Microwave-assisted extraction of carotenoids from carrot juice processing waste using flaxseed oil as a solvent

Elevated temperature extraction of β-carotene from freeze-dried carrot powder into sunflower oil: Extraction kinetics and thermal stability

β-Carotene, a precursor of vitamin A, can alleviate the deficiency of this vitamin prevalent worldwide. Earlier research studies have addressed the extraction of β-carotene at relatively low temperatures (up to 70°C) due to its perceived instability at higher temperatures, as a result of which extraction rates recorded are relatively low. This study models the net rate of β-carotene extraction by considering both extraction and degradation kinetics. The model developed, which accounts for degradation occurring in solid and extract phases, has been experimentally validated for the extraction of β-carotene from freeze-dried carrot powder into sunflower oil over a range of temperatures 90-150°C. This study also gives insights into the application of sunflower oil as a carrier for β-carotene during cooking and food processing, by monitoring and modeling the thermal degradation and isomerization of β-carotene at temperatures up to 220°C. The modeling of extraction kinetics shows that it is possible to achieve viable extraction rates by employing temperatures in the range (90-150°C) for relatively short times (<5 min). The degradation kinetics shows that almost 75% of the β-carotene can survive heating at 180°C for 10 min-indicating the possibility of using β-carotene enriched edible oils for frying. This study also reports on the formation of three isomers of β-carotene identified using HPLC: trans-, 9-cis, and 13-cis. The reaction network model developed in this study was able to account for the transient variation of the concentration of all three isomers. PRACTICAL APPLICATION: β-Carotene is a precursor of vitamin A and its consumption can potentially alleviate the deficiency of this vitamin prevalent worldwide. This study validates a model for the extraction of β-carotene in sunflower oil, which takes into account extraction as well as degradation occurring during extraction, so that a rational method is available for the design of efficient extractors for this purpose. This paper also establishes the thermal stability of β-carotene under frying conditions by quantifying its thermal degradation as well as isomerization.

Green Solvents for Extraction of Natural Food Colorants from Plants: Selectivity and Stability Issues

Consumers associate the color of food with its freshness and quality. More and more attention is being paid to natural colorants that bring additional health benefits to humans. Such natural substances are the carotenoids (yellow to orange), the anthocyanins (red to blue), and the betalains (red and yellow), which are very sensitive to exposure to light, air, high temperatures, and chemicals. Stability and diversity in terms of color can be optimized by using environmentally friendly and selective extraction processes that provide a balance between efficacy, safety, and stability of the resulting extracts. Green solvents like water, supercritical fluids, natural deep eutectic solvents, and ionic liquids are the most proper green solvents when combined with different extraction techniques like maceration, supercritical extraction, and ultrasound-assisted or microwave-assisted extraction. The choice of the right extracting agent is crucial for the selectivity of the extraction method and the stability of the prepared colorant. The present work reviews the green solvents used for the extraction of natural food colorants from plants and focuses on the issues related to the selectivity and stability of the products extracted.

Sustainable Green Extraction of Carotenoid Pigments: Innovative Technologies and Bio-Based Solvents

Carotenoids are ubiquitous and versatile isoprenoid compounds. The intake of foods rich in these pigments is often associated with health benefits, attributable to the provitamin A activity of some of them and different mechanisms. The importance of carotenoids and their derivatives for the production of foods and health-promotion through the diet is beyond doubt. In the new circular economy paradigm, the recovery of carotenoids in the biorefinery process is highly desirable, for which greener processes and solvents are being advocated for, considering the many studies being conducted at the laboratory scale. This review summarizes information on different extraction technologies (ultrasound, microwaves, pulsed electric fields, pressurized liquid extraction, sub- and supercritical fluid extraction, and enzyme-assisted extraction) and green solvents (ethyl lactate, 2-methyltetrahydrofuran, natural deep eutectic solvents, and ionic liquids), which are potential substitutes for more toxic and less environmentally friendly solvents. Additionally, it discusses the results of the latest studies on the sustainable green extraction of carotenoids. The conclusions drawn from the review indicate that while laboratory results are often promising, the scalability to real industrial scenarios poses a significant challenge. Furthermore, incorporating life cycle assessment analyses is crucial for a comprehensive evaluation of the sustainability of innovative extraction processes compared to industry-standard methods.

