Metal–organic framework-based porous matrix membranes for improving mass transfer in forward osmosis membranes

Thiol-Functionalized Covalent Organic Framework for Efficient Metal Ion Removal in Water Treatment

Advanced water treatment technologies must offer selective, efficient, and cost-effective contaminant removal. In this study, TPB-DMTP-COF-SH, prepared from 1,3,5-tris(4-aminophenyl)benzene (TPB) and 2,5-dimethoxyterephaldehyde (DMTP), was synthesized via a two-step method and applied for the adsorption of aluminum (Al3+), iron (Fe2+), and manganese (Mn2+) ions from water. Adsorption performance was influenced by pH, initial concentration, and contact time, with optimal pH values of 3 for Al3+, 8 for Fe2+, and 10 for Mn2+. The adsorption data followed the Langmuir isotherm model, yielding maximum capacities of 3.27 mg g-1 (Al3+), 8.5 mg g-1 (Fe2+), and 0.67 mg g-1 (Mn2+). Kinetic studies indicated a pseudo-second-order mechanism, suggesting chemisorption as the dominant process. Equilibrium adsorption was reached at 15 min for Al3+ and Mn2+ and 20 min for Fe2+. As a proof of concept, we demonstrate that this thiol-functionalized COF not only effectively removes metals but also offers enhanced processability into composite beads and membranes, making it a strong candidate for real-world water treatment applications. These findings highlight TPB-DMTP-COF-SH as a promising and scalable solution for water purification.

Recent advances in surface tailoring of thin film forward osmosis membranes: A review

The recent advancements in fabricating forward osmosis (FO) membranes have shown promising results in desalination and water treatment. Different methods have been applied to improve FO performance, such as using mixed or new draw solutions, enhancing the recovery of draw solutions, membrane modification, and developing FO-hybrid systems. However, reliable methods to address the current issues, including reverse salt flux, fouling, and antibacterial activities, are still in progress. In recent decades, surface modification has been applied to different membrane processes, including FO membranes. Introducing nanochannels, bioparticles, new monomers, and hydrophilic-based materials to the surface layer of FO membranes has significantly impacted their performance and efficiency and resulted in better control over fouling and concentration polarization (CP) in these membranes. This review critically investigates the recent developments in FO membrane processes and fabrication techniques for FO surface-layer modification. In addition, this study focuses on the latest materials and structures used for the surface modification of FO membranes. Finally, the current challenges, gaps, and suggestions for future studies in this field have been discussed in detail.

A Comprehensive Review of Performance of Polyacrylonitrile-Based Membranes for Forward Osmosis Water Separation and Purification Process

Polyacrylonitrile (PAN), with its unique chemical, electrical, mechanical, and thermal properties, has become a crucial acrylic polymer for the industry. This polymer has been widely used to fabricate ultrafiltration, nanofiltration, and reverse osmosis membranes for water treatment applications. However, it recently started to be used to fabricate thin-film composite (TFC) and fiber-based forward osmosis (FO) membranes at a lab scale. Phase inversion and electrospinning methods were the most utilized techniques to fabricate PAN-based FO membranes. The PAN substrate layer could function as a good support layer to create TFC and fiber membranes with excellent performance under FO process conditions by selecting the proper modification techniques. The various modification techniques used to enhance PAN-based FO performance include interfacial polymerization, layer-by-layer assembly, simple coating, and incorporating nanofillers. Thus, the fabrication and modification techniques of PAN-based porous FO membranes have been highlighted in this work. Also, the performance of these FO membranes was investigated. Finally, perspectives and potential directions for further study on PAN-based FO membranes are presented in light of the developments in this area. This review is expected to aid the scientific community in creating novel effective porous FO polymeric membranes based on PAN polymer for various water and wastewater treatment applications.

