Seasonal variation in the abundance of microplastics in three commercial bivalves from Bandon Bay, Gulf of Thailand

Characterization and risk assessment of microplastics accumulated in sediments and benthic molluscs in the mangrove wetlands along the south-west coast of India

In the present study, occurrence and characteristics of microplastics in mangrove sediments and benthic molluscs viz., black clam (Villorita cyprinoides), yellow clam (Meretrix casta), mangrove horn snail (Telescopium telescopium) and brackish water snail (Neripteron violaceum) were studied from mangrove habitats of Vembanad Lake, the largest estuary and a Ramsar site on the south-west coast of India. The average microplastic abundance in mangrove sediments varied between 235 ± 49.5 and 1414 ± 182 items/kg dry weight, with an average concentration of 673.45 ± 365.05 items/kg dry weight, which was at a relatively higher level compared to other mangrove regions of India. The highest abundance was recorded for gastropod T. telescopium (38.5 ± 11.48 items/individual). The predominant shape, colour and size of microplastic in mangrove sediment and molluscs were fragments, black and < 500 μm, respectively. The major polymers identified were polyethylene and polypropylene in sediments and molluscs. Higher values of ecological risk indices (Microplastic index and Microplastics diversity integrated index) indicated a severe microplastic pollution risk for the molluscs in the mangroves. The high bio-accumulation factor also highlights the possibility of using these species as bioindicators of plastic pollution in mangrove habitats. The results of the present study could be useful to prepare effective management strategy to minimize plastic pollution load in mangrove habitats.

Risk assessments of microplastic exposure in bivalves living in the coral reefs of Vietnam

This study aimed to assess the presence of microplastics in bottom sediment and bivalve species, including Pinna bicolor, Atrina vexillum, Saccostrea sp., and Pinctada margaritifera, living in coral reefs on Vietnam's Southern coastal. The average microplastic abundance were 0.45 ± 0.13 items/g of wet soft tissue weight or 5.60 ± 1.49 items/individual in bivalve samples and 294 ± 43 items/kg dry weight of sediment samples. The fragment shape, size smaller than 100 μm, and polyethylene, polyamide, cellophane and polyethylene terephthalate were identified as the predominant constituents of the microplastics. The pollution load and potential ecological risk index of microplastics were at a minor level, whereas the polymer hazard index was at a high level. Overall, this study provides a basis for assessing the risks posed by microplastics in the marine ecosystems of Vietnam.

The occurrence and exposure of microplastics in bivalves from Qingdao, China

This study investigated the regional, seasonal, and species abundance and characteristics of microplastics (MPs) in bivalves from Qingdao, China and assessed the dietary exposure of MPs through bivalve consumption. The average abundance was 1.17 ± 1.07 items/individual or 0.17 ± 0.22 items/g wet weight. Fiber was the dominant shape (91.5 %). The average size of MPs was 995.63 ± 796.59 μm. Rayon, PE, and PET contributed mostly to the MPs composition. There were no significant regional or seasonal differences in MPs abundance (p > 0.05), while there were significant species differences (p < 0.05) when describing the abundance by wet weight. The estimated daily intakes of MPs through bivalve consumption by general population, consumer only population, and coastal residents in China were 3.32 × 10-3, 0.08, and 0.16 μg/kg BW, respectively. The exposure assessment method by converting the quantity of MPs into mass may facilitate the risk characterization in the future.