Enhancement of the bioavailability of phenolic compounds from fruit and vegetable waste by liposomal nanocarriers

Fruits and vegetables are one of the most consumed and processed commodities globally and comprise abundant phenolic compounds, one of the main nutraceuticals in the food industry. Comparably elevated rates of these compounds are found in waste (peel, seeds, leaf, stem, etc.) in the food processing industry. They are being investigated for their potential use in functional foods. However, phenolic compounds' low bioavailability limits their application, which can be approached by loading the phenolic compounds into an encapsulation system such as liposomal carriers. This review aims to elucidate the recent trend in extracting phenolic compounds from the waste stream and the means to load them in stable liposomes. Furthermore, the application of these liposomes with only natural extracts in food matrices is also presented. Many studies have indicated that liposomes can be a proper candidate for encapsulating and delivering phenolic compounds and as a means to increase their bioavailability.

Response Surface Methodology to Optimize the Extraction of Carotenoids from Horticultural By-Products-A Systematic Review

Response Surface Methodology (RSM) is a widely used mathematical tool for process optimization, setting their main factorial variables. The current research analyzes and summarizes the current knowledge about the RSM in the extraction of carotenoids from fruit and vegetable by-products, following a systematic review protocol (Prisma 2020 Statement). After an identification of manuscripts in Web of Science (September 2023) using inclusion search terms ("carotenoids", "extraction", "response-surface methodology", "ultrasound", "microwave" and "enzyme"), they were screened by titles and abstracts. Finally, 29 manuscripts were selected according to the PRISMA methodology (an evidence-based minimum set of items for reporting in systematic reviews), then, 16 questions related to the quality criteria developed by authors were applied. All studies were classified as having an acceptable level of quality criteria (≤50% "yes answers"), with four of them reaching a moderate level (>50 to ≤70% "yes answers"). No studies were cataloged as complete (>70% "yes answers"). Most studies are mainly focused on ultrasound-assisted extraction, which has been widely developed compared to microwave or enzymatic-assisted extractions. Most evidence shows that it is important to provide information when RSM is applied, such as the rationale for selecting a particular design, the specification of input variables and their potential levels, a discussion on the statistical model's validity, and an explanation of the optimization procedure. In addition, the principles of open science, specifically data availability, should be included in future scientific manuscripts related to RSM and revalorization.

Unleashing the bioactive potential of Capsicum chinense cv Bhut Jolokia: a comparison of microwave- and ultrasound-mediated extraction techniques for lipophilic capsaicin

This study investigated the extraction of capsaicin from Capsicum chinense cv Bhut Jolokia using rice bran oil (RBO) as a 'green solvent' via microwave- and ultrasound-mediated techniques (MME and UME) as an alternative to hazardous organic solvents. Extraction conditions were optimised using MME at 180 and 300 W for 2 and 8 min and UME at 300 and 400 W for 10 and 30 min. The maximum capsaicin yield obtained was 12.47 mg/mL, with a corresponding gamma oryzanol content of 8.46 mg/mL. The peroxide value of the extract (capsaicin-infused RBO) was found to be within permissible limits as per Codex Alimentarius specifications. Results strongly suggest the potential of RBO as a novel solvent for extraction of capsaicin. The capsaicin-enriched oil can be used as a functional food ingredient due to its health-promoting properties.

Sustainable Nonfarm Approaches to Achieve Zero Hunger and Its Unveiled Reality

Millions of people worldwide are deprived of sufficient, safe, and nutritious food required for an everyday and healthy life. The hunger crisis is worsening over time, even though many attempts have been made to minimize it. Increasing world population and competition for natural resources, climate change, natural disasters, urbanization, poverty, and illiteracy are the main causes that need to be addressed to reduce the hunger crisis. Various nonfarm technologies are being used to eradicate hunger but their long-term impact on the environment should also be considered. The real sustainability of several novel technologies being implemented to deal with hunger is an issue to tackle. This paper discusses the potential applications of storage facilities, underutilized crops, waste valorization, food preservation, nutritionally enriched novel food products, and technological advancement in food processing to achieve zero hunger. An attempt has also been made to address the sustainability of various nonfarm technology utilized to minimize the global hunger crisis.

