Synergistic effects of nano-ZnO/multi-walled carbon nanotubes/chitosan nanocomposite membrane for the sensitive detection of sequence-specific of PAT gene and PCR amplification of NOS gene

Facile fabrication of ternary MWCNTs/ZnO/Chitosan nanocomposite for enhanced photocatalytic degradation of methylene blue and antibacterial activity

Developing a cheap, stable and effective photocatalyst is necessary for remediation of persistent organic pollutants. To address this challenge, we proposed a unique interfacial engineering technique and proper bandgap matching strategy to synthesize MWCNTs/ZnO/Chitosan ternary nanocomposite for effective photocatalytic application. The features of the prepared samples were determined by FESEM, TEM, EDX, elemental mapping, AFM, FT-IR, XRD, UV–Vis spectroscopy and BET surface analysis. The obtained results showed successful fabrication of synthesized nanocomposites with enhanced surface area. Degradation effect of nanostructures on methylene blue (MB) and antibacterial activity against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus) and Bacillus subtilis (B. subtilis) pathogenic strains were investigated. The proposed photocatalytic mechanism illustrated the electron transfer facilitated by MWCNTs/ZnO/Chitosan structure which results in spatial separation of electron–hole pairs. Compared with ZnO and ZnO/Chitosan, the prepared MWCNTs/ZnO/Chitosan ternary nanocomposite showed high usage of UV illumination and superior separation of photogenerated electron–hole pairs. MWCNTs/ZnO/Chitosan illustrated 86.26% adsorption rate and outstanding increased photocatalytic activity on MB degradation efficiency of 98.76% after 20 min. Stability of photocatalyst reached from 98.76% initial decolorization to 85% at the fourth cycle. In addition, the ternary nanocomposite also exhibited remarkable bactericidal activity against gram-positive (S. aureus) and (B. subtilis) and gram-negative (E. coli) bacteria strains. Due to the obtained results, the prepared nanocomposite would be an efficient candidate photocatalyst with antibacterial properties.

Study of ZnO-CNT Nanocomposites in High-Pressure Conditions

Recently, carbon nanotubes (CNTs) have been used extensively to develop new materials and devices due to their specific morphology and properties. The reinforcement of different metal oxides such as zinc oxide (ZnO) with CNT develops advanced multifunctional materials with improved properties. Our aim is to obtain ZnO-CNT nanocomposites by in situ hydrothermal method in high-pressure conditions. Various compositions were tested. The structure and morphology of ZnO-CNT nanocomposites were analyzed by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry—thermogravimetry (DSC-TG), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM). These analyses showed the formation of complex ZnO-CNT structures. FT-IR spectra suggest possible interactions between CNT and ZnO. DSC-TG analysis also reveals the formation of some physical bonds between ZnO and CNT, through the appearance of endothermic peaks which could be assigned to the decomposition of functional groups of the CNT chain and breaking of the ZnO-CNT bonds. XRD characterization demonstrated the existence of ZnO nanocrystallites with size around 60 nm. The best ZnO:CNT composition was further selected for preliminary investigations of the potential of these nanocomposite powders to be processed as pastes for extrusion-based 3D printing.

Electrochemical impedimetric DNA sensing based on multi-walled carbon nanotubes-SnO2-chitosan nanocomposite

A sensitive electrochemical impedimetric DNA biosensor based on the integration of tin oxide (SnO2) nanoparticles, chitosan (CHIT) and multi-walled carbon nanotubes (MWNTs) is presented in this paper. The MWNTs-SnO2-CHIT composite modified gold electrode was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Compared with individual MWNTs-CHIT, SnO2-CHIT and bare gold electrode, this composite showed the most obvious electrochemical signal of the redox probe [Fe(CN)6](3-/4-). According to the change of the electron transfer resistance (R(et)) induced by the hybridization, target DNA was successfully detected via EIS. This DNA electrochemical biosensor was applied to detect phosphinothricin acetyltransferase (PAT) gene in transgenic corn. The synergistic effect of the MWNTs-SnO2-CHIT remarkably enhanced DNA immobilization and hybridization detection. The dynamic detection range was from 1.0×10(-11) mol/L to 1.0×10(-6) mol/L with a detection limit of 2.5×10(-12) mol/L. This sensing platform showed inner advantage, such as simplicity, good stability, and high sensitivity.

Recent advances in ZnO nanostructures and thin films for biosensor applications: review

Biosensors have shown great potential for health care and environmental monitoring. The performance of biosensors depends on their components, among which the matrix material, i.e., the layer between the recognition layer of biomolecule and transducer, plays a crucial role in defining the stability, sensitivity and shelf-life of a biosensor. Recently, zinc oxide (ZnO) nanostructures and thin films have attracted much interest as materials for biosensors due to their biocompatibility, chemical stability, high isoelectric point, electrochemical activity, high electron mobility, ease of synthesis by diverse methods and high surface-to-volume ratio. ZnO nanostructures have shown the binding of biomolecules in desired orientations with improved conformation and high biological activity, resulting in enhanced sensing characteristics. Furthermore, compatibility with complementary metal oxide semiconductor technology for constructing integrated circuits makes ZnO nanostructures suitable candidate for future small integrated biosensor devices. This review highlights recent advances in various approaches towards synthesis of ZnO nanostructures and thin films and their applications in biosensor technology.

