actin and desmin staining of the post-implant scaffolds evidenced the regeneration of a muscular layer from one anastomosis to another in the SS group but not in the NSS one.

CONCLUSIONS

A muscle esophageal substitute starting from a porcine scaffold was developed and it was fully repopulated by BM-MSCs after seeding. The substitute was able to recapitulate in shape and function the original esophageal muscle layer.

A clinical-grade acellular matrix for esophageal replacement

In pathologies of the esophagus such as esophageal atresia, cancers, and caustic injuries, methods for full thickness esophageal replacement require the sacrifice of healthy intra-abdominal organs such as the stomach and the colon and are associated with high morbidity, mortality, and poor functional results. To overcome these problems, tissue engineering methods are developed to create a substitute with scaffolds and cells. The aim of this study was to develop a simple and safe decellularization process in order to obtain a clinical grade esophageal extracellular matrix. Following the decontamination step, porcine esophagi were decellularized in a bioreactor with sodium dodecyl sulfate and ethylenediaminetetraacetic acid for 3 days and were rinsed with deionized water. DNA was eliminated by a 3-hr DNase treatment. To remove any residual detergent, the matrix was then incubated with an absorbing resin. The resulting porcine esophageal matrix was characterized by the assessment of the efficiency of the decellularization process (DNA quantification), evaluation of sterility and absence of cytotoxicity, and its composition and biomechanical properties, as well as the possibility to be reseeded with mesenchymal stem cells. Complete decellularization with the preservation of the general structure, composition, and biomechanical properties of the native esophageal matrix was obtained. Sterility was maintained throughout the process, and the matrix showed no cytotoxicity. The resulting matrix met clinical grade criteria and was successfully reseeded with mesenchymal stem cells..

Polyurethane scaffolds seeded with autologous cells can regenerate long esophageal gaps: An esophageal atresia treatment model

BACKGROUND

Pediatric patients suffering from long gap esophageal defects or injuries are in desperate need of innovative treatment options. Our study demonstrates that two different cell sources can adhere to and proliferate on a retrievable synthetic scaffold. In feasibility testing of translational applicability, these cell seeded scaffolds were implanted into piglets and demonstrated esophageal regeneration.

METHODS

Either porcine esophageal epithelial cells or porcine amniotic fluid was obtained and cultured in 3 dimensions on a polyurethane scaffold (Biostage). The amniotic fluid was obtained prior to birth of the piglet and was a source of mesenchymal stem cells (AF-MSC). Scaffolds that had been seeded were implanted into their respective Yucatan mini-swine. The cell seeded scaffolds in the bioreactor were evaluated for cell viability, proliferation, genotypic expression, and metabolism. Feasibility studies with implantation evaluated tissue regeneration and functional recovery of the esophagus.

RESULTS

Both cell types seeded onto scaffolds in the bioreactor demonstrated viability, adherence and metabolism over time. The seeded scaffolds demonstrated increased expression of VEGF after 6 days in culture. Once implanted, endoscopy 3 weeks after surgery revealed an extruded scaffold with newly regenerated tissue. Both cell seeded scaffolds demonstrated epithelial and muscle regeneration and the piglets were able to eat and grow over time.

CONCLUSIONS

Autologous esophageal epithelial cells or maternal AF-MSC can be cultured on a 3D scaffold in a bioreactor. These cells maintain viability, proliferation, and adherence over time. Implantation into piglets demonstrated esophageal regeneration with extrusion of the scaffold. This sets the stage for translational application in a neonatal model of esophageal atresia.