Quality Evaluation of Hainan Robusta Coffee Bean Oil Produced by Ultrasound Coupled with Coconut Oil Extraction

This study investigates the treatment of coconut oil using thermosonic treatment in combination with green coffee beans. Under a defined ratio of coconut oil to green coffee beans, the effect of different thermosonic time on the quality parameters, active substance content, antioxidant capacity, and thermal oxidative stability of coconut oil were investigated as a strategy to potentially improve the quality of oil. Results showed that the β-sitosterol content of CCO (coconut coffee oil) treated with the thermal method combined with green coffee bean treatment reached up to 393.80 ± 11.13 mg/kg without affecting the lipid structure. In addition, DPPH clearance equivalents increased from 5.31 ± 1.30 mg EGCG/g to 71.34 ± 0.98 mg EGCG/g, and the ABTS clearance equivalent was 45.38 ± 0.87 mg EGCG/g versus 0 for the untreated sample. The improvement in thermal oxidation stability of treated coconut oil is also significant. The TG (Thermogravimetry) onset temperature was elevated from 277.97 °C to 335.08 °C and the induction time was elevated up to 24.73 ± 0.41 h from 5.17 ± 0.21 h. Thermosonic treatment in combination with green coffee beans is an ideal option to improve the quality of coconut oil. The results of this article provide new ideas for the development of plant-blended oil products and the new utilization of coconut oil and coffee beans.

Development and Characterization of Yellow Passion Fruit Peel Flour (Passiflora edulis f. flavicarpa)

In this study, the peels of the yellow passion fruit (Passiflora edulis f. flavicarpa) were used to develop a flour that was evaluated in terms of its physicochemical, microscopic, colorimetric, and granulometric characteristics, its total phenolic compound and carotenoid contents, and its antioxidant capacity. Fourier Transform Infrared (FTIR) spectroscopy measurements were employed to investigate the constituent functional groups, compounds' chemical profiles were assessed by Paper Spray Mass Spectrometry (PS-MS), and the compound's chemical profiles were evaluated by Ultra-Performance Liquid Chromatography (UPLC). This flour presented a light color, heterogeneous granulometry, high carbohydrate, carotenoid, and total phenolic compound contents with high antioxidant capacity. Scanning Electron Microscopy (SEM) showed a particulate flour, which is supposed to contribute to its compactness. FTIR demonstrated the presence of functional groups corresponding to cellulose, hemicellulose, and lignin, constituents of insoluble dietary fiber. The PS-MS analysis suggested the presence of 22 substances, covering diverse component classes such as organic, fatty, and phenolic acids, flavonoids, sugars, quinones, phenylpropanoid glycerides terpenes, and amino acids. This research demonstrated the potential of using Passion Fruit Peel Flour (PFPF) as an ingredient for food products. The advantages of using PFPF comprise the reduction of agro-industrial waste, contribution to the development of a sustainable food system, and increment of food products' functional profile. Moreover, its high content of several bioactive compounds can benefit consumers' health.

A review on the emerging conversion technology of cellulose, starch, lignin, protein and other organics from vegetable-fruit-based waste

A large amount of vegetable-fruit-based waste (VFBW) belonging to agricultural waste is produced around the world every year, imposing a huge burden on the environment and sustainable development. VFBW contains a lot of water and useful organic compounds (e.g., cellulose, minerals, starch, proteins, organic acids, lipids, and soluble sugars). Taking into account the composition characteristics and circular economy of VFBW, many new emerging conversion technologies for the treatment of VFBW (such as hydrothermal gasification, ultrasound-assisted extraction, and synthesis of bioplastics) have been developed. This review summarizes the current literature discussing the technical parameters, process, mechanism, and characteristics of various emerging conversion methods, as well as analyzing the application, environmental impact, and bio-economy of by-products from the conversion process, to facilitate solutions to the key problems of engineering cases using these methods. The shortcomings of the current study and the direction of future research are also highlighted in the review.

