Spoligotyping of Mycobacterium tuberculosis complex isolates using hydrogel oligonucleotide microarrays

Spoligotyping of the Mycobacterium tuberculosis complex using on-Chip PCR

AIMS

The aim of this study was to develop a rapid PCR-based method for spoligotyping of Mycobacteria in the microarray format and to compare it to conventional spoligotyping by hybridization.

METHODS AND RESULTS

The method employs the on-Chip PCR technique with primers specific for 43 spacers that separate direct repeats (DRs) in the DR region of mycobacterial DNA. The primers were immobilized on gel-based microarrays, and PCR was performed directly on the chips. The PCR fluorescence images were acquired and processed using a portable fluorescence analyzer equipped with dedicated software. Analysis takes 1.5-2 hours and can be carried out on clinical samples without additional handling. The analytical sensitivity of the method was 103 copies of target DNA. The spoligotyping results of 51 samples produced by the proposed method and by conventional reverse hybridization approach were in full concordance.

CONCLUSIONS

High throughput capacity, computerized data analysis, compact equipment, and reliable results make the on-Chip PCR an attractive alternative to intra- and interspecific spoligotyping of Mycobacterium tuberculosis complex bacteria.

SIGNIFICANCE AND IMPACT OF STUDY

Fast microarray-based spoligotyping technique using on-Chip PCR was developed.

Development of Multiplex RT-PCR with Immobilized Primers for Identification of Infectious Human Pneumonia Pathogens

A prototype of a system for the detection of infectious human pneumonia pathogens based on multiplex solid-phase reverse transcription PCR (RT-PCR) was developed. Primers were designed to identify the DNA of six bacterial pneumonia pathogen strains, and the RNA of two viral pathogens of pneumonia: influenza A and SARS-CoV-2. The signal accumulation of elongated immobilized primers occurs due to the incorporation of fluorescently labeled nucleotides in the chain. The signal is detected after all the components of the mixture are removed, which significantly reduces the background signal and increases the sensitivity of the analysis. The use of a specialized detector makes it possible to read the signals of elongated primers directly through the transparent cover film of the reaction chamber. This solution is designed to prevent cross-contamination and is suitable for simultaneous testing of a large number of test samples. The proposed platform is able to detect the presence of several pathogens of pneumonia in a sample and has an open architecture that allows expansion of the range of pathogenic bacteria and viruses that can be detected.

Development of a microfluidic biosensor for the diagnostics and typing of <i>Mycobacterium Tuberculosis</i>

Background. Despite on the general trend towards decreasing the incidence of newly diagnosed active forms of tuberculosis, the situation with spreading of this disease in Russian Federation remains extremely tense. At the same time, the diagnosis is carried out according to the standard scheme, which takes about a month; another month takes test formulation for drug sensitivity. Thus, the development of new methods for diagnostics and typing of mycobacteria, as well as practice implementation of these developments is an urgent direction. Modern developments in the field of microfluidic technologies open up great opportunities in this direction. Aim. Development of a method for identification and typing of Mycobacterium tuberculosis using a label-free biosensor on surface waves in a one-dimensional photonic crystal (PC SM biosensor). Methods. Oligonucleotide probes were selected and synthesized as DNA targets for M. tuberculosis typing. The photonic crystal surface was modified with aqueous solutions of (3-aminopropyl)triethoxysilane, Leuconostoc mesenteroides dextrans and bovine serum albumin. Experiments were carried out using a PC SM biosensor. Results. Sequences of detecting oligonucleotide probes were selected for spoligotyping of M. tuberculosis on the PC SM biosensor. Modification of their 3'-ends was carried out in order to create extended single-stranded regions that are not subject to the formation of secondary structures and facilitate hybridization with a single-stranded DNA target. Several series of experimental modifications of the PC surface were carried out by using L. mesenteroides dextrans with different functional groups (including detection of the modification results real time) with simultaneous registration of the increment layer size and volume refractive index of the mixture, which excludes the use of a reference cell. Other experiments were carried out to detect the specific binding of biotinylated oligonucleotide probes to the modified PC surface. Conclusions. A technique for the design of probes was developed and a model system of oligonucleotides for the detection of single-stranded DNA using a PC biosensor was proposed. The developed technique of modification of the PC surface with dextrans from L. mesenteroides, which allows to increase the sensitivity of detection of oligonucleotides using the PC SM biosensor. This approach will further expand the panel of diagnostic probes, including identification of resistance markers.

