Effects of pretreatments on physicochemical and structural properties of proteins isolated from canola seeds after oil extraction by supercritical-CO2 process

Supercritical carbon dioxide treatment improves the functional properties of pea protein: Application in eggless cakes

The use of plant proteins in food matrices is often limited due to inferior functional properties. Modification of proteins by supercritical carbon dioxide (scCO2) has gained attention in this regard as a safe, chemical-free, and sustainable technique. The present work explores the impact of process parameters of scCO2 modification of pea proteins on its structural and functional properties. This treatment induced the unfolding of protein structure as seen from an increase in intrinsic fluorescence and surface hydrophobicity, altered the secondary structure, and increased the free sulfhydryl groups. The scCO2 treatment positively affected the water and oil absorption capacities and enhanced the emulsifying and foaming capacity and stability. However, the rheological and film-forming properties of scCO2-modified protein were detrimentally affected at 350 bar. scCO2 modified pea proteins (250 bar/45 °C/60 min) revealed a uniform pore size distribution throughout the eggless cake matrix with sensory scores (7.34) comparable to that containing egg (7.59).

Impact of Supercritical CO2 Treatment on Lupin Flour and Lupin Protein Isolates

Global population growth is putting pressure on the food supply, necessitating the exploration of new, alternative, and sustainable protein sources. Lupin, an underutilized legume in human nutrition, has the potential to play a significant role in addressing this challenge. However, its incorporation into the human diet requires thorough investigation, including exploring and optimizing functionalization processes to maximize its potential. This study aimed to optimize the parameters (pressure, time, and CO2 flow) for extracting anti-technological factors (ATFs) from lupin using supercritical CO2 (SC-CO2) and to evaluate the effects of this extraction on both the flour and the protein isolate derived from it. Optimization revealed that the optimal SC-CO2 conditions were a CO2 flow rate of 4 kg/h at 400 bar for 93 min. Under these conditions, significant changes were observed in the flour composition, including a reduction in oil, polyphenols, and moisture content, along with an increase in ash content. Improved color parameters were also noted. These variations were attributed to the removal of oil and phenolic compounds during processing. Furthermore, this research demonstrated that SC-CO2 treatment improved lupin protein isolate (LPI) purity (93.81 ± 0.31% vs. 87.42 ± 0.48%), significantly reduced oil content (8.31 ± 0.09% vs. 14.31 ± 0.32%), and enhanced color parameters. The SC-CO2 procedure also resulted in a higher protein extraction yield (56.95 ± 0.45% vs. 53.29 ± 2.37%). However, the total extraction yield (g LPI/100 g of flour) was not affected by SC-CO2 treatment, remaining at 24.30 ± 0.97% for the control sample and 24.21 ± 0.26% for the treated sample. The extracted oil (2.71 ± 0.11 g/100 g of flour), a co-product of the SC-CO2 step, exhibited a fatty acid profile characterized by high levels of unsaturated fatty acids (62.8 ± 0.74 g/100 g oil), oleic acid (27.76 ± 0.77 g/100 g oil), linoleic acid (25.98 ± 0.73 g/100 g oil), and α-linolenic acid (5.32 ± 0.16 g/100 g oil), as well as a balanced ratio of essential fatty acids (n-6/n-3 = 4.89). The treatment had minimal to no effect on amino acid content or chemical score, and the protein was characterized by high amounts of essential amino acids (334 ± 3.12 and 328 ± 1.05 mg/g protein in LPI-control and LPI-SF, respectively). These findings demonstrate that both the LPI and the oil extracted using SC-CO2 possess high nutritional quality and are suitable for human food applications.

Ultrasonication modifies the structural, thermal and functional properties of pumpkin seed protein isolate (PSPI)