Green Solvents: Emerging Alternatives for Carotenoid Extraction from Fruit and Vegetable By-Products

Carotenoids have important implications for human health and the food industry due to their antioxidant and functional properties. Their extraction is a crucial step for being able to concentrate them and potentially include them in food products. Traditionally, the extraction of carotenoids is performed using organic solvents that have toxicological effects. Developing greener solvents and techniques for extracting high-value compounds is one of the principles of green chemistry and a challenge for the food industry. This review will analyze the use of green solvents, namely, vegetable oils, supercritical fluids, deep eutectic solvents, ionic liquids, and limonene, combined with nonconventional techniques (ultrasound-assisted extraction and microwave), for carotenoid extraction from fruit and vegetable by-products as upcoming alternatives to organic solvents. Recent developments in the isolation of carotenoids from green solvents and their inclusion in food products will also be discussed. The use of green solvents offers significant advantages in extracting carotenoids, both by decreasing the downstream process of solvent elimination, and the fact that the carotenoids can be included directly in food products without posing a risk to human health.

Bioactive Natural Pigments' Extraction, Isolation, and Stability in Food Applications

Color in food has multiple effects on consumers, since this parameter is related to the quality of a product, its freshness, and even its nutrient content. Each food has a characteristic color; however, this can be affected by the technological treatments that are applied during its manufacturing process, as well as its storage. Therefore, the development of new food products should take into account consumer preferences, the physical properties of a product, food safety standards, the economy, and applications of technology. With all of this, the use of food additives, such as dyes, is increasingly important due to the interest in the natural coloring of foods, strict regulatory pressure, problems with the toxicity of synthetic food colors, and the need for globally approved colors, in addition to current food market trends that focus on the consumption of healthy, organic, and natural products. It is for this reason that there is a growing demand for natural pigments that drives the food industry to seek or improve extraction techniques, as well as to study different stability processes, considering their interactions with the food matrix, in order to meet the needs and expectations of consumers.

Current Challenges in the Sustainable Valorisation of Agri-Food Wastes: A Review

In the upcoming years, the world will face societal challenges arising, in particular, from the impact of climate change and the inefficient use of natural resources, in addition to an exponential growth of the world population, which according to the United Nations (UN) estimations will be 9.8 billion in 2050. This increasing trend requires optimized management of natural resources with the use of value-added waste and a significant reduction in food loss and food waste. Moreover, the recent pandemic situation, COVID-19, has contributed indisputably. Along with the agri-food supply chain, several amounts of waste or by-products are generated. In most cases, these biomass wastes cause serious environmental concerns and high costs to enterprises. The valorisation of the agri-food loss and food industry wastes emerged as a useful strategy to produce certain value-added compounds with several potential applications, namely in the food, health, pharmaceutical, cosmetic, and environmental fields. Therefore, in this review, some of the crucial sustainable challenges with impacts on the valorisation of agri-food loss/wastes and by-products are discussed and identified, in addition to several opportunities, trends and innovations. Potential applications and usages of the most important compounds found in food loss/waste will be highlighted, with a focus on the food industry, pharmaceutical industry, and the environment.

TPP-chitosomes as potential encapsulation system to protect carotenoid-rich extract obtained from carrot by-product: A comparison with liposomes and chitosomes

The objectives of this study were to extract bioactive compounds from carrot by-products and evaluate their chemical stability after encapsulation in liposomes (L) coated either with chitosan (Ch) or using sodium tripolyphosphate for chitosan complexation (TPP-Ch). The main compounds quantified in this study were carotenoids and total phenolic compounds, which reached encapsulation efficiencies higher than 75%. The TPP-Ch charged with carrot extract showed greater particle size (90.5 nm) and zeta potential (+22 mV) than vesicles without coating (68.0 nm and -2 mV, respectively), indicating that liposomes were successfully coated with chitosan. Regarding results of the carotenoid's encapsulated stability, TPP-Ch particles were more efficient preventing their degradation in all the experimental conditions studied (40 and 70 °C). It is significant that loaded TPP-Ch particles demonstrated similar results for the stability of carotenoid-rich extracts in ethanol, which would therefore be suitable for application in food industry or any aqueous matrices.

