Lipophilic chiral cobalt (III) complexes of hexaamine ligands: Efficacies as enantioselective hydrogen bond donor catalysts

High Seebeck coefficient thermogalvanic cells via the solvent-sensitive charge additivity of cobalt 1,8-diaminosarcophagine

Thermogalvanic devices can chemically convert low grade (<200 °C) waste thermal energy into electrical energy. A temperature gradient across the device drives an entropically favourable electrochemical redox reaction, resulting in continuous current production. The voltage correlates with the entropy change during the redox reaction, which favours high valence metal complexes with high charge densities. Here we investigate cobalt (II/III) sarcophagine ([Co(SAR)]^2+/3+) for application in thermogalvanic cells, as a function of solvent; the two uncoordinated amine groups 1,8-diaminosarcophagine are typically protonated to form tetracationic/pentacationic [Co(SARH₂)]^4+/5+. In water, [Co(SARH₂)]^4+/5+ gave a thermogalvanic Seebeck coefficient (S_e) of +0.43 mV K^-1, which is entropically consistent with just the Co^2+/3+ core valence, whereas DMSO and ionic liquid solvents gave S_e values of +1.84 and +2.04 mV K^-1, respectively, in line with the 'Co^4+/5+' overall complex. This work proves how the ionic charge on pendant moieties can undergo charge-additivity with the metal core to significantly boost entropically-driven processes, but only in suitably low dielectric and bulky solvents.

Family of Well-Defined Chiral-at-Cobalt(III) Complexes as Metal-Templated Hydrogen-Bond-Donor Catalysts: Effect of Chirality at the Metal Center on the Stereochemical Outcome of the Reaction

A family of well-defined Λ- and Δ-diastereomeric octahedral cationic chiral-at-cobalt complexes were obtained by a simple two-step reaction of (R,R)-1,2-diaminocyclohexane, (R,R)-1,2-diphenylethylenediamine, or (S)-2-(aminomethyl)pyrrolidine and substituted salicylaldehydes with a cobalt(III) salt. It was observed for the first time that the use of an excess of cobalt(III) salt provides both the enantiopure Λ and Δ forms of the corresponding cobalt(III) complexes 1 and 2 in a ratio of diastereomers ranging from 1:1.6 to >20:1 (Λ/Δ) and in 31-95% combined yields. The obtained complexes were robust, air- and bench-stable, soluble in most of organic solvents, and insoluble in water. Through variation of the substituents in the phenyl ring of the salicylaldehyde moiety, it was shown that both steric and electronic effects of substituents have a significant impact on the formation of Λ and Δ isomers. Next, the efficacies of the enantiopure metal-templated complexes 1-3 were investigated in three benchmark asymmetric reactions in order to compare their catalytic activity. The chiral cobalt(III) complexes 1-3 were tested as enantioselective hydrogen-bond-donor catalysts in such important reactions as the Michael addition of the O'Donnell substrate to methyl acrylate, epoxidation of chalcone, and trimethylsilylcyanation of benzaldehyde. It was clearly demonstrated that the chirality at the cobalt center has an impact on the stereochemical outcome of the reactions. In particular, the Λ(R,R)-1 and Δ(R,R)-1 complexes acted as "pseudoenantiomeric" catalysts in the epoxidation and trimethylsilylcyanoation reactions, providing both enantiomers of the products with up to 57% enantiomeric excess.

Synthesis and a Catalytic Study of Diastereomeric Cationic Chiral-at-Cobalt Complexes Based on (R,R)-1,2-Diphenylethylenediamine

Here we report the first synthesis of two diastereomeric cationic octahedral Co(III) complexes based on commercially available (R,R)-1,2-diphenylethylenediamine and salicylaldehyde. Both diastereoisomers with opposite chiralities at the metal center (Λ and Δ configurations) were prepared. The new Co(III) complexes possessed both acidic hydrogen-bond donating (HBD) NH moieties and nucleophilic counteranions and operate as bifunctional chiral catalysts for the challenging kinetic resolution of terminal and disubstituted epoxides by the reaction with CO₂ under mild conditions. The highest selectivity factor (s) of 2.8 for the trans-chalcone epoxide was achieved at low catalyst loading (2 mol %) in chlorobenzene, which is the best achieved result currently for this type of substrate.