Mycobacterium bovis: From Genotyping to Genome Sequencing

Mycobacterium bovis is the main pathogen of bovine, zoonotic, and wildlife tuberculosis. Despite the existence of programs for bovine tuberculosis (bTB) control in many regions, the disease remains a challenge for the veterinary and public health sectors, especially in developing countries and in high-income nations with wildlife reservoirs. Current bTB control programs are mostly based on test-and-slaughter, movement restrictions, and post-mortem inspection measures. In certain settings, contact tracing and surveillance has benefited from M. bovis genotyping techniques. More recently, whole-genome sequencing (WGS) has become the preferential technique to inform outbreak response through contact tracing and source identification for many infectious diseases. As the cost per genome decreases, the application of WGS to bTB control programs is inevitable moving forward. However, there are technical challenges in data analyses and interpretation that hinder the implementation of M. bovis WGS as a molecular epidemiology tool. Therefore, the aim of this review is to describe M. bovis genotyping techniques and discuss current standards and challenges of the use of M. bovis WGS for transmission investigation, surveillance, and global lineages distribution. We compiled a series of associated research gaps to be explored with the ultimate goal of implementing M. bovis WGS in a standardized manner in bTB control programs.

Metabolic Changes of Mycobacterium tuberculosis during the Anti-Tuberculosis Therapy

Tuberculosis, caused by Mycobacterium tuberculosis complex bacteria, remains one of the most pressing health problems. Despite the general trend towards reduction of the disease incidence rate, the situation remains extremely tense due to the distribution of the resistant forms. Most often, these strains emerge through the intra-host microevolution of the pathogen during treatment failure. In the present study, the focus was on three serial clinical isolates of Mycobacterium tuberculosis Beijing B0/W148 cluster from one patient with pulmonary tuberculosis, to evaluate their changes in metabolism during anti-tuberculosis therapy. Using whole genome sequencing (WGS), 9 polymorphisms were determined, which occurred in a stepwise or transient manner during treatment and were linked to the resistance (GyrA D94A; inhA t-8a) or virulence. The effect of the inhA t-8a mutation was confirmed on both proteomic and transcriptomic levels. Additionally, the amount of RpsL protein, which is a target of anti-tuberculosis drugs, was reduced. At the systemic level, profound changes in metabolism, linked to the evolution of the pathogen in the host and the effects of therapy, were documented. An overabundance of the FAS-II system proteins (HtdX, HtdY) and expression changes in the virulence factors have been observed at the RNA and protein levels.

System OMICs analysis of Mycobacterium tuberculosis Beijing B0/W148 cluster

Mycobacterium tuberculosis Beijing B0/W148 is one of the most widely distributed clusters in the Russian Federation and in some countries of the former Soviet Union. Recent studies have improved our understanding of the reasons for the “success” of the cluster but this area remains incompletely studied. Here, we focused on the system omics analysis of the RUS_B0 strain belonging to the Beijing B0/W148 cluster. Completed genome sequence of RUS_B0 (CP020093.1) and a collection of WGS for 394 cluster strains were used to describe the main genetic features of the population. In turn, proteome and transcriptome studies allowed to confirm the genomic data and to identify a number of finds that have not previously been described. Our results demonstrated that expression of the whiB6 which contains cluster-specific polymorphism (a151c) increased almost 40 times in RUS_B0. Additionally, the level of ethA transcripts in RUS_B0 was increased by more than 7 times compared to the H37Rv. Start sites for 10 genes were corrected based on the combination of proteomic and transcriptomic data. Additionally, based on the omics approach, we identified 5 new genes. In summary, our analysis allowed us to summarize the available results and also to obtain fundamentally new data.