Sustainable Food Systems: The Case of Functional Compounds towards the Development of Clean Label Food Products

The addition of natural components with functional properties in novel food formulations confers one of the main challenges that the modern food industry is called to face. New EU directives and the global turn to circular economy models are also pressing the agro-industrial sector to adopt cradle-to-cradle approaches for their by-products and waste streams. This review aims to present the concept of “sustainable functional compounds”, emphasizing on some main bioactive compounds that could be recovered or biotechnologically produced from renewable resources. Herein, and in view of their efficient and “greener” production and extraction, emerging technologies, together with their possible advantages or drawbacks, are presented and discussed. Μodern examples of novel, clean label food products that are composed of sustainable functional compounds are summarized. Finally, some action plans towards the establishment of sustainable food systems are suggested.

Advances in the synthesis of three typical tetraterpenoids including β-carotene, lycopene and astaxanthin

Carotenoids are natural pigments that widely exist in nature. Due to their excellent antioxidant, anticancer and anti-inflammatory properties, carotenoids are commonly used in food, medicine, cosmetic and other fields. At present, natural carotenoids are mainly extracted from plants, algae and microorganisms. With the rapid development of metabolic engineering and molecular biology as well as the continuous in-depth study of carotenoids synthesis pathways, industrial microorganisms have showed promising applications in the synthesis of carotenoids. In this review, we introduced the properties of several carotenoids and their biosynthetic metabolism process. Then, the microorganisms synthesizing carotenoids through the natural and non-natural pathways and the extraction methods of carotenoids were summarized and compared. Meanwhile, the influence of substrates on the carotenoids production was also listed. The methods and strategies for achieving high carotenoid production are categorized to help with future research.

Insight into the Progress on Natural Dyes: Sources, Structural Features, Health Effects, Challenges, and Potential

(1) Background: Dyes play an important role in food, medicine, textile, and other industries, which make human life more colorful. With the increasing demand for food safety, the development of natural dyes becomes more and more attractive. (2) Methods: The literature was searched using the electronic databases PubMed, Web of Science, and SciFinder and this scoping review was carried out following Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). (3) Results: 248 articles were included in this review. This review summarizes the research progress on natural dyes in the last ten years. According to structural features, natural dyes mainly include carotenoids, polyphenols, porphyrins, and alkaloids, and some of the newest dyes are summarized. Some pharmacological activities of carotenoids, anthocyanin, curcumin, and betalains in the last 10 years are summarized, and the biological effects of dyes regarding illumination conditions. The disadvantages of natural dyes, including sources, cost, stability, and poor bioavailability, limit their application. Here, some feasible strategies (potential resources, biotechnology, new extraction and separation strategies, strategies for improving stability) are described, which will contribute to the development and utilization of natural dyes. (4) Conclusion: Natural dyes show health benefits and potential in food additives. However, it is necessary for natural dyes to pass toxicity tests and quality tests and receive many regulatory approvals before their final entry into the market as food colorants or as drugs.

Challenges and solutions of extracting value-added ingredients from fruit and vegetable by-products: a review

Every year, huge amounts of fruit and vegetable by-products in the food processing factories are produced. These by-products have great potential to be used for different targets especially the extraction of value-added ingredients. The target of this study is to review the challenges of extraction of value-added ingredients from fruit and vegetable by-products on the industrial scale and to describe current trends in solving these problems. In addition, some strategies such as multi-component extraction as well as application of fermentation before or after the extraction process, and production of biofuel, organic fertilizers, animal feeds, etc. on final residues after extraction of value-added ingredients are discussed in this review paper. In fact, simultaneous extraction of different value-added ingredients from fruit and vegetable by-products can increase the extraction efficiency and reduce the cost of value-added ingredients as well as the final volume of these by-products. After extraction of value-added ingredients, the residues can be used to produce biofuels, or they can be used to produce organic fertilizers, animal feeds, etc. Therefore, the application of several appropriate strategies to treat the fruit and vegetable by-products can increase their application, protect the environment, and improve the food economy.

