Modification of physicochemical and mechanical properties of a new bio-based gelatin composite films through composition adjustment and instantizing process

Green Chemistry to Modify Functional Properties of Crambe Protein Isolate-Based Thermally Formed Films

Proteins are promising precursors to be used in production of sustainable materials with properties resembling plastics, although protein modification or functionalization is often required to obtain suitable product characteristics. Here, effects of protein modification were evaluated by crosslinking behavior using high-performance liquid chromatography (HPLC), secondary structure using infrared spectroscopy (IR), liquid imbibition and uptake, and tensile properties of six crambe protein isolates modified in solution before thermal pressing. The results showed that a basic pH (10), especially when combined with the commonly used, although moderately toxic, crosslinking agent glutaraldehyde (GA), resulted in a decrease in crosslinking in unpressed samples, as compared to acidic pH (4) samples. After pressing, a more crosslinked protein matrix with an increase in β-sheets was obtained in basic samples compared to acidic samples, mainly due to the formation of disulfide bonds, which led to an increase in tensile strength, and liquid uptake with less material resolved. A treatment of pH 10 + GA, combined either with a heat or citric acid treatment, did not increase crosslinking or improve the properties in pressed samples, as compared to pH 4 samples. Fenton treatment at pH 7.5 resulted in a similar amount of crosslinking as the pH 10 + GA treatment, although with a higher degree of peptide/irreversible bonds. The strong bond formation resulted in lack of opportunities to disintegrate the protein network by all extraction solutions tested (even for 6 M urea + 1% sodium dodecyl sulfate + 1% dithiothreitol). Thus, the highest crosslinking and best properties of the material produced from crambe protein isolates were obtained by pH 10 + GA and pH 7.5 + Fenton, where Fenton is a greener and more sustainable solution than GA. Therefore, chemical modification of crambe protein isolates is effecting both sustainability and crosslinking behavior, which might have an effect on product suitability.

Chitosan-Sodium Caseinate Composite Edible Film Incorporated with Probiotic Limosilactobacillus fermentum: Physical Properties, Viability, and Antibacterial Properties

Single-use synthetic plastics that are used as food packaging is one of the major contributors to environmental pollution. Hence, this study aimed to develop a biodegradable edible film incorporated with Limosilactobacillus fermentum. Investigation of the physical and mechanical properties of chitosan (CS), sodium caseinate (NaCas), and chitosan/sodium caseinate (CS/NaCas) composite films allowed us to determine that CS/NaCas composite films displayed higher opacity (7.40 A/mm), lower water solubility (27.6%), and higher Young's modulus (0.27 MPa) compared with pure CS and NaCas films. Therefore, Lb. fermentum bacteria were only incorporated in CS/NaCas composite films. Comparison of the physical and mechanical properties of CS/NaCas composite films incorporated with bacteria with those of control CS/NaCas composite films allowed us to observe that they were not affected by the addition of probiotics, except for the flexibility of films, which was improved. The Lb. fermentum incorporated composite films had a 0.11 mm thickness, 17.9% moisture content, 30.8% water solubility, 8.69 A/mm opacity, 25 MPa tensile strength, and 88.80% elongation at break. The viability of Lb. fermentum after drying the films and the antibacterial properties of films against Escherichia coli O157:H7 and Staphylococcus aureus ATCC 29213 were also evaluated after the addition of Lb. fermentum in the composite films. Dried Lb. fermentum composite films with 6.65 log₁₀ CFU/g showed an inhibitory effect against E. coli and S. aureus (0.67 mm and 0.80 mm inhibition zone diameters, respectively). This shows that the Lb.-fermentum-incorporated CS/NaCas composite film is a potential bioactive packaging material for perishable food product preservation.

Functional Properties of Gelatin/Polyvinyl Alcohol Films Containing Black Cumin Cake Extract and Zinc Oxide Nanoparticles Produced via Casting Technique

This study aimed to develop and characterize gelatin/polyvinyl alcohol (G/PVA) films loaded with black cumin cake extract (BCCE) and zinc oxide nanoparticles (ZnONPs). The BCCE was also applied for the green synthesis of ZnONPs with an average size of less than 100 nm. The active films were produced by a solvent-casting technique, and their physicochemical and antibacterial properties were investigated. Supplementation of G/PVA film in ZnONPs decreased the tensile strength (TS) from 2.97 MPa to 1.69 MPa. The addition of BCCE and ZnONPs increased the elongation at the break (EAB) of the enriched film by about 3%. The G/PVA/BCCE/ZnONPs film revealed the lowest water vapor permeability (WVP = 1.14 × 10-9 g·mm·Pa-1·h-1·mm-2) and the highest opacity (3.41 mm-1). The QUick, Easy, New, CHEap and Reproducible (QUENCHER) methodologies using 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2'-azino-bis(3-ethylbenzothiazoline-6- sulfonic acid) (ABTS) and cupric ion reducing antioxidant capacity (CUPRAC) were applied to measure antioxidant capacity (AC) of the prepared films. The incorporation of BCCE and ZnONPs into G/PVA films enhanced the AC by 8-144%. The films containing ZnONPs and a mixture of BCCE and ZnONPs inhibited the growth of three Gram-positive bacterial strains. These nanocomposite films with desired functional properties can be recommended to inhibit microbial spoilage and oxidative rancidity of packaged food.

Vegan Egg: A Future-Proof Food Ingredient?

Vegan eggs are designed with the aim to provide a healthier and more sustainable alternative to regular eggs. The major drivers of this industry are the increasing prevalence of egg allergies, awareness towards environmental sustainability, and the shift to vegan diets. This study intends to discuss, for the first time, the vegan egg market, including their formulation, nutritional aspects, and some applications (i.e., mayonnaise and bakery products). Recreating the complete functionality of eggs using plant-based ingredients is very challenging due to the complexity of eggs. Current, but scarce, research in this field is focused on making mixtures of plant-based ingredients to fit specific food formulations. Nutritionally, providing vegan eggs with similar or higher nutritional value to that of eggs can be of relevance to attract health-conscious consumers. Claims such as clean labels, natural, vegan, animal-free, gluten-free, and/or cholesterol-free can further boost the position of vegan eggs in the market in the coming year. At present, this market is still in its infancy stages, and clear regulations of labeling, safety, and risk assessment are deemed mandatory to organize the sector, and protect consumers.