Regeneration of esophagus using a scaffold-free biomimetic structure created with bio-three-dimensional printing

Various strategies have been attempted to replace esophageal defects with natural or artificial substitutes using tissue engineering. However, these methods have not yet reached clinical application because of the high risks related to their immunogenicity or insufficient biocompatibility. In this study, we developed a scaffold-free structure with a mixture of cell types using bio-three-dimensional (3D) printing technology and assessed its characteristics in vitro and in vivo after transplantation into rats. Normal human dermal fibroblasts, human esophageal smooth muscle cells, human bone marrow-derived mesenchymal stem cells, and human umbilical vein endothelial cells were purchased and used as a cell source. After the preparation of multicellular spheroids, esophageal-like tube structures were prepared by bio-3D printing. The structures were matured in a bioreactor and transplanted into 10-12-week-old F344 male rats as esophageal grafts under general anesthesia. Mechanical and histochemical assessment of the structures were performed. Among 4 types of structures evaluated, those with the larger proportion of mesenchymal stem cells tended to show greater strength and expansion on mechanical testing and highly expressed α-smooth muscle actin and vascular endothelial growth factor on immunohistochemistry. Therefore, the structure with the larger proportion of mesenchymal stem cells was selected for transplantation. The scaffold-free structures had sufficient strength for transplantation between the esophagus and stomach using silicon stents. The structures were maintained in vivo for 30 days after transplantation. Smooth muscle cells were maintained, and flat epithelium extended and covered the inner surface of the lumen. Food had also passed through the structure. These results suggested that the esophagus-like scaffold-free tubular structures created using bio-3D printing could hold promise as a substitute for the repair of esophageal defects.

Circumferential Esophageal Replacement by a Tissue-engineered Substitute Using Mesenchymal Stem Cells: An Experimental Study in Mini Pigs

Tissue engineering appears promising as an alternative technique for esophageal replacement. Mesenchymal stem cells (MSCs) could be of interest for esophageal regeneration. Evaluation of the ability of an acellular matrix seeded with autologous MSCs to promote tissue remodeling toward an esophageal phenotype after circumferential replacement of the esophagus in a mini pig model. A 3 cm long circumferential replacement of the abdominal esophagus was performed with an MSC-seeded matrix (MSC group, n = 10) versus a matrix alone (control group, n = 10), which has previously been matured into the great omentum. The graft area was covered with an esophageal removable stent. A comparative histological analysis of the graft area after animals were euthanized sequentially is the primary outcome of the study. Histological findings after maturation, overall animal survival, and postoperative morbidity were also compared between groups. At postoperative day 45 (POD 45), a mature squamous epithelium covering the entire surface of the graft area was observed in all the MSC group specimens but in none of the control group before POD 95. Starting at POD 45, desmin positive cells were seen in the graft area in the MSC group but never in the control group. There were no differences between groups in the incidence of surgical complications and postoperative death. In this model, MSCs accelerate the mature re-epitheliazation and early initiation of muscle cell colonization. Further studies will focus on the use of cell tracking tools in order to analyze the becoming of these cells and the mechanisms involved in this tissue regeneration.

Regenerative medicine for the esophagus

Advances in tissue engineering techniques have made it possible to use human cells as biological material. This has enabled pharmacological studies to be conducted to investigate drug effects and toxicity, to clarify the mechanisms underlying diseases, and to elucidate how they compensate for impaired organ function. Many researchers have tried to construct artificial organs using these techniques, but none has succeeded in growing a whole organ. Unlike other digestive organs with complicated functions, such as the processing and absorption of nutrients, the esophagus has the relatively simple function of transporting content, which can be replicated easily by a substitute. In regenerative medicine, various combinations of materials have been applied, including scaffolding, cell sources, and bioreactors. Exciting results of tissue engineering techniques for the esophagus have been reported. In animal models, replacing full-thickness and full-circumferential defects remains challenging because of stenosis and leakage after implantation. Although many reports have manipulated various scaffolds, most have emphasized the importance of both epithelial and mesenchymal cells for the prevention of stenosis. However, the results of repair of partial full-thickness defects and mucosal defects have been promising. Two successful approaches for the replacement of mucosal defects in a clinical setting have been reported, although in contrast to the many animal models, there are few pilot studies in humans. We review the recent results and evaluate the future of regenerative medicine for the esophagus.