Kinetic Study of Encapsulated β-Carotene Degradation in Dried Systems: A Review

β-Carotene serves as a precursor of vitamin A and provides relevant health benefits. To overcome the low bioavailability of β-carotene from natural sources, technologies have been designed for its encapsulation in micro- and nano-structures followed by freeze-drying, spray-drying, supercritical fluid-enhanced dispersion and electrospraying. A technological challenge is also to increase β-carotene stability, since due to its multiple conjugated double bonds, it is particularly prone to oxidation. This review analyzes the stability of β-carotene encapsulated in different dried micro- and nano-structures by comparing rate constants and activation energies of degradation. The complex effect of water activity and glass transition temperature on degradation kinetics is also addressed, since the oxidation process is remarkably dependent on the glassy or collapsed state of the matrix. The approaches to improve β-carotene stability, such as the development of inclusion complexes, the improvement of the performance of the interface between air and oil phase in which β-carotene was dissolved by application of biopolymer combinations or functionalization of natural biopolymers, the addition of hydrophilic small molecular weight molecules that reduce air entrapped in the powder and the co-encapsulation of antioxidants of various polarities are discussed and compared, in order to provide a rational basis for further development of the encapsulation technologies.

Kinetic Study of Encapsulated β-Carotene Degradation in Aqueous Environments: A Review

The provitamin A activity of β-carotene is of primary interest to address one of the world’s major malnutrition concerns. β carotene is a fat-soluble compound and its bioavailability from natural sources is very poor. Hence, studies have been focused on the development of specific core/shell micro- or nano-structures that encapsulate β-carotene in order to allow its dispersion in liquid systems and improve its bioavailability. One key objective when developing these structures is also to accomplish β-carotene stability. The aim of this review is to collect kinetic data (rate constants, activation energy) on the degradation of encapsulated β-carotene in order to derive knowledge on the possibility for these systems to be scaled-up to the industrial production of functional foods. Results showed that most of the nano- and micro-structures designed for β-carotene encapsulation and dispersion in the water phase provide better protection with respect to a natural matrix, such as carrot juice, increasing the β-carotene half-life from about 30 d to more than 100 d at room temperature. One promising approach to increase β-carotene stability was found to be the use of wall material, surfactants, or co-encapsulated compounds with antioxidant activity. Moreover, a successful approach was the design of structures, where the core is partially or fully solidified; alternatively, either the core or the interface or the outer phase are gelled. The data collected could serve as a basis for the rational design of structures for β-carotene encapsulation, where new ingredients, especially the extraordinary natural array of hydrocolloids, are applied.

Green Extraction of Carotenoids from Fruit and Vegetable Byproducts: A Review

Carotenoids are characterized by a wide range of health-promoting properties. For example, they support the immune system and wound healing process and protect against UV radiation’s harmful effects. Therefore, they are used in the food industry and cosmetics, animal feed, and pharmaceuticals. The main sources of carotenoids are the edible and non-edible parts of fruit and vegetables. Therefore, the extraction of bioactive substances from the by-products of vegetable and fruit processing can greatly reduce food waste. This article describes the latest methods for the extraction of carotenoids from fruit and vegetable byproducts, such as solvent-free extraction—which avoids the costs and risks associated with the use of petrochemical solvents, reduces the impact on the external environment, and additionally increases the purity of the extract—or green extraction using ultrasound and microwaves, which enables a significant improvement in process efficiency and reduction in extraction time. Another method is supercritical extraction with CO₂, an ideal supercritical fluid that is non-toxic, inexpensive, readily available, and easily removable from the product, with a high penetration capacity.

Ultrasound-Assisted Extraction of Carotenoids from Carrot Pomace and Their Optimization through Response Surface Methodology

Ultrasound-assisted extraction (UAE) was used to extract carotenoids from the carrot pomace. To investigate the effect of independent variables on the UAE, the response surface methodology (RSM) with central-composite design (CCD) was employed. The study was conducted with three independent variables including extraction time (min), temperature (°C), and ethanol concentration (%). The results showed that the optimal conditions for UAE were achieved with an extraction time of 17 min, temperature of 32 °C, and ethanol concentration of 51% of total carotenoids (31.82 ± 0.55); extraction time of 16 min, temperature of 29 °C, and ethanol concentration of 59% for a combination of β-carotene (14.89 ± 0.40), lutein (5.77 ± 0.19), and lycopene (2.65 ± 0.12). The non-significant (p > 0.05) correlation under optimal extraction conditions between predicted and experimental values suggested that UAE is the more productive process than conventional techniques for the extraction of carotenoids from the carrot pomace.