Review: Carbon nanotube based electrochemical sensors for biomolecules

Carbon nanotubes (CNTs) have been incorporated in electrochemical sensors to decrease overpotential and improve sensitivity. In this review, we focus on recent literature that describes how CNT-based electrochemical sensors are being developed to detect neurotransmitters, proteins, small molecules such as glucose, and DNA. Different types of electrochemical methods are used in these sensors including direct electrochemical detection with amperometry or voltammetry, indirect detection of an oxidation product using enzyme sensors, and detection of conductivity changes using CNT-field effect transistors (FETs). Future challenges for the field include miniaturizing sensors, developing methods to use only a specific nanotube allotrope, and simplifying manufacturing.

Nanomaterial-assisted signal enhancement of hybridization for DNA biosensors: a review

Detection of DNA sequences has received broad attention due to its potential applications in a variety of fields. As sensitivity of DNA biosensors is determined by signal variation of hybridization events, the signal enhancement is of great significance for improving the sensitivity in DNA detection, which still remains a great challenge. Nanomaterials, which possess some unique chemical and physical properties caused by nanoscale effects, provide a new opportunity for developing novel nanomaterial-based signal-enhancers for DNA biosensors. In this review, recent progress concerning this field, including some newly-developed signal enhancement approaches using quantum-dots, carbon nanotubes and their composites reported by our group and other researchers are comprehensively summarized. Reports on signal enhancement of DNA biosensors by non-nanomaterials, such as enzymes and polymer reagents, are also reviewed for comparison. Furthermore, the prospects for developing DNA biosensors using nanomaterials as signal-enhancers in future are also indicated.

Electrochemical techniques on sequence-specific PCR amplicon detection for point-of-care applications

Nucleic acid based analysis provides accurate differentiation among closely affiliated species and this species- and sequence-specific detection technique would be particularly useful for point-of-care (POC) testing for prevention and early detection of highly infectious and damaging diseases. Electrochemical (EC) detection and polymerase chain reaction (PCR) are two indispensable steps, in our view, in a nucleic acid based point-of-care testing device as the former, in comparison with the fluorescence counterpart, provides inherent advantages of detection sensitivity, device miniaturization and operation simplicity, and the latter offers an effective way to boost the amount of targets to a detectable quantity. In this mini-review, we will highlight some of the interesting investigations using the combined EC detection and PCR amplification approaches for end-point detection and real-time monitoring. The promise of current approaches and the direction for future investigations will be discussed. It would be our view that the synergistic effect of the combined EC-PCR steps in a portable device provides a promising detection technology platform that will be ready for point-of-care applications in the near future.

Recent advances in nanotechnology applied to biosensors

In recent years there has been great progress the application of nanomaterials in biosensors. The importance of these to the fundamental development of biosensors has been recognized. In particular, nanomaterials such as gold nanoparticles, carbon nanotubes, magnetic nanoparticles and quantum dots have been being actively investigated for their applications in biosensors, which have become a new interdisciplinary frontier between biological detection and material science. Here we review some of the main advances in this field over the past few years, explore the application prospects, and discuss the issues, approaches, and challenges, with the aim of stimulating a broader interest in developing nanomaterial-based biosensors and improving their applications in disease diagnosis and food safety examination.

An Electrochemical DNA Biosensor Developed on a Nanocomposite Platform of Gold and Poly(propyleneimine) Dendrimer

An electrochemical DNA nanobiosensor was prepared by immobilization of a 20mer thiolated probe DNA on electro-deposited generation 4 (G4) poly(propyleneimine) dendrimer (PPI) doped with gold nanoparticles (AuNP) as platform, on a glassy carbon electrode (GCE). Field emission scanning electron microscopy results confirmed the co-deposition of PPI (which was linked to the carbon electrode surface by C-N covalent bonds) and AuNP ca 60 nm. Voltammetric interrogations showed that the platform (GCE/PPI-AuNP) was conducting and exhibited reversible electrochemistry (E°′ = 235 mV) in pH 7.2 phosphate buffer saline solution (PBS) due to the PPI component. The redox chemistry of PPI was pH dependent and involves a two electron, one proton process, as interpreted from a 28 mV/pH value obtained from pH studies. The charge transfer resistance (R_ct) from the electrochemical impedance spectroscopy (EIS) profiles of GCE/PPI-AuNP monitored with ferro/ferricyanide (Fe(CN)₆^3-/4-) redox probe, decreased by 81% compared to bare GCE. The conductivity (in PBS) and reduced R_ct (in Fe(CN)₆^3-/4-) values confirmed PPI-AuNP as a suitable electron transfer mediator platform for voltammetric and impedimetric DNA biosensor. The DNA probe was effectively wired onto the GCE/PPI-AuNP via Au-S linkage and electrostatic interactions. The nanobiosensor responses to target DNA which gave a dynamic linear range of 0.01 - 5 nM in PBS was based on the changes in R_ct values using Fe(CN)₆^3-/4- redox probe.