[Advances in enrichment and separation of cis-diol-containing compounds by porous organic frameworks]

The design and synthesis of boronate affinity materials that show high efficiency, high selectivity, and high enrichment performance have gained significant attention. The principle of boronate affinity relies on the reversible covalent reactions, including the formation of stable five-membered or six-membered cyclic esters with cis-diol-containing compounds in alkaline aqueous media and dissociation of cyclic esters in an acidic surrounding to release cis-diol-containing compounds. Recently, various boronate affinity materials have been synthesized and utilized for selective enrichment of these compounds. Metal organic frameworks (MOFs) and covalent organic frameworks (COFs) have been widely used in chromatographic separation and sample pretreatment because of their adjustable pore size, high porosity, high specific surface area, tunable skeleton structure, and favorable chemical and thermal stability. To promote the enrichment selectivity of MOFs and COFs for cis-diol-containing compounds, boronic acid-functionalized MOFs and COFs with various structures and categories have been synthesized. This review summarizes more than 80 investigations into the categories, synthetic strategies, and applications of boronic acid-functionalized MOFs and COFs from the Science Citation Index. These synthesis methods include metal ligand-fragment co-assembly, post-synthetic modification, and bottom-up modification of boronic acid-functionalized porous materials. Although two modification strategies (post-synthetic and metal ligand-fragment co-assembly) have been introduced for the preparation of boronic acid-functionalized MOFs, the latter is more commonly adopted as it improves the enrichment selectivity and enrichment efficiency of MOFs. The common limitations of MOFs such as aggregation and aperture issues were also resolved. Boron affinity MOFs possessing favorable properties according to the characteristics of cis-diol-containing compounds, have also been synthesized. Furthermore, to facilitate enrichment and separation, many boronic acid-functionalized magnetic material MOFs have been developed for the enrichment and analysis of cis-diol-containing compounds. Additionally, the luminescent properties of Ln-MOFs have been used in combination with boronic acid affinity for the enrichment, separation, and subsequent detection of cis-diol-containing compounds. Post-synthetic modification and the bottom-up strategy are the primary methods for the preparation of boronic acid-functionalized COFs. Boronic acid-functionalized COFs are less investigated than boronic acid-functionalized MOFs, likely due to the greater complexity of COF synthesis. This work aims to summarize the research advances, synthesis ideas, and synthesis methods related to boric acid-functionalized porous organic frameworks, which will provide theoretical guidance and technical support for its applications while accelerating the commercialization of such organic frameworks.

Emerging advances and current applications of nanoMOF-based membranes for water treatment

Metal-organic frameworks (MOFs) are significantly tunable materials that can be exploited in a wide range of applications. In recent years, a large number of studies have been focused on synthesizing nano-scale MOFs (nanoMOFs), thus taking advantage of these unique materials in various applications, especially those that are only possible at nano-scale. One of the technologies where nanoMOF materials occupy a central role is the membrane technology as one of the most efficient separation techniques. Therefore, numerous reports can be found on the enhancement of the physicochemical properties of polymeric membranes by using nanoMOFs, leading to remarkably improved performance. One of the most considerable applications of these nanoMOF-based membranes is in water treatment systems, because freshwater scarcity is now an undeniable crisis facing humanity. In this in-depth review, the most prominent synthesis and post-synthesis methods for the fabrication of nanoMOFs are initially discussed. Afterwards, different nanoMOF-based composite membranes such as thin-film nanocomposites (TFN) and mixed-matrix membranes (MMM) and their various fabrication methods are reviewed and compared. Then, the impacts of using MOFs-based membranes for water purification through growing metal-organic frameworks crystals on the support materials and utilization of metal-organic frameworks as fillers in mixed matrix membrane (MMM) are highlighted. Finally, a summary of pros and cons of using nanoMOFs in membrane technology for water treatment purposes and clear future prospects and research potentials are presented.