Optimization of the Extraction Technology and Assessment of Antioxidant Activity of Chlorogenic Acid-Rich Extracts From Eucommia ulmoides Leaves

Chlorogenic acid has been proved to have cardiovascular protection, antibacterial, antiviral, hemostatic, and hypolipidemia effects. Modern scientific research on the bioactivity of chlorogenic acid has been extended to the fields of food, medicine, health care and daily-use chemical industry. The aim of this research was to optimize the extraction conditions for chlorogenic acid from Eucommia ulmoides (Eucommiaceae) leaves. The significant variables were screened and optimized by a combination of Plackett-Burman test and Box-Behnken design. Optimum extraction parameters with ethanol concentration of 50%, solvent pH value of 3, and particle size of 60 mesh were determined according to variance analysis and contour plots. Under these conditions, the yield of chlorogenic acid was up to 4.36 mg/g, which was basically consistent with the theoretical prediction value of 4.50 mg/g. This study also proved the potential antioxidant activity of E. ulmoides leaves. The optimal extract of E. ulmoides leaves rich in chlorogenic acid showed the highest antioxidant activity in the FRAP method, which was 219.8 μM Trolox equivalents (TE) per g extract weight (EW) (μM TE/g EW). The DPPH method gave a similar value (168 μM TE/g EW) to the ABTS method (152 μM TE/g EW). The established extraction process was efficient in the recovery of chlorogenic acid from E. ulmoides leaves, encouraging its valorization as a cheap and sustainable alternative for the isolation of chlorogenic acid.

Discoloration investigations of freeze-dried carrot cylinders from physical structure and color-related chemical compositions

BACKGROUND

High carotenoid content always lead to a yellower/redder color in carrots, while a puzzling phenomenon still exists that freeze-dried carrots (FDC) have a higher carotenoid content but a lighter color compared with thermal-dried carrots. It seems that carotenoid is not the only main factor affecting sample color. Hence the discoloration characteristics of freeze-dried carrots were comprehensively analyzed from physical structure and color-related chemical composition profile.

RESULTS

Outcomes of low-field nuclear magnetic resonance and scanning electron microscopy showed that sublimation of immobilized water preserved the intact porous structure of FDC, which kept the volume shrinkage below 30% and led to less accumulations of color-related compositions. Besides, results of correlation and principal component analysis-X model proved that lutein and caffeic acid mainly affected a* value (r = 0.917) and b* value (r = 0.836) of FDC, respectively. Moreover, lipoxygenase indirectly affected sample color by degrading carotenoids, and the lutein content loss for fresh and blanching FDC was 41.56% and 47.14%, respectively.

CONCLUSIONS

The discoloration of FDC was significantly affected by both physical structure and color-related chemical compositions. © 2021 Society of Chemical Industry.

Microencapsulation of carotenoid-rich materials: A review

Carotenoids are natural pigments that present several bioactive properties, including antioxidant, anticarcinogenic and provitamin A activities. However, these compounds are susceptible to degradation when exposed to a number of conditions (e.g. light, heat, oxygen), leading to loss of benefits and hampering their application in food products. Their hydrophobicity also makes incorporation into water-based foods more difficult. Microencapsulation techniques have been applied for decades to provide stability to carotenoid-rich extracts under typical conditions of processing and storage of foods, besides offering several other advantages to the use and application of these materials. This work reviews the recent advances in the microencapsulation of carotenoid-rich extracts, oils and oleoresins from varying sources, evidencing the technologies applied to encapsulate these materials, the effects of encapsulation on the obtained particles, and the impact of such processes on the bioaccessibility and release profile of carotenoids from microparticles. Moreover, recent applications of carotenoid-rich microparticles in food products are discussed. Most of the applied processes were effective in improving different aspects of the encapsulated materials, especially the stability of carotenoids during storage, resulting in microparticles with promising properties for future applications in food products. However, the lack of information about the effects of microencapsulation on carotenoids during processing of model foods, the sensory acceptance of enriched food products and the bioaccessibility and bioavailability of microencapsulated carotenoids reveals gaps that should be explored in the future.