Enantioselective "organocatalysis in disguise" by the ligand sphere of chiral metal-templated complexes

Asymmetric catalysis holds a prominent position among the important developments in chemistry during the 20th century. This was acknowledged by the 2001 Nobel Prize in chemistry awarded to Knowles, Noyori, and Sharpless for their development of chiral metal catalysts for organic transformations. The key feature of the catalysts was the crucial role of the chiral ligand and the nature of the metal ions, which promoted the catalytic conversions of the substrates via direct coordination. Subsequently the development of asymmetric organic catalysis opened new avenues to the synthesis of enantiopure compounds, avoiding any use of metal ions. Recently, an alternative approach to asymmetric catalysis emerged that relied on the catalytic functions of the ligands themselves boosted by coordination to metal ions. In other words, in these hybrid chiral catalysts the substrates are activated not by the metal ions but by the ligands. The activation and enantioselective control occurred via well-orchestrated and custom-tailored non-covalent interactions of the substrates with the ligand sphere of chiral metal complexes. In these metal-templated catalysts, the metal served either as a template (a purely structural role), or it constituted the exclusive source of chirality (metal-centred chirality due to the spatial arrangement of achiral or chiral bi-/tridentate ligands around an octahedral metal centre), and/or it increased the Brønsted acidity of the ligands. Although the field is still in its infancy, it represents an inspiring combination of both metal and organic catalysis and holds major unexplored potential to push the frontiers of asymmetric catalysis. Here we present an overview of this emerging field discussing the principles, applications and perspectives on the catalytic use of chiral metal complexes that operate as "organocatalysts in disguise". It has been demonstrated that these chiral metal complexes are efficient and provide high stereoselective control in asymmetric hydrogen bonding catalysis, phase-transfer catalysis, Brønsted acid/base catalysis, enamine catalysis, nucleophilic catalysis, and photocatalysis as well as bifunctional catalysis. Also, many of the catalysts have been identified as highly effective catalysts at remarkably low catalyst loadings. These hybrid systems offer many opportunities in the synthesis of chiral compounds and represent promising alternatives to metal-based and organocatalytic asymmetric transformations.

Expanding the Family of Octahedral Chiral-at-Metal Cobalt(III) Catalysts by Introducing Tertiary Amine Moiety into the Ligand

Chiral metal-templated complexes are attractive catalysts for organic synthetic transformations. Herein, we introduce a novel chiral cobalt(III)-templated complex based on chiral trans-3,4-diamino-1-benzylpyrrolidine and 3,5-di-tert-butyl-salicylaldehyde which features both hydrogen bond donor and Brønsted base functionalities. The obtained complexes were fully characterized by 1H, 13C NMR, IR-, UV-vis, CD-spectroscopy and by a single X-ray diffraction analysis. It was shown that chlorine anion is connected with amino groups of the complex via a hydrogen bonding. DFT calculations of charges and molecular electrostatic potential of the cobalt(III) complex showed that the basicity of the complex is certainly diminished as compared with the routine tertiary amines but the acidity of the conjugated acid of the complex should be increased. Thus, the catalytic potential of the complex may be much greater as a chiral acid than a chiral base. We believe that this work opens a new way in chiral bifunctional catalyst design.

An octahedral cobalt(iii) complex based on cheap 1,2-phenylenediamine as a bifunctional metal-templated hydrogen bond donor catalyst for fixation of CO2 with epoxides under ambient conditions

An octahedral cobalt(iii) complex based on cheap 1,2-phenylenediamine operates as an efficient bifunctional hydrogen bond donor catalyst in cycloaddition of epoxides with CO₂ under ambient conditions and solvent- and co-catalyst-free conditions.

Solvent free enantioselective catalysis with chiral cobalt(iii) Werner complexes via ball milling

The title technique is applied for the first time to cobalt(iii) hydrogen bond donor catalysts, a large family of recently developed salts that enable numerous enantioselective organic reactions and feature an earth abundant metal.