Ionic Liquid-Based Colloidal Formulations for the Synthesis of Nano-MOFs: Applications in Gas Adsorption and Water Desalination

Microemulsions (MEs) comprising choline dioctylsulfosuccinate [Cho][AOT], a biobased ionic liquid (IL) surfactant as an emulsifier, (R)-(+)-limonene (RL) as a nonpolar phase, and ethylene glycol (EG)/ethanolammonium formate (EOAF) as an organic solvent/low-viscosity IL polar component were constructed. Spontaneous aggregation of [Cho][AOT] was observed with a negative ΔH form using isothermal titration calorimetry. The aggregates of [Cho][AOT] in RL showed a critical micellar concentration (cmc) of ∼5.49 mM, EG (cmc ∼3.99 mM), and EOAF (cmc ∼1.56 mM), and these are further characterized by various techniques. These novel IL-based MEs have been used as nanoreactors for the sustainable synthesis of uniform nanosized metal-organic frameworks (N-MOFs), such as MIL-53(Al), HKUST-1, UIO-66-NH₂, and ZIF-8, with a precise control over size and morphology at room temperature. Characterization of N-MOFs has been performed using scanning electron microscopy, powder X-ray diffraction, and Fourier transform infrared spectroscopy. The synthesized N-MOFs have been used to prepare stable and uniform thin film nanocomposite nanofiltration membranes, suitable for desalination of brackish water with excellent flux (31.8 LMH/bar) and rejection (99.0%) of divalent salts.

Chiral Nanochannels of Ordered Mesoporous Silica Constructed by a Pillar[5]arene-Based Host-Guest System

The separation of racemic compounds by chiral nanochannels has attracted extensive attention. However, the fabrication of high-performance chiral nanochannels is still a challenge owing to the difficulty in magnifying the weak chiral interaction to macroscopic properties of materials. Herein, by introducing a l-alanine-pillar[5]arene host to achiral ordered mesoporous silica (OMS), chiral OMS nanochannels were fabricated, which exhibited excellent selectivity (ee value up to 90.2%) to separate racemic drugs with promising reusability and stability. Besides, it was identified that enantioselective separation took place through a molecular-recognition-adsorbed transport mechanism. This work highlights the great potential of chiral OMS nanochannels as a platform for enantioselective separation.

Modification Approaches to Enhance Dehydration Properties of Sodium Alginate-Based Pervaporation Membranes

Transport characteristics of sodium alginate (SA) membranes cross-linked with CaCl₂ and modified with fullerenol and fullerene derivative with L-arginine for pervaporation dehydration were improved applying various approaches, including the selection of a porous substrate for the creation of a thin selective SA-based layer, and the deposition of nano-sized polyelectrolyte (PEL) layers through the use of a layer-by-layer (Lbl) method. The impacts of commercial porous substrates made of polyacrylonitrile (PAN), regenerated cellulose, and aromatic polysulfone amide were investigated by scanning electron microscopy (SEM), atomic force microscopy (AFM), standard porosimetry method, and water filtration. The effects of PEL combinations (such as poly(sodium 4-styrene sulfonate) (PSS)/SA, PSS/chitosan, PSS/polyacrylic acid, PSS/poly(allylamine hydrochloride)) and the number of PEL bilayers deposited with the Lbl technique on the properties of the SA and SA/fullerene derivative membranes were studied by SEM, AFM, and contact angle measurements. The best characteristics were exhibited by a cross-linked PAN-supported SA/fullerenol (5%) membrane with five PSS/SA bilayers: permeation flux of 0.68–1.38 kg/(m²h), 0.18–1.55 kg/(m²h), and 0.50–1.15 kg/(m²h), and over 99.7, 99.0, and 89.0 wt.% water in the permeate for the pervaporation dehydration of isopropanol (12–70 wt.% water), ethanol (4–70 wt.% water), and tetrahydrofuran (5.7–70 wt.% water), respectively. It was demonstrated that the mutual application of bulk and surface modifications essentially improved the membrane’s characteristics in pervaporation dehydration.

Copper-Modified Polymeric Membranes for Water Treatment: A Comprehensive Review

In the last decades, the incorporation of copper in polymeric membranes for water treatment has received greater attention, as an innovative potential solution against biofouling formation on membranes, as well as, by its ability to improve other relevant membrane properties. Copper has attractive characteristics: excellent antimicrobial activity, high natural abundance, low cost and the existence of multiple cost-effective synthesis routes for obtaining copper-based materials with tunable characteristics, which favor their incorporation into polymeric membranes. This study presents a comprehensive analysis of the progress made in the area regarding modified membranes for water treatment when incorporating copper. The notable use of copper materials (metallic and oxide nanoparticles, salts, composites, metal-polymer complexes, coordination polymers) for modifying microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), forward osmosis (FO) and reverse osmosis (RO) membranes have been identified. Antibacterial and anti-fouling effect, hydrophilicity increase, improvements of the water flux, the rejection of compounds capacity and structural membrane parameters and the reduction of concentration polarization phenomena are some outstanding properties that improved. Moreover, the study acknowledges different membrane modification approaches to incorporate copper, such as, the incorporation during the membrane synthesis process (immobilization in polymer and phase inversion) or its surface modification using physical (coating, layer by layer assembly and electrospinning) and chemical (grafting, one-pot chelating, co-deposition and mussel-inspired PDA) surface modification techniques. Thus, the advantages and limitations of these modifications and their methods with insights towards a possible industrial applicability are presented. Furthermore, when copper was incorporated into membrane matrices, the study identified relevant detrimental consequences with potential to be solved, such as formation of defects, pore block, and nanoparticles agglomeration during their fabrication. Among others, the low modification stability, the uncontrolled copper ion releasing or leaching of incorporated copper material are also identified concerns. Thus, this article offers modification strategies that allow an effective copper incorporation on these polymeric membranes and solve these hinders. The article finishes with some claims about scaling up the implementation process, including long-term performance under real conditions, feasibility of production at large scale, and assessment of environmental impact.

A Critical Review on Thin-Film Nanocomposite Membranes with Interlayered Structure: Mechanisms, Recent Developments, and Environmental Applications

The separation properties of polyamide reverse osmosis and nanofiltration membranes, widely applied for desalination and water reuse, are constrained by the permeability-selectivity upper bound. Although thin-film nanocomposite (TFN) membranes incorporating nanomaterials exhibit enhanced water permeance, their rejection is only moderately improved or even impaired due to agglomeration of nanomaterials and formation of defects. A novel type of TFN membranes featuring an interlayer of nanomaterials (TFNi) has emerged in recent years. These novel TFNi membranes show extraordinary improvement in water flux (e.g., up to an order of magnitude enhancement) along with better selectivity. Such enhancements can be achieved by a wide selection of nanomaterials, ranging from nanoparticles, one-/two-dimensional materials, to interfacial coatings. The use of nanostructured interlayers not only improves the formation of polyamide rejection layers but also provides an optimized water transport path, which enables TFNi membranes to potentially overcome the longstanding trade-off between membrane permeability and selectivity. Furthermore, TFNi membranes can potentially enhance the removal of heavy metals and micropollutants, which is critical for many environmental applications. This review critically examines the recent developments of TFNi membranes and discusses the underlying mechanisms and design criteria. Their potential environmental applications are also highlighted.

Composite Material Consisting of HKUST-1 and Indonesian Activated Natural Zeolite and its Application in CO2 Capture

In this study, composite materials consisting in HKUST-1 [Cu3(BTC)2] (BTC: benzene 1, 3, 5-tricarboxylate) and an Indonesian activated natural zeolite (ANZ) from Klaten, Central Java, were successfully prepared and characterized. The purpose of this research was to determine the effect of the combination of these two materials on the characteristics of the composite as well as to determine its CO2 gas adsorption ability. The composite HKUST-1-ANZ (ANZ@HKUST-1) was synthesized in two different techniques, i.e., solvothermal and sonication method. The obtained materials exhibited X-ray diffractogram characteristics of both HKUST-1 and ANZ. Fourier-transform infrared (FTIR) analysis showed a combination of peaks from HKUST-1 and ANZ, i.e. peaks assigned to carboxylate groups and bonds between Cu-O from HKUST-1, as well as N-H bending and SiO from ANZ. The addition of ANZ to HKUST-1 decreased its surface area and nitrogen sorption capacity. Application of the composites as CO2 capture materials shows their CO2 adsorption capacity is increased (ca. 12%) comparing to the initial materials.

Metal Organic Framework Based Polymer Mixed Matrix Membranes: Review on Applications in Water Purification

Polymeric membranes have been widely employed for water purification applications. However, the trade-off issue between the selectivity and permeability has limited its use in various applications. Mixed matrix membranes (MMMs) were introduced to overcome this limitation and to enhance the properties and performance of polymeric membranes by incorporation of fillers such as silica and zeolites. Metal-organic frameworks (MOFs) are a new class of hybrid inorganic-organic materials that are introduced as novel fillers for incorporation in polymeric matrix to form composite membranes for different applications especially water desalination. A major advantage of MOFs over other inorganic fillers is the possibility of preparing different structures with different pore sizes and functionalities, which are designed especially for a targeted application. Different MMMs fabrication techniques have also been investigated to fabricate MMMs with pronounced properties for a specific application. Synthesis techniques include blending, layer-by-layer (LBL), gelatin-assisted seed growth and in situ growth that proved to give the most homogenous dispersion of MOFs within the organic matrix. It was found that the ideal filler loading of MOFs in different polymeric matrices is 10%, increasing the filler loading beyond this value led to formation of aggregates that significantly decreased the MOFs-MMMs performance. Despite the many merits of MOFs-MMMs, the main challenge facing the upscaling and wide commercial application of MOFs-MMMs is the difficult synthesis conditions of the MOFs itself and the stability and sustainability of MOFs-MMMs performance. Investigation of new MOFs and MOFs-MMMs synthesis techniques should be carried out for further industrial applications. Among these new synthesis methods, green MOFs synthesis has been highlighted as low cost, renewable, environmentally friendly and recyclable starting materials for MOFs-MMMs. This paper will focus on the investigation of the effect of different recently introduced MOFs on the performance of MOFs-MMMs in water purification applications.

Development of an HKUST-1 Nanofiller-Templated Poly(ether sulfone) Mixed Matrix Membrane for a Highly Efficient Ultrafiltration Process

Mixed-matrix membranes (MMMs) have been drawing increasing attention due to the high permeability and high rejection capabilities for highly efficient wastewater treatment applications. Nonetheless, improving the water permeance while maintaining the high rejection capability is still an ongoing challenge for the practically state-of-the-art MMMs. Herein, a new class of poly(ether sulfone) (PES) based MMM containing metal-organic framework (MOF) nanofillers of HKUST-1 and blending with poly(methyl methacrylate- co-methacrylic acid) (PMMA- co-MAA) copolymer, designated as HKUST-1@mPES MMM, were developed for the highly efficient ultrafiltration (UF) process. In this study, the nanosized HKUST-1 nanofillers were removed by water dissolution as sacrificial templating materials, so that the additional nanovoids were deliberately generated throughout the dense polymer matrix. The introduction of PMMA- co-MAA copolymer facilitated the even dispersion of HKUST-1 nanofillers in a polymer matrix, by constructing the bridge connection between inorganic nanofillers and organic matrix. The resultant HKUST-1@mPES MMM exhibited a high pure water permeability (PWP) up to 490 L·m^-2·h^-1·bar^-1, substantially reaching nearly 3 times higher than that of the mPES membrane without HKUST-1 nanofillers loading and maintaining a relatively high BSA rejection rate of 96% without obvious deterioration. The newly developed HKUST-1@mPES MