Recovery of fumaric acid from fermentation broth using bipolar electrodialysis

Janus membranes at the water-energy nexus: A critical review

Membrane technology has emerged as a highly efficient strategy for alleviating water and energy scarcity globally. As the key component, the membrane plays a fatal role in different membrane systems; however, traditional membranes still suffer from shortcomings including low permeability, low selectivity, and high fouling tendency. Janus membranes are promising to overcome those shortcomings and appealing for applications in the realm of water-energy nexus, due to their special transport behaviors and separation properties as a result of their unique asymmetric wetting or surface charge properties. Recently, numerous research studies have been conducted on the design, fabrication, and application of Janus membranes. In this review, we aim to provide a state-of-the-art summary and a critical discussion on the research advances of Janus membranes at the water-energy nexus. The innovative design strategies of different types of Janus membranes are summarized and elucidated in detail. The fundamental working principles of various Janus membranes and their applications in oil/water separation, membrane distillation, solar evaporation, electrodialysis, nanofiltration, and forward osmosis are discussed systematically. The mechanisms of directional transport properties, switchable permeability, and superior separation properties of Janus membranes in those different applications are elucidated. Lastly, future research directions and challenges are highlighted in improving Janus membrane performance for various membrane systems.

Electrodialysis Desalination with Simultaneous pH Adjustment Using Bilayer and Bipolar Membranes, Modeling and Experiment

A kinetic model of the bipolar electrodialysis process with a two-chamber unit cell formed by a bilayer (bipolar or asymmetric bipolar) and cation-exchange membrane is proposed. The model allows describing various processes: pH adjustment of strong electrolyte solutions, the conversion of a salt of a weak acid, pH adjustment of a mixture of strong and weak electrolytes. The model considers the non-ideal selectivity of the bilayer membrane, as well as the competitive transfer of cations (hydrogen and sodium ions) through the cation-exchange membrane. Analytical expressions are obtained that describe the kinetic dependences of pH and concentration of ionic components in the desalination (acidification) compartment for various cases. Comparison of experimental data with calculations results show a good qualitative and, in some cases, quantitative agreement between experimental and calculated data. The model can be used to predict the performance of small bipolar membrane electrodialysis modules designed for pH adjustment processes.

Application of bipolar membrane electrodialysis for simultaneous recovery of high-value acid/alkali from saline wastewater: An in-depth review

With the development of comprehensive utilization of high-salinity wastewater, salt resources regeneration has been considered as the fundamental requirement for process sustainability and economic benefits. As one of the potential candidates, bipolar membrane electrodialysis (BMED) was rapidly developed in recent years for the treatment of saline wastewater. Different from other methods directly obtaining salts or condensed wastewater, BMED could utilize and convert the dissolved waste salt into higher-value acid and alkali simultaneously, which has various advantages including outstanding environmental effects and economic benefits. In this review, the recent applications of BMED for waste salt recovery and high-value acid/alkali generation from saline wastewater were systematically outlined. Based on the summary above, the economy analysis of BMED was further reviewed from the roles of desalination and resources recovery. In addition, the BMED-based processes integrated with in-situ utilization of the generated acid/alkali resources were discussed. Furthermore, the influence of operating factors on BMED performance were outlined. Finally, the strategies for improving BMED performance were concluded. Furthermore, the future application and prospects of BMED was presented. This work would provide guidance for the applications of bipolar membrane electrodialysis in saline wastewater treatment and the high-value conversion of salt resources into acids and alkalis.

Simultaneous Fractionation, Desalination, and Dye Removal of Dye/Salt Mixtures by Carbon Cloth-Modified Flow-electrode Capacitive Deionization

The critical challenges of using electromembrane processes [e.g., electrodialysis and flow-electrode capacitive deionization (FCDI)] to recycle resources (e.g., water, salts, and organic compounds) from wastewater are the fractionation of dissolved ionic matter, the removal/recovery of organic components during desalination, and membrane antifouling. This study realized the simultaneous fractionation, desalination, and dye removal/recovery (FDR) treatment of dye/salt mixtures through a simple but effective approach, that is, using a carbon cloth-modified FCDI (CC-FCDI) unit, in which the carbon cloth layer was attached to the surface of each ion-exchange membrane (IEM). The IEMs and carbon-based flow-electrodes were responsible for the fractionation and desalination of dye and salt ions, while the carbon cloth layers contributed to the active membrane antifouling and dye removal/recovery by the electrosorption mechanism. Attributed to such features, the CC-FCDI unit accomplished the effective FDR treatment of dye/salt mixtures with wide ranges of salt and dye concentrations (5-20 g L^-1 NaCl and 200-800 ppm methylene blue) and different dye components (cationic and anionic dyes) under various applied voltages (1.2-3.2 V). Moreover, the active membrane antifouling by virtue of the carbon cloth facilitated the excellent and sustainable FDR performance of CC-FCDI. The removal/recovery of dyes from the carbon cloth strongly depends on the characteristics of dye molecules, the surface properties of the carbon cloth, and the local pH at the IEM/CC interfaces. This study sheds light on the strategies of using multifunctional layer-modified FCDI units to reclaim resources from various high-salinity organic wastewater.