Launching Werner Complexes into the Modern Era of Catalytic Enantioselective Organic Synthesis

Reactions catalyzed by transition metal complexes almost always entail binding of one or more reactants to the metal center, and nearly every corner of the "chiral pool" has been picked over in efforts to develop enantioselective catalysts. As reported by Alfred Werner in 1911-1912, salts of the formally D₃-symmetric [Co(en)₃]³⁺ trication (en = ethylenediamine) were among the first chiral inorganic compounds to be resolved into enantiomers. These air- and water-stable complexes are substitution-inert, so for 100 years they languished without application in organic synthesis. We then showed that when they are rendered soluble in organic media by lipophilic anions such as fluorinated tetraarylborates BAr_f^-, they become potent catalysts for a variety of carbon-carbon and carbon-heteroatom bond forming reactions.These involve substrate activation by hydrogen bonding to the coordinated NH₂ units (pK_a ca. 15), a "second coordination sphere" mechanism. Only modest enantioselectivities are obtained with [Co(en)₃]³⁺ 3BAr_f^- or related chromium, rhodium, iridium, and platinum salts. However, high enantioselectivities are achieved when the three en ligands are replaced by the 1,2-diphenyl analogues (S,S)- or (R,R)-H₂NCHPhCHPhNH₂. Here only one BAr_f^- anion is required to solubilize the trication, so a number of mixed-salt catalysts (2X^-BAr_f^-) have been evaluated. Alternatively, a dimethylamino group can be tethered to the backbone of one en ligand, providing bifunctional catalysts that obviate any need for an external base. Interestingly, the counteranions modulate the enantioselectivities somewhat. However, catalysts with chiral anions do not significantly outperform benchmark catalysts with achiral anions. Cagelike chiral hexaaminecobalt(III) complexes known as sepulchrates and sarcophagines, which feature secondary NH donor atoms, can also serve as catalysts, but the enantioselectivities are very low.In a spinoff application, certain salts are found to be superb "chiral solvating agents", leading to distinct sets of NMR signals for enantiomers of chiral analytes with Lewis basic functional groups. Loadings of 10-25 mol % generally suffice, providing the best way of assaying the enantiomeric purities of a host of compounds. Also, mixtures of several chiral compounds can be simultaneously analyzed. It is not surprising that complexes that perform well in chiral recognition phenomena also excel as enantioselective catalysts.In this Account, the stereochemical properties of the preceding complexes are treated, as well as arcana generally known only to specialists in the field. These include the use of charcoal for equilibrating configurations of the cobalt stereocenter and Sephadex for separating enantiomers and diastereomers. Other types of metal-containing hydrogen-bond-donor catalysts are briefly surveyed (noncoordinating NH units can also be effective), including several developed by other groups. However, the mechanisms of enantioselection in all of these transformations remain obscure. The optimum diastereomer and anion set varies from reaction to reaction, suggesting a "phenotypic plasticity" that allows adaption to a variety of processes.

Rendering classical hydrophilic enantiopure Werner salts [M(en)3]n+nX- lipophilic (M/n = Cr/3, Co/3, Rh/3, Ir/3, Pt/4); new chiral hydrogen bond donor catalysts and enantioselectivities as a function of metal and charge

Known hydrophilic halide salts of the title compounds are converted to new lipophilic BArf- (B(3,5-C6H3(CF3)2)4-) salts. These are isolated as hydrates (Λ- or Δ-[M(en)3]n+nBArf-·zH2O; z = 17-9) and characterized by NMR (acetone-d6) and microanalyses. Thermal stabilities are probed by capillary thermolyses and TGA and DSC measurements (onset of dehydration 71-151 °C). In the presence of tertiary amines, they are effective catalysts for enantioselective Michael type carbon-carbon or carbon-nitrogen bond forming additions of 1,3-dicarbonyl compounds (acceptors: trans-β-nitrostyrene, di-tert-butylazodicarboxylate, 2-cyclopenten-1-one; average ee = 33%, 52%, 17%). Effects of the metal and charge upon enantioselectivities are analyzed. A number of properties appear to correlate to the NH Brønsted acidity order ([Pt(en)3]4+ > [Cr(en)3]3+ > [Co(en)3]3+ > [Rh(en)3]3+ > [Ir(en)3]3+).