Beneath the surface: Exploring microplastic intricacies in Anadara granosa

Anadara granosa or blood cockles have been reported to be a candidate for biomonitoring agents due to their sedimentary nature and their nutrient uptake mechanisms. Yet, this bivalve is still regarded as a delicacy in Asian cuisine. Malaysia is the largest exporter of this sea product that contaminated cockles may also be experienced by the importing countries. However, the bioaccumulation of microplastics in A. granosa cultivated in Malaysia has not been extensively studied. It is crucial to comprehend the risk posed to humans by consuming A. granosa in their diet. Therefore, the purpose of this research is to investigate the levels of microplastic accumulation in A. granosa from major exporters in Peninsular Malaysia, to evaluate the associated risk of microplastics on the species, and to estimate daily human consumption of microplastics through the consumption of A. granosa. The abundance of microplastics was quantified through the use of a stereo microscope, and the polymer type was determined using FTIR and micro-FTIR. Findings from this investigation revealed that all samples of A. granosa were contaminated with microplastics, with the highest levels of accumulation found in bivalves collected from the west coast (0.26 ± 0.15 particles/g) of Peninsular Malaysia. Fragment and fiber microplastics, measuring between 0.05 and 0.1 mm in size, were found to be the most prevalent in A. granosa, with blue being the dominant identified colour and rayon being the most common polymer type. Microplastic risk assessment due to the presence of polyacrylate, polycarbonate (PC), and polymethyl methacrylate (PMMA) resulted in a high risk of contamination for A. granosa. It was further determined that the current estimated dietary intake (EDI) suggests that consumers of A. granosa uptake approximately 21.8-93.5 particles/person/year of microplastics. This study highlights that A. granosa accumulates microplastics, which could potentially result in bioaccumulation and biomagnification in humans through consumption.

Microplastic contamination in some beverages marketed in türkiye: Characteristics, dietary exposure and risk assessment

In this study, microplastic contamination in water, natural mineral water and mineral water, sparkling soft drinks, cold tea and some traditional beverages marketed in Türkiye were assessed. Microplastics physically and chemically characterized by microscope and ATR/FT-IR, respectively. Microplastics were detected in 9 out of 47 beverage samples. A total of 250 microplastics with 5 different polymers, 2 different shapes, and 7 different colours were detected in 47 beverage samples. The average microplastic concentration was 2.24 ± 9.86 particles/L for all beverages analysed. The highest average microplastic concentration was found in mineral waters in glass bottles (average 11.3 particles/L). No microplastics were found in cold tea and other drinks. The total annual microplastic exposure from beverage consumption in male and female individuals aged >15 years was 2029 and 1786 particles/mL/year, respectively. The microplastic load index category of all beverage samples was determined as "moderate". The average pRi level of all beverages was 117 ± 260 and the risk level was determined as "low". The study provides evidence that microplastics are common in beverages and that microplastics are directly ingested by humans.

Nano-scale and micron-scale plastics amplify the bioaccumulation of benzophenone-3 and ciprofloxacin, as well as their co-exposure effect on disturbing the antioxidant defense system in mussels, Perna viridis

Plastics ranging from nano-scale to micron-scale are frequently ingested by many marine animals. These particles exhibit biotoxicity and additionally perform as vectors that convey and amass adsorbed chemicals within organisms. Meanwhile, the frequency of detection of the benzophenone-3 and ciprofloxacin can be adsorbed on plastic particles, then accumulated in bivalves, causing biotoxicity. To understand their unknown accumulative kinetics in vivo affected by different plastic sizes and toxic effect from co-exposure, several scenarios were set up in which the mode organism were exposed to 0.6 mg/L of polystyrene carrying benzophenone-3 and ciprofloxacin in three sizes (300 nm, 38 μm, and 0.6 mm). The live Asian green mussels were chosen as mode organism for exposure experiments, in which they were exposed to environments with plastics of different sizes laden with benzophenone-3 and ciprofloxacin, then depurated for 7 days. The bioaccumulation and depuration kinetics of benzophenone-3 and ciprofloxacin were measured using HPLC-MS/MS after one week of exposure and depuration. Meanwhile, their toxic effect were investigated by measuring the changes in six biomarkers (condition index, reactive oxygen species, catalase, glutathione, lipid peroxidation, cytochrome P450 and DNA damage). The bioconcentration factors in mussels under different exposure conditions were 41.48-111.75 for benzophenone-3 and 6.45 to 12.35 for ciprofloxacin. The results suggested that microplastics and nanoplastics can act as carriers to increase bioaccumulation and toxicity of adsorbates in mussels in a size-dependent manner. Overproduction of reactive oxygen species caused by microplastics and nanoplastics led to increased DNA damage, lipid peroxidation, and changes in antioxidant enzymes and non-enzymatic antioxidants during exposure. Marked disruption of antioxidant defenses and genotoxic effects in mussels during depuration indicated impaired recovery. Compared to micron-scale plastic with sizes over a hundred micrometers that had little effect on bivalve bioaccumulation and toxicity, nano-scale plastic greatly enhanced the biotoxicity effect.