Protein isolates from pumpkin seeds were prepared and then treated with high-intensity ultrasound (HIUS) using a probe-based method. The impact of ultrasonication on the physicochemical, molecular, and thermal properties of these isolates were analyzed and compared to untreated controls. Results showed significant improvements (p ≤ 0.05) in color (L*, a*, b* values), solubility, emulsification capacity, and stability, as well as a reduction in molecular weight, indicating enhanced functionality of the pumpkin seed protein isolates (PSPIs) after HIUS treatment. However, HIUS treatment decreased the denaturation temperature (Td), denaturation enthalpy (ΔH), thermal stability, and particle size of the isolates. With treatment durations ranging from 5 to 20 min, Td dropped from 67.31 °C to 56.38 °C, and ΔH declined from 45.78 to 35.43 J/g, likely due to structural and conformational modifications from ultrasonic-induced molecular bond disruptions. The greatest reduction in particle size, from 117.46 μm to 85.26 μm, was observed after 20 min of ultrasonication. X-ray diffraction (XRD) analysis showed two distinct diffraction peaks at 2θ = 10° and 2θ = 20°, indicating altered crystallite sizes post-ultrasound treatment. Ultrasonication induced structural and conformational changes in the pumpkin seed protein isolates, as confirmed by SDS-PAGE and weight loss analyses. Alterations in the SDS-PAGE profile and reduced weight loss were associated with improved solubility and enhanced thermal and functional properties in the treated pumpkin seed protein isolates. This emphasizes the potential of PSPI to increase their value-added potential through ultrasonication.

Use of supercritical CO2 to improve the quality of lupin protein isolate

Lupins are an excellent source of protein which can be used to obtain protein isolates with potential use in the food industry. Some studies use supercritical CO2 (SC-CO2) to defat legume flours, but no study analyzes the effect of applying this technology directly to the protein isolate. This article has proposed the use of SC-CO2 to improve lupin protein isolate (LPI) quality. SC-CO2 increased the LPI purity while reducing oil and other antitechnological factors (saponins and polyphenols). The treatment significantly improved the LPI color due to the elimination of the lipid fraction and lipophilic pigments (carotenoids). No changes in amino acid contents or chemical score were observed due to the SC-CO2. Finally, the treatment improved or did not affect the main LPI technofunctional properties. Therefore, SC-CO2 is a promising technique to enhance the quality of protein isolates, without affecting or improving their functional properties.

Impact of green techniques on intricate cell wall structure of bee pollen to enhance functional characteristics and improve its in vitro digestibility

Bee pollen is a nutrient-rich super food, but its rigid dual-layered structure limits nutrient release and absorption. The outer exine, composed of stress-resistant sporopollenin, and the inner intine, consisting of cellulose and pectin, form a barrier to digestive breakdown. This study investigates the potential of green techniques, specifically supercritical fluid extraction and ultrasonication, to disaggregate pollen cell walls, enhancing its bioavailability and maximizing nutrient utilization. Ultrasonication treated pollen (USTP) and supercritical fluid extraction-treated pollen (STP) demonstrated disruption, as evidenced by scanning electron microscopy imaging. In relation to scanning electron microscopy, techno-functional, antioxidant, and compositional analysis displayed a positive outcome, with crude lipid, protein, antioxidant activity (2,2-diphenyl-1-picrylhydrazyl activity and 2,2'-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid assay) and total phenolic content increased by 34.80%, 32.58%, 10.80%, 11.37%, and 83.94%, respectively. Based on the above properties, USTP for 4 h and STP at 400 bar for 40 min were identified as the optimal conditions for disintegration. Furthermore, optimized samples analyzed for amino acid and mineral release revealed a notable increase in composition of essential amino acid and minerals (Ca, Cu, Fe, etc.) by ∼1.5 and 1.2 times, respectively. Along with significant changes in composition, fractured pollen exhibited 1.4 folds increase in protein digestibility with minor differences in thermal stability, and crystallinity as established by differential scanning calorimetry, and X-ray diffraction analysis. The study confirms that nutrient release and absorption remain restricted without pre-treatment, highlighting the necessity of specific treatment to disintegrate bee pollen before its use as a functional food ingredient. PRACTICAL APPLICATION: Bee pollen is a rich source of all the essential nutrients required by the humans and recognised as a complete food. However, its tough cellular structure restricts its utilisation in numerous food applications. Therefore, to disintegrate bee pollen and release its nutrients, ultrasonication and super critical fluid extraction processes were employed to improve its utilization for human purposes. Both the treatment techniques, enhanced bee pollen's bioavailability and functional properties, making it more suitable for use in nutraceuticals and functional foods.These treatments proved to increase the antioxidant capacity, digestibility, and create high-value ingredient for supplements, beverages, and fortified foods.

