Construction of two cobalt based bi-functional metal-organic frameworks for enhancing electrocatalytic water oxidation and photocatalytic disposals of hazardous aromatic dyes

Silicon dioxide layer thickness-dependent Aunanocube@mSiO2@Ag with surface enhanced Raman scattering for trace detection of harmful substances

Aunanocube@mSiO2@Ag nanocomposites were synthesized by layer-by-layer assembly with an Au nanocube core, an Ag shell, and mesoporous silica as a spacer. The thickness of the mesoporous silica layer was controlled simply by changing the amount of silica precursor. The SERS activity of the nanocomposites varied with the thickness of the SiO2 spacer layer, and the strongest SERS effect was observed when the optimized silica layer thickness was about 6 nm. The sensitivity of the synthesized nanocomposites was tested using typical representatives of organic dyes and pesticides (rhodamine 6G, crystal violet, and thiram) as probes, which have very low detection limits of 10-12, 10-11 and 10-9 M, respectively, and good stability was observed. The SERS performance of Aunanocube@mSiO2@Ag changed with the change of the thickness of SiO2, and Aunanocube@mSiO2@Ag with appropriate SiO2 thickness showed excellent SERS performance. When the thickness of the SiO2 layer is 6.0 nm, the SERS signal is strongest. It has the advantages of a fast response speed, simple operation, low detection limit and good pollutant detection ability.

Rational Design and Synthesis of Fe-Doped Co-Based Coordination Polymer Composite Photocatalysts for the Degradation of Norfloxacin and Ciprofloxacin

The solar light-responsive Fe-doped Co-based coordination polymer (Fe@Co-CP) photocatalyst was synthesized under mild conditions. [Co(4-padpe)(1,3-BDC)]n (Co-CP) was first constructed using mixed ligands through the hydrothermal method. Then, Fe was introduced into the Co-CP framework to achieve the enhanced photocatalytic activity. The optimal Fe@Co-CP-2 exhibited excellent catalytic degradation performance for norfloxacin and ciprofloxacin under sunlight irradiation without auxiliary oxidants, and the degradation rates were 91.25 and 92.66% in 120 min. These excellent photocatalytic properties were ascribed to the generation of the Fe-O bond, which not only enhanced the light absorption intensity but also accelerated the separation efficiency of electrons and holes, and hence significantly improved the photocatalytic property of the composites. Meanwhile, Fe@Co-CP-2 displayed excellent stability and reusability. In addition, the degradation pathways and intermediates of antibiotic molecules were effectively analyzed. The free radical scavenging experiment and ESR results confirmed that •OH, •O2-, and h+ active species were involved in the catalytic degradation reaction; the corresponding mechanisms were deeply investigated. This study provides a fresh approach for constructing Fe-doped Co-CP-based composite materials as photocatalysts for degradation of antibiotic contaminants.

Synthesis of bimetal MOFs for rapid removal of doxorubicin in water by advanced oxidation method

Doxorubicin (DOX) has been an emerging environmental pollutant due to its significant genotoxicity to mankind. Advanced oxidation processes are a potential strategy to remove DOX in water solution. To develop a highly efficient catalytic agent to remove DOX, bimetal MOFs were synthesized, with Cu²⁺ and Co²⁺ as the central ions and adenine as the organic ligand. This study investigated the degradation of DOX by Co/Cu-MOFs combined with peroxymonosulfate (PMS). It was found that the degradation of DOX by Co/Cu-MOFs can reach 80% in only 10 seconds. This can be explained by the charge transfer from Co(iii) to Co(ii) being accelerated by Cu²⁺, resulting in the rapid generation of free radicals, which was proved by the EIS Nyquist diagram. Co/Cu-MOFs can be reused by simply washing with water without inactivation. Therefore, Co/Cu-MOFs can be used as an efficient catalytic agent to degrade DOX in environmental water.

Electrochemically enhanced adsorption of organic dyes from aqueous using a freestanding metal-organic frameworks/cellulose-derived porous monolithic carbon foam

Monolithic carbon foams are promising materials for adsorption due to the easy recyclability and without secondary-pollution. However, poor adsorption efficiency for organic pollutants limits its practical application. Hence, this work proposed a novel monolithic porous carbon foam by a facile carbonization approach as freestanding electrodes to remove the organic dyes. The prepared carbon foam derived from waste cigarette filters and zeolitic-imidazolate frameworks-8 with well-developed pores, and the calculated surface area is 1457 m²·g^-1, and exhibited an outstanding removal efficiency for methylene blue in aqueous. The maximum adsorption capacity for methylene blue can reach up to 1846.7 mg·g^-1 under the applied voltage of -1.2 V. Importantly, as-prepared carbon foams possessed excellent stability, and the removal efficiency can remain above 85% after 5 cycles. Thus, obtained porous carbon foams in this paper as a free standing electrode is expected to be promising materials of adsorbent besides supercapacitors.

Insight into the Photocatalytic Activity of Cobalt-Based Metal–Organic Frameworks and Their Composites

Nowadays, materials with great potential for environmental protection are being sought. Metal–organic frameworks, in particular those with cobalt species as active sites, have drawn considerable interest due to their excellent properties. This review focuses on describing cobalt-based MOFs in the context of light-triggered processes, including dye degradation, water oxidation and splitting, carbon dioxide reduction, in addition to the oxidation of organic compounds. With the use of Co-based MOFs (e.g., ZIF-67, Co-MOF-74) as photocatalysts in these reactions, even over 90% degradation efficiencies of various dyes (e.g., methylene blue) can be achieved. Co-based MOFs also show high TOF/TON values in water splitting processes and CO2-to-CO conversion. Additionally, the majority of alcohols may be converted to aldehydes with efficiencies exceeding 90% and high selectivity. Since Co-based MOFs are effective photocatalysts, they can be applied in the elimination of toxic contaminants that endanger the environment.