The effects of pectin and wax on the characteristics of oil-in-water (O/W) emulsions

The study was aimed to investigate characteristics of emulsion containing pectin, wax, maltodextrin, and carotenoid enriched flaxseed oil by means of stability, rheology, particle size, and low-resolution of time domain nuclear magnetic resonance (NMR) relaxometry measurements. Emulsions were prepared with different carotenoid enriched-flaxseed oil concentrations (6%, 9%, 12%, and 15% w/w) and ratios of maltodextrin/(pectin+wax) (3:1, 6:1, 9:1, and 12:1 g/g). Percentage separation of 12% oil 12:1 ratio of maltodextrin/(pectin+wax) (g/g), 15% oil 9:1, and 12:1 ratios of maltodextrin/(pectin+wax) (g/g) of emulsions was determined as 2.0 ± 0.5%, 4.0 ± 0.5%, and 8.0 ± 0.5%, respectively. No separation was observed in other emulsions. The rheological behavior of emulsions was best described by the power law model. When the concentration of pectin+wax in the emulsion decreased, the n values of the emulsions were close to 1, indicating that the fluid behavior approaches Newtonian behavior. Moreover, the emulsion viscosity was observed to increase when pectin and wax concentrations in the emulsion increased. The increase in pectin and wax concentration in emulsions with oil contents of 6% and 9% resulted in a reduction in the average particle size. However, if the oil concentration in the emulsions was 12% or more, the increase in the ratio of maltodextrin/(pectin+wax) (g/g) led to a decrease in the average particle size. NMR transverse relaxation times (T₂ ) of emulsions were measured and results showed that T₂ values for almost all formulations decreased when the ratio of maltodextrin/(pectin+wax) reduced. PRACTICAL APPLICATION: Study results demonstrated that the combination of pectin and wax together with maltodextrin as a filling material could be an alternative way to improve emulsion stability. Findings of this study provided useful guidance for the future studies about the potential use of pectin, wax, and maltodextrin as wall material in encapsulation of oils or in producing edible films.

Techniques and modeling of polyphenol extraction from food: a review

There is a growing demand for vegetal food having health benefits such as improving the immune system. This is due in particular to the presence of polyphenols present in small amounts in many fruits, vegetables and functional foods. Extracting polyphenols is challenging because extraction techniques should not alter food quality. Here, we review technologies for extracting polyphenolic compounds from foods. Conventional techniques include percolation, decoction, heat reflux extraction, Soxhlet extraction and maceration, whereas advanced techniques are ultrasound-assisted extraction, microwave-assisted extraction, supercritical fluid extraction, high-voltage electric discharge, pulse electric field extraction and enzyme-assisted extraction. Advanced techniques are 32-36% more efficient with approximately 15 times less energy consumption and producing higher-quality extracts. Membrane separation and encapsulation appear promising to improve the sustainability of separating polyphenolic compounds. We present kinetic models and their influence on process parameters such as solvent type, solid and solvent ratio, temperature and particle size.

A comprehensive review on carotenoids in foods and feeds: status quo, applications, patents, and research needs

Carotenoids are isoprenoids widely distributed in foods that have been always part of the diet of humans. Unlike the other so-called food bioactives, some carotenoids can be converted into retinoids exhibiting vitamin A activity, which is essential for humans. Furthermore, they are much more versatile as they are relevant in foods not only as sources of vitamin A, but also as natural pigments, antioxidants, and health-promoting compounds. Lately, they are also attracting interest in the context of nutricosmetics, as they have been shown to provide cosmetic benefits when ingested in appropriate amounts. In this work, resulting from the collaborative work of participants of the COST Action European network to advance carotenoid research and applications in agro-food and health (EUROCAROTEN, www.eurocaroten.eu, https://www.cost.eu/actions/CA15136/#tabs|Name:overview) research on carotenoids in foods and feeds is thoroughly reviewed covering aspects such as analysis, carotenoid food sources, carotenoid databases, effect of processing and storage conditions, new trends in carotenoid extraction, daily intakes, use as human, and feed additives are addressed. Furthermore, classical and recent patents regarding the obtaining and formulation of carotenoids for several purposes are pinpointed and briefly discussed. Lastly, emerging research lines as well as research needs are highlighted.