Inactivation effect and kinetics of cathepsin L from white shrimp (Litopenaeus vannamei) by dense phase carbon dioxide

The effects of dense phase carbon dioxide (DPCD) pressure and temperature on the activity of cathepsin L in white shrimp (Litopenaeus vannamei) were studied. Meanwhile the effects of DPCD and heat treatment on the activity of cathepsin L were compared. The results of inactivation kinetics showed that under the same treatment temperature, the inactivation effect of DPCD on cathepsin L increased gradually with the increase of pressure and time. The effect of DPCD pressure on the activity of cathepsin L accorded with the first-order kinetic model. Under the same treatment pressure, with the increase of temperature, the inactivation effect of cathepsin L was significant at the initial stage of DPCD treatment (rapid inactivation period), and decreased with the extension of time (stable inactivation period). The effect of DPCD treatment temperature on cathepsin L activity accorded with the first-order kinetic model at 35 °C, and two-stage kinetic model at 40-60 °C. The difference of relative enzyme activity between the two treatments showed that the dependence of DPCD on temperature was greater than that of heat. E a, F and E a, S of DPCD were higher than that of heat, which indicated that cathepsin L was more easily inactivated under DPCD treatment.

Reduction in the antigenicity of beta-lactoglobulin in whole milk powder via supercritical CO2 treatment

Cow milk allergy is a common phenomenon experienced in early childhood (<5 yr of age) with an average occurrence rate of roughly 2.5%. The most prevalent allergen in cow milk is believed to be β-LG. The objective of this study was to evaluate the use of hydrophobic supercritical CO2 (ScCO2) to modify the chemical structure β-LG, thus impairing its recognition by antibodies. Whole milk powder (WMP) was selected because of its closest compositional resemblance to bovine fluid milk and its applications in reconstitution and in the beverage (infant, toddler, and adult), confectionary, bakery, and meat industries. For this study, WMP was treated with food-grade CO2 at temperatures of 50, 63, and 75°C under operating pressures of 100, 150, 200, 250, and 300 bar. Proteins in WMP were examined using SDS-PAGE, western blot, and ELISA. Orbitrap Fusion liquid chromatography-tandem MS (LC-MS/MS) and periodic staining was performed to confirm post-translational modifications in β-LG. Functional properties of WMP before and after treatment were assessed by its solubility index, oil holding capacity, emulsion capacity and stability, zeta potential, particle size, and color analysis. SDS-PAGE of treated samples yielded fuzzy bands (variable mobility of molecules due to different molecular weights results in ill-defined bands) indicative of an increase in molecular weight, presumably due to chemical change in the protein, and demonstrated a maximum of 71.13 ± 0.29% decrease in the band intensity of β-LG under treatment conditions of 75°C/300 bar for 30 min. These changes were small with samples treated with heat only. Lighter, diffused bands were observed using western blot analysis. The ELISA tests proved that ScCO2 treatment specifically and significantly affected the antigenicity of β-LG with a reduction of 42.9 ± 2.83% and 54.75 ± 2.43% at 63°C/200 bar and 75°C/300 bar, respectively. Orbitrap fusion detected the presence of fatty acids and sugar moieties bound to β-LG and the latter was confirmed by periodic staining. Functional properties of ScCO2-treated milk powder yielded a decrease in solubility index and an increase in emulsion capacity of WMP was observed under ScCO2 treatment at 75°C/300 bar, with small and insignificant changes at other treatments producing a decrease in antigenicity. Color changes were small for most samples, except at 63°C/200 bar, where a significant increase in yellowness was observed. Zeta potential and particle size measurements indicated that most changes were temperature driven. This study demonstrates 2 approaches to mitigate β-LG antigenicity via fatty acid binding and lactosylation using hydrophobic ScCO2.

Sustainable strategies for using natural extracts in smart food packaging

The growing demand for sustainable and eco-friendly food packaging has prompted research on innovative solutions to environmental and consumer health issues. To enhance the properties of smart packaging, the incorporation of bioactive compounds derived from various natural sources has attracted considerable interest because of their functional properties, including antioxidant and antimicrobial effects. However, extracting these compounds from natural sources poses challenges because of their complex chemical structures and low concentrations. Traditional extraction methods are often environmentally harmful, expensive and time-consuming. Thus, green extraction techniques have emerged as promising alternatives, offering sustainable and eco-friendly approaches that minimise the use of hazardous solvents and reduce environmental impact. This review explores cutting-edge research on the green extraction of bioactive compounds and their incorporation into smart packaging systems in the last 10 years. Then, an overview of bioactive compounds, green extraction techniques, integrated techniques, green extraction solvents and their application in smart packaging was provided, and the impact of bioactive compounds incorporated in smart packaging on the shelf lives of food products was explored. Furthermore, it highlights the challenges and opportunities within this field and presents recommendations for future research, aiming to contribute to the advancement of sustainable and efficient smart packaging solutions.

Canola Seed Protein: Pretreatment, Extraction, Structure, Physicochemical and Functional Characteristics

The rapid growth of the global population has led to an unprecedented demand for dietary protein. Canola seeds, being a widely utilized oil resource, generate substantial meal by-products following oil extraction. Fortunately, canola meals are rich in protein. In this present review, foremost attention is directed towards summarizing the characteristics of canola seed and canola seed protein. Afterwards, points of discussion related to pretreatment include an introduction to pulsed electric field treatment (PEF), microwave treatment (MC), and ultrasound treatment (UL). Then, the extraction method is illustrated, including alkaline extraction, isoelectric precipitation, acid precipitation, micellization (salt extraction), and dry fractionation and tribo-electrostatic separation. Finally, the structural complexity, physicochemical properties, and functional capabilities of rapeseed seeds, as well as the profound impact of various applications of rapeseed proteins, are elaborated. Through a narrative review of recent research findings, this paper aims to enhance a comprehensive understanding of the potential of canola seed protein as a valuable nutritional supplement, highlighting the pivotal role played by various extraction methods. Additionally, it sheds light on the broad spectrum of applications where canola protein demonstrates its versatility and indispensability as a resource.

Drying Technique Providing Maximum Benefits on Hydrogelling Ability of Avocado Seed Protein: Spray Drying

The current study focused on creating natural hydrogels consisting of mixtures of avocado seed proteins dried with different techniques and locust bean gum. Proteins were extracted from avocado seed by alkali and isoelectric precipitation methods. Avocado seed proteins were dried by five different drying methods, namely ambient drying, oven drying, vacuum drying, freeze drying, and spray drying. FT-IR spectra were used to analyze the chemical structure of proteins dried using various techniques. Additionally, hydrogel models were constructed in the presence of avocado seed proteins and locust bean gum to clarify the effect of drying techniques on their hydrogelling ability. The impact of drying techniques on the functional behavior of hydrogels was notable. The maximum water holding capacity values were detected in the hydrogel system containing spray-dried proteins (93.79%), followed by freeze-dried (86.83%), vacuum-dried (76.17%), oven-dried (72.29%), and ambient-dried (64.8%) counterparts. The swelling ratio was 34.10, 33.51, 23.05, 18.93, and 14.39% for gels in the presence of freeze-dried, spray-dried, vacuum-dried, oven-dried, and ambient-dried proteins, respectively. Additionally, the desirable values for the amount of protein leaking from the systems prepared using spray-dried (7.99%) and freeze-dried (12.14%) proteins were obtained compared to others (ambient-dried: 24.03%; oven-dried: 17.69%; vacuum-dried: 19.10%). Superior results in terms of textural properties were achieved in hydrogel models containing spray-dried and freeze-dried proteins. In general, hydrogel models exhibited elastic behavior rather than viscous properties; however, the magnitudes of elasticity varied. Furthermore, the success of gels containing hydrogel models containing spray-dried protein and locust bean gum in the bioactive compound delivery system was obvious compared with protein ones alone.

Partial characterization of canola (Brassica napus L.) protein isolates as affected by extraction and purification methods

Canola (Brassica napus L.) meal represents a prominent alternative plant-based source for protein isolation. This work aimed to investigate the combined effect of extraction and purification methods for the production of canola protein isolates (CPIs). CPIs were characterized in terms of process yield, protein recovery, basic composition, amino acid profile, in vitro protein digestibility, techno-functional properties, structural properties, and molecular features. The results showed that the Alk-Uf method enhanced yield (16.23 %) and protein recovery (34.88 %). Meanwhile, the Et-Alk-Uf method exhibited the highest crude protein (89.71 %) and free amino nitrogen (4.34 mg g protein-1) contents. Furthermore, protein digestibility (95.5 %) and protein digestibility corrected amino acid score (1.0) were improved using the Et-Alk-Ac method. Conversely, the amino acid composition, secondary structure, and electrophoretic profiles were generally similar for all CPIs. The Alk-Uf and Et-Alk-Uf methods produced isolates with the highest water solubility (∼39.18 %), water absorption capacity (∼3.86 g water g protein-1), oil absorption capacity (∼2.77 g oil g protein-1), and foaming capacity (∼505.26 %). Finally, the foaming stability (93.75 %) and foaming density (34.38 %) were increased when employing the Alk-Ac method. These findings suggest that, in general, the Alk-Uf and Et-Alk-Uf methods can be used to obtain CPIs with high added value for use in food formulations.

Techno-Functional and Sensory Characterization of Commercial Plant Protein Powders

Many new plant proteins are appearing on the market, but their properties are insufficiently characterized. Hence, we collected 24 commercial proteins from pea, oat, fava bean, chickpea, mung bean, potato, canola, soy, and wheat, including different batches, and assessed their techno-functional and sensory properties. Many powders had yellow, red, and brown color tones, but that of fava bean was the lightest. The native pH ranged from 6.0 to 7.7. The water solubility index was 28% on average, but after heat treatment the solubility typically increased. Soy isolate had by far the best water-holding capacity of 6.3 g (H₂O) g^-1, and canola had the highest oil-holding capacity of 2.8 g (oil) g^-1. The foaming capacity and stability results were highly varied but typical to the raw material. The emulsification properties of all powders were similar. Upon heating, the highest viscosity and storage modulus were found in potato, canola, and mung bean. All powders had raw material flavor, were bitter and astringent, and undissolved particles were perceived in the mouth. Large differences in functionality were found between the batches of one pea powder. In conclusion, we emphasize the need for methodological standardization, but while respecting the conditions found in end applications like meat and dairy analogs.

Factors Affecting the Quality of Canola Grains and Their Implications for Grain-Based Foods

Canola, Brassica napus L., is a major oilseed crop that has various uses in the food, feed, and industrial sectors. It is one of the most widely produced and consumed oilseeds in the world because of its high oil content and favorable fatty acid composition. Canola grains and their derived products, such as canola oil, meal, flour, and bakery products, have a high potential for food applications as they offer various nutritional and functional benefits. However, they are affected by various factors during the production cycle, post-harvest processing, and storage. These factors may compromise their quality and quantity by affecting their chemical composition, physical properties, functional characteristics, and sensory attributes. Therefore, it is important to optimize the production and processing methods of canola grains and their derived products to ensure their safety, stability, and suitability for different food applications. This literature review provides a comprehensive overview of how these factors affect the quality of canola grains and their derived products. The review also suggests future research needs and challenges for enhancing canola quality and its utilization in food.

Phospholipids molecular species, proteins secondary structure, and emulsion microstructure of egg yolk with reduced polar and/or nonpolar lipids

This study investigated the phospholipids (PLs) molecular species (PLs-MS), protein secondary structure (PSS), and emulsion microstructure of the egg yolk (EY) treated with supercritical-CO₂ (T1), hexane (T2), and ethanol {at room temperature (T3) and 65 °C (T4)}. PLs-MS, PSS, and microstructure of EY emulsion were investigated with UPLC-Q-TOF-MS, Fourier-transforms infrared and Raman spectroscopy, and confocal laser scanning microscope, respectively. Predominant PLs molecular fractions were C18:0-C20:4, C18:0-C20:4, C16:0-C18:2, C16:0, C18:0-C18:2, and d18:1/16:0, for phosphatidylcholine, phosphatidylethanolamine, phosphatidylinositol, lysophosphatidylcholine, sphingomyelin, and phosphatidylserine, respectively. All the PLs-MS were highest for T1 and many of them (C14:0-C16:0, C18:0-C18:1, C18:0-C20:3) were absent in T2, T3, and T4. PSS components (α-helices, β-sheets, β-turn, and random coil) were highest for T4, followed by T3, T2, T1, and control (non-treated EY). However, T1-added o/w emulsion showed excellent stability (95.64 %) with smaller and denser oil droplets due to better ionic interactions by synergistic effect of PLs-MS and PSS components.

Comparison of interaction, structure, and cell proliferation of α-lactalbumin-safflower yellow complex induced by microwave heating or conventional heating

BACKGROUND

The protein-polyphenol interaction mechanism has always been a research hotspot, but their interaction is affected by heat treatment, which is widely applied in food processing. Moreover, the effects of microwave or water-bath heating on the protein-polyphenol interaction mechanism have been not clarified. The pasteurization condition (65 °C, 30 min) was selected to compare the effects of microwave or water bath on binding behavior, structure, and cell proliferation between α-lactalbumin (α-LA) and safflower yellow (SY), thus providing a guide for the selection of functional dairy processing conditions.

RESULTS

Microwave heat treatment of α-LA-SY resulted in stronger fluorescence quenching than that of conventional heat treatment. Moreover, the binding constant K_a of all α-LA-SY samples was augmented significantly after microwave or water bath treatment, and microwave-heated α-LA-SY showed the maximum K_a . Fourier transform infrared spectroscopy showed that microwave heating resulted in more ordered structures of α-LA into its disordered structures than water bath heating. However, the ferric reducing antioxidant power and chroma value of α-LA-SY were more reduced by microwave heating than by water bath heating. Moreover, microwave heating facilitated the cell proliferation of α-LA-SY compared with water bath treatment.

CONCLUSION

It was demonstrated that microwave heating promoted interaction between α-LA and SY more than water bath heating did. Microwave heat treatment was a safe and effective way to enhance the binding affinity of α-LA to SY, being a potential application in food industry. © 2022 Society of Chemical Industry.

Investigating the Effect of Supercritical Carbon Dioxide Treatment on the Rheological, Thermal, and Functional Properties of Plum (Prunus domestica L.) Kernel Protein Isolates

Plum kernels are a promising source of dietary proteins that are irretrievably lost during processing. The recovery of these underexploited proteins could be eminently vital for human nutrition. Plum kernel protein isolate (PKPI) was prepared and exposed to a targeted supercritical carbon dioxide (SC-CO₂) treatment to diversify its effectiveness in industrial applications. The impacts of SC-CO₂ treatment at different processing temperatures (30-70 °C) on dynamic rheology, microstructure, thermal, and techno-functional characteristics of PKPI were investigated. The results revealed that the dynamic viscoelastic characteristics of SC-CO₂-treated PKPIs showed higher storage modulus, loss modulus, and lower tan δ value than native PKPI, indicating greater strength and elasticity of the gels. Microstructural analysis showed that the proteins experienced denaturation at elevated temperatures and resulted in the formation of soluble aggregates, which increased the heat requirement for thermal denaturation of SC-CO₂-treated samples. SC-CO₂-treated PKPIs demonstrated a decline of 20.74% and 30.5% in crystallite size and crystallinity. PKPIs treated at 60 °C showed the highest dispersibility, which was 1.15-fold higher than the native PKPI sample. SC-CO₂ treatment offers a novel path to improve the techno-functional properties of PKPIs and extend its use in food and non-food applications.

Impact of different processing techniques on reduction in oil content in deep-fried donuts when using kombucha cellulose hydrolysates

To evaluate the efficiency of the oil-reducing properties of kombucha cellulose, enzymolysis and microwave-assisted enzymolysis methods were developed. The water-holding capacity of the kombucha cellulose hydrolysates formed by these two methods was higher than for the intact kombucha cellulose, while the oil-holding capacity was lower. The hydrolysates of kombucha cellulose and the intact kombucha cellulose were used to make deep-fried donuts. During this process, kombucha cellulose hydrolysates were added instead of 2% flour, and from the results, the oil content of the donut decreased significantly from ~28 to 15%, and the reduction was not related to the processing of the donut. The hardness and brittleness of all samples showed no significant change, and these samples had similar internal micro-structures, confirming texture profile analysis. In vitro digestion results suggested that there would be no adverse health effects from substituting kombucha cellulose hydrolysates in the deep-fried donut formula.

Enhancing thermal and emulsifying resilience of pomegranate fruit protein with gum Arabic conjugation

In this study, a controlled Maillard reaction was carried out to conjugate gum Arabic (GA) polymer to pomegranate protein isolate (PPI). The Maillard conjugates (MCs) were visualized by SEM and authenticity of the conjugates was assessed by NMR, FTIR, and XRD. To reveal the effect of the Maillard conjugation on the quality attributes of PPI, functional properties, thermal stability, and emulsifying behaviors of PPI and MCs were investigated. The oil binding capacity of conjugated protein (370.52%) was higher than that of protein alone (208.19%). While GA and PPI were completely degraded or decomposed at a temperature of 1000 °C, the MCs retained approximately half of the initial mass. MCs displayed higher emulsifying activity (42.71 m²/g) and emulsifying stability (90.17 (ESI30)), compared to PPI (32.61 m²/g) and (72.25 (ESI30)). Stability coefficient was significantly improved and reached from 0.64 R to 0.95 R with the usage of MCs in the emulsions. A lower centrifugal precipitation rate was determined in MCs emulsions (28.26%) compared to PPI emulsions (45.42%). Utilization of MCs instead of protein alone as a stabilizer in the oil-in-water emulsions was a logical approach for increasing their stability against environmental degradations including freeze-thaw cycle, pH, ionic, and temperature stress.

Application of emerging technologies to obtain legume protein isolates with improved techno-functional properties and health effects

Current demand of consumers for healthy and sustainable food products has led the industry to search for different sources of plant protein isolates and concentrates. Legumes represent an excellent nonanimal protein source with high-protein content. Legume species are distributed in a wide range of ecological conditions, including regions with drought conditions, making them a sustainable crop in a context of global warming. However, their use as human food is limited by the presence of antinutritional factors, such as protease inhibitors, lectins, phytates, and alkaloids, which have adverse nutritional effects. Antitechnological factors, such as fiber, tannins, and lipids, can affect the purity and protein extraction yield. Although most are removed or reduced during alkaline solubilization and isoelectric precipitation processes, some remain in the resulting protein isolates. Selection of appropriate legume genotypes and different emerging and sustainable facilitating technologies, such as high-power ultrasound, pulsed electric fields, high hydrostatic pressure, microwave, and supercritical fluids, can be applied to increase the removal of unwanted compounds. Some technologies can be used to increase protein yield. The technologies can also modify protein structure to improve digestibility, reduce allergenicity, and tune technological properties. This review summarizes recent findings regarding the use of emerging technologies to obtain high-purity protein isolates and the effects on techno-functional properties and health.

Wheat gluten proteins phosphorylated with sodium tripolyphosphate: Changes in structure to improve functional properties for expanding applications

Poor solubility of wheat gluten proteins (WG) has negative impact on functional attributes such as gelation and emulsification, which limits it use in the food industry. In this study, WG underwent different degrees of phosphorylation using sodium tripolyphosphate (STP). Phosphoric acid groups were successfully incorporated in the WG via covalent bonding (C–N–P and C–O–P) involving hydroxyl and primary amino groups from WG. The introduction of phosphoric acid groups increased the negative charge of phosphorylation-WG, which caused the enhancement of electrostatic repulsion between proteins and reduced the droplet size in emulsions, thereby allowing proteins to be more efficiently dispersed in the solution system. The change of structure induced with phosphorylation improved hydration of protein, making the WG with higher solubility, thereby resulting in the improvement of its emulsification, foaming, thermal stability, and rheological properties. Therefore, WG can be modified by phosphorylation which caused an overall improvement of functional properties, thus facilitating the expansion of WG applications.

•

Functional properties of WG were enhanced with phosphorylation (PP).

•

The P2p at 133.1 eV and the bonds of C–O–P and C–N–P were found in PP-WG.

•

Greater ζ-potential, solubility, viscosity, foaming in PP- WG.

•

Phosphorylation increased WG thermal stability and gel properties.

A Review on the Extraction and Processing of Natural Source-Derived Proteins through Eco-Innovative Approaches

In addition to their nutritional and physiological role, proteins are recognized as the major compounds responsible for the rheological properties of food products and their stability during manufacture and storage. Furthermore, proteins have been shown to be source of bioactive peptides able to exert beneficial effects on human health. In recent years, scholarly interest has focused on the incorporation of high-quality proteins into the diet. This fact, together with the new trends of consumers directed to avoid the intake of animal proteins, has boosted the search for novel and sustainable protein sources and the development of suitable, cost-affordable, and environmentally friendly technologies to extract high concentrations of valuable proteins incorporated into food products and supplements. In this review, current data on emergent and promising methodologies applied for the extraction of proteins from natural sources are summarized. Moreover, the advantages and disadvantages of these novel methods, compared with conventional methods, are detailed. Additionally, this work describes the combination of these technologies with the enzymatic hydrolysis of extracted proteins as a powerful strategy for releasing bioactive peptides.