Detection of plastic, cellulosic micro-fragments and microfibers in Laternula elliptica from King George Island (Maritime Antarctica)

It is generally acknowledged that microplastic pollutants are prevalent in ocean waters and sediments across a range of tropical, temperate, subpolar, and polar regions. The waters surrounding King George Island are significantly impacted by human activities, particularly those related to scientific stations, fishing, and tourism. Organisms, such as Laternula elliptica, can be used as environmental monitors due to the likelihood that they will bioaccumulate pollutants. The goal of this study was to quantify and identify plastic and cellulosic micro-fragments and microfibers present in the soft body of clams (n = 21), collected from Fildes Bay near sewage and wastewater discharges. Plastic and cellulose microfragments and microfibers were counted, and their compositions were determined using FT-IR. All 21 individuals sampled contained fragments and fibers, with a total of 900 items detected (42.86 ± 25.36 mean ± SD items per individual), or 1.82 items g.wet mass-1. 58 % of items were cellulose and 22 % plastic. Considering the plastic polymer compositions, 28.57 % were polyethylene terephthalate (PET), 21.43 % acrylic, 14.29 % high-density polyethylene (HDPE), 14.29 % Polypropylene (PP), 7.14 % ultra-high drawn polyethylene filament (UHMWPE), 7.14 % polyester and 7.14 % Polyethylene. The quantities and prevalence of MP in L. elliptica were higher than those found in other Antarctic marine species, and even in bivalves from populated regions of the world. Our work assessed the pollution status of L. elliptica near an effluent of wastewater plants and found that 95 % of individuals displayed MP and 100 % microfibers that could impact their population.

Evaluation of the microplastics in bivalves and water column at Pantai Teluk Likas, North Borneo, Malaysia

Microplastics (MPs) are a pervasive pollutant in the marine environment. Pantai Teluk Likas in Sabah, Malaysia is one of the most visited beaches where tourism, recreational, and fisheries activities are high in this area. Hence, the area suffers from severe pollution, particularly from plastics. This study aims to quantify the microplastic composition in terms of color, shapes, and polymer types in marine bivalves (Anadara granosa, Glauconome virens, and Meretrix lyrata) and water column samples from Pantai Teluk Likas. All samples were digested using sodium hydroxide (NaOH) and incubated in the oven for at least 48 h. Serial filtration was done for each sample before they were observed under the dissecting microscope. The microplastics were identified and counted based on their physical attributes which were colors and shapes. The functional group of the polymers was determined using FTIR spectroscopy. Microplastics were found present in all samples collected. G. virens had the highest abundance of microplastics at 113.6 ± 6.5 particles/g followed by M. lyrata at 78.4 ± 3.7 particles/g. On the contrary, A. granosa had the least microplastics with an abundance of 24.4 ± 0.6 particles/g. Meanwhile, 110.0 ± 36.2 particles/L of microplastics were found in water column samples from Pantai Teluk Likas. Based on the analysis, fibers were the most common shape in bivalves, while fibers and films were common in the water column. In terms of colors, black, blue, and red were a few of the most abundant colors observed in both samples. The most common polymer detected in all bivalve species and water column samples is polycarbonate (PC), followed by polymethyl methacrylate (PMMA). Future study that focuses on the correlation between microplastic abundance in the marine biota and the water column is recommended to better understand microplastic availability and exposure.