Spoligotyping analysis of Mycobacterium tuberculosis in Khyber Pakhtunkhwa area, Pakistan

Background: Spoligotyping is a reproducible, reverse hybridization approach for genotyping of Mycobacterium tuberculosis complex (MTBC). Molecular typing of MTBC is helpful for understanding and controlling tuberculosis epidemics.

Methods: Spoligotyping was performed on 166 clinical isolates of Mycobacterium tuberculosis (MTB) collected from 25 districts of Khyber Pakhtunkhwa, Pakistan. Results were compared to SITVIT2, an online database developed by the Institut Pasteur de la Guadeloupe, France.

Results: Spoligotyping results showed that 145 strains (88%) displayed known patterns while 21 (12%) were new. Lineage 3/Central Asian strain (L3/CAS) was the predominant family (73%, χ²=19.9, P=0.001), followed by L2/Beijing (5.4%) and L4 (4.2%). L3/CAS1-Delhi was the major sublineage (82%) among the L3/CAS family (χ²=664, P=0.0001). Analysis showed that the majority of the clinical isolates with an unknown pattern had an evolutionary link with the L3/CAS strain, and nine (5.4%) of the unknown strains were epidemiologically linked and were tentatively named L3/CAS-KP (Khyber Pakhtunkhwa).

Conclusion: The present study demonstrated that L3/CAS is the predominant lineage of MTB, widely distributed in different areas of the Khyber Pakhtunkhwa province of Pakistan. Spoligotyping patterns of some clinical isolates could not be matched to other reported patterns in an international database. Other tools, such as mycobacterial interspersed repetitive unit–variable number tandem repeat (MIRU-VNTR), will be helpful in future investigations into the epidemiological characteristics of clinical isolates in the Khyber Pakhtunkhwa province.

Epidemiology of transmissible diseases: Array hybridization and next generation sequencing as universal nucleic acid-mediated typing tools

The magnitude of interest in the epidemiology of transmissible human diseases is reflected in the vast number of tools and methods developed recently with the expressed purpose to characterize and track evolutionary changes that occur in agents of these diseases over time. Within the past decade a new suite of such tools has become available with the emergence of the so-called "omics" technologies. Among these, two are exponents of the ongoing genomic revolution. Firstly, high-density nucleic acid probe arrays have been proposed and developed using various chemical and physical approaches. Via hybridization-mediated detection of entire genes or genetic polymorphisms in such genes and intergenic regions these so called "DNA chips" have been successfully applied for distinguishing very closely related microbial species and strains. Second and even more phenomenal, next generation sequencing (NGS) has facilitated the assessment of the complete nucleotide sequence of entire microbial genomes. This technology currently provides the most detailed level of bacterial genotyping and hence allows for the resolution of microbial spread and short-term evolution in minute detail. We will here review the very recent history of these two technologies, sketch their usefulness in the elucidation of the spread and epidemiology of mostly hospital-acquired infections and discuss future developments.

Comparative Study of Novel Fluorescent Cyanine Nucleotides: Hybridization Analysis of Labeled PCR Products Using a Biochip

This study investigated the synthesis and substrate properties of Cy5-labeled dUTP derivatives with different substituents, linkers between the dye unit and pyrimidine heterocycle and fluorophore charges. Fluorescently labeled nucleoside triphosphates were studied as substrates using multiplex PCR with Taq and Vent (exo-) DNA polymerases, the typical representatives of the A and B polymerase families. The efficiency of nucleotide incorporation during PCR was assessed with a multi-parameter hybridization analysis using a diagnostic DNA microarray. The hybridization analysis indirectly estimates the incorporation efficiency of dye-labeled nucleotides in multiplex PCR. Our results demonstrated higher efficiencies of substrates with electrically neutral dyes than electropositive and electronegative Cy5 residues.

Proteome analysis of the Mycobacterium tuberculosis Beijing B0/W148 cluster

Beijing B0/W148, a "successful" clone of Mycobacterium tuberculosis, is widespread in the Russian Federation and some countries of the former Soviet Union. Here, we used label-free gel-LC-MS/MS shotgun proteomics to discover features of Beijing B0/W148 strains that could explain their success. Qualitative and quantitative proteome analyses of Beijing B0/W148 strains allowed us to identify 1,868 proteins, including 266 that were differentially abundant compared with the control strain H37Rv. To predict the biological effects of the observed differences in protein abundances, we performed Gene Ontology analysis together with analysis of protein-DNA interactions using a gene regulatory network. Our results demonstrate that Beijing B0/W148 strains have increased levels of enzymes responsible for long-chain fatty acid biosynthesis, along with a coincident decrease in the abundance of proteins responsible for their degradation. Together with high levels of HsaA (Rv3570c) protein, involved in steroid degradation, these findings provide a possible explanation for the increased transmissibility of Beijing B0/W148 strains and their survival in host macrophages. Among other, we confirmed a very low level of the SseA (Rv3283) protein in Beijing B0/W148 characteristic for all «modern» Beijing strains, which could lead to increased DNA oxidative damage, accumulation of mutations, and potentially facilitate the development of drug resistance.

Spoligotyping of Mycobacterium tuberculosis Complex Isolates by Use of Ligation-Based Amplification and Melting Curve Analysis

We report here a ligation-based spoligotyping that can identify unamplified spacers in membrane-based spoligotyping due to asymmetric insertion of IS6110 in the direct repeat locus. Our typing yielded 84.4% (411/487) concordance with traditional typing and 100% (487/487) accuracy when confirmed by DNA sequencing.

SpoTyping: fast and accurate in silico Mycobacterium spoligotyping from sequence reads

SpoTyping is a fast and accurate program for in silico spoligotyping of Mycobacterium tuberculosis isolates from next-generation sequencing reads. This novel method achieves high accuracy for reads of both uniform and varying lengths, and is about 20 to 40 times faster than SpolPred. SpoTyping also integrates the function of producing a report summarizing associated epidemiological data from a global database of all isolates having the same spoligotype. SpoTyping is freely available at: https://github.com/xiaeryu/SpoTyping-v2.0.

A strip array for spoligotyping of Mycobacterium tuberculosis complex isolates

A novel strip array was developed for a nine-spacer spoligotyping scheme of Mycobacterium tuberculosis complex (MTBC). The new method was evaluated using 211 MTBC isolates and the results were fully concordant with the traditional spoligotyping approach. The strip array proved to be rapid and convenient for spoligotyping of MTBC.

Evaluation of a low-density hydrogel microarray technique for mycobacterial species identification

In addition to the obligatory pathogenic species of the Mycobacterium tuberculosis complex and Mycobacterium leprae, the genus Mycobacterium also includes conditionally pathogenic species that in rare cases can lead to the development of nontuberculous mycobacterial diseases. Because tuberculosis and mycobacteriosis have similar clinical signs, the accurate identification of the causative agent in a clinical microbiology laboratory is important for diagnostic verification and appropriate treatment. This report describes a low-density hydrogel-based microarray containing oligonucleotide probes based on the species-specific sequences of the gyrB gene fragment for mycobacterial species identification. The procedure included the amplification of a 352-nucleotide fragment of the gene and its hybridization on a microarray. The triple-species-specific probe design and the algorithm for hybridization profile recognition based on the calculation of Pearson correlation coefficients, followed by the construction of a profile database, allowed for the reliable and accurate identification of mycobacterial species, including mixed-DNA samples. The assay was used to evaluate 543 clinical isolates from two regions of Russia, demonstrating its ability to detect 35 mycobacterial species, with 99.8% sensitivity and 100% specificity when using gyrB, 16S, and internal transcribed spacer (ITS) fragment sequencing as the standard. The testing of clinical samples showed that the sensitivity of the assay was 89% to 95% for smear-positive samples and 36% for smear-negative samples. The large number of identified species, the high level of sensitivity, the ability to detect mycobacteria in clinical samples, and the up-to-date profile database make the assay suitable for use in routine laboratory practice.