Investigation of ion-exchange membranes by means of chronopotentiometry: A comprehensive review on this highly informative and multipurpose technique

Electrodialysis is mostly used for drinking water production but it has gained applicability in different new fields in recent decades. Membrane characteristics and ion transport properties strongly influence the efficiency of electrodialysis and must be evaluated to avoid an intense energy consumption and ensure long membrane times of usage. To this aim, conducting studies on ion transport across membranes is essential. Several dynamic characterization methods can be employed, among which, chronopotentiometry has shown special relevance because it allows a direct access to the contribution of the potential in different states of the membrane/solution system. The present paper provides a critical review on the use of chronopotentiometry to determine the main membrane transport properties and to evaluate mass transfer phenomena. Properties, such as limiting current density, electrical resistances, plateau length, transport number of counter-ions in the membrane, transition times, and apparent fraction of membrane conductive area have been intensively discussed in the literature and are presented in this review. Some of the phenomena evaluated using this technique are concentration polarization, gravitational convection, electroconvection, water dissociation, and fouling/scaling, all of them also shown herein. Mathematical and experimental studies were considered. New trends in chronopotentiometric studies should include ion-exchange membranes that have been recently developed (presenting anti-fouling, anti-microbial, and monovalent-selective properties) and a deeper discussion on the behaviour of complex solutions that have been often treated by electrodialysis, such as municipal wastewaters. New mathematical models, especially 3D ones, are also expected to be developed in the coming years.

Low-waste fermentation-derived organic acid production by bipolar membrane electrodialysis—an overview

Organic acids, e.g, citric acid, fumaric acid, lactic acid, malic acid, pyruvic acid and succinic acid, have important role in the food industry and are potential raw materials for the sustainable chemical industry. Their fermentative production based on renewable raw materials requires innovatively designed downstream processing to maintain low environmental impact and resource efficiency throughout the production process. The application of bipolar membranes offers clean and effective way to generate hydrogen ions required for free acid production from its salt. The water dissociation reaction inside the bipolar membrane triggered by electric field plays key role in providing hydrogen ion for the replacement of the cations in organic acid salts. Combined with monopolar ion-exchange membranes in a bipolar membrane electrodialysis process, material flow can be separated beside the product stream into additional reusable streams, thus minimizing the waste generation. This paper focuses on bipolar membrane electrodialysis applied for organic acid recovery from fermentation broth.

Effect of pH on Total Volume Membrane Charge Density in the Nanofiltration of Aqueous Solutions of Nitrate Salts of Heavy Metals

The separation efficiencies of aqueous solutions containing nitric salts of Zn, Cu, Fe or Pb at various pH in process of nanofiltration have been investigated experimentally. These results were used to obtain the total volume membrane charge densities, through mathematical modelling based on the Donnan-Steric partitioning Model. The experimentally obtained retention values of individual heavy metal ions varied between 36% (Zn2+ at pH = 2), 57% (Pb2+ at pH = 2), 80% (Fe3+ at pH = 9), and up to 97% (Cu2+ at pH = 9). The mathematical modelling allowed for fitting the total volume membrane charge density (Xd), which yielded values ranging from -451.90 to +900.16 mol/m3 for different non-symmetric ions. This study presents the application of nanofiltration (NF) modelling, including a consideration of each ion present in the NF system-even those originating from solutions used to adjust the pH values of the feed.

Electro-membrane processes for organic acid recovery

With an increase in the organic acid requirement, the production of organic acids has been increased over the years. To achieve cost-effective production of organic acids, efficient recovery processes are needed. Electro-membrane processes, including electrodialysis (ED), electrometathesis (EMT), electro-ion substitution (EIS), electro-electrodialysis (EED), electrodialysis with bipolar membrane (EDBM), and electrodeionization (EDI), are promising technologies for the recovery of organic acids. In the electro-membrane processes, organic acids are separated from water and other impurities based on the electro-migration of ions through ion-exchange membranes. These processes can recover various types of organic acids from the fermentation broth with high recovery yield and low energy consumption. In addition, the integration of fermentation and the electro-membrane process can improve the acid recovery with lower byproduct concentration and energy consumption.

With an increase in the organic acid requirement, the publication of organic acids recovery has been increased over the years.

Waste biorefinery in arid/semi-arid regions

The utilization of waste biorefineries in arid/semi-arid regions is advisable due to the reduced sustainable resources in arid/semi-arid regions, e.g. fresh water and biomass. This review focuses on biomass residues available in arid/semi-arid regions, palm trees residues, seawater biomass based residues (coastal arid/semi-arid regions), and the organic fraction of municipal solid waste. The present review aims to describe and discuss the availability of these waste biomasses, their conversion to value chemicals by waste biorefinery processes. For the case of seawater biomass based residues it was reviewed and advise the use of seawater in the biorefinery processes, in order to decrease the use of fresh water.

Ion-exchange membranes in chemical synthesis – a review

The applicability of ion-exchange membranes (IEMs) in chemical synthesis was discussed based on the existing literature. At first, a brief description of properties and structures of commercially available ion-exchange membranes was provided. Then, the IEM-based synthesis methods reported in the literature were summarized, and areas of their application were discussed. The methods in question, namely: membrane electrolysis, electro-electrodialysis, electrodialysis metathesis, ion-substitution electrodialysis and electrodialysis with bipolar membrane, were found to be applicable for a number of organic and inorganic syntheses and acid/base production or recovery processes, which can be conducted in aqueous and non-aqueous solvents. The number and the quality of the scientific reports found indicate a great potential for IEMs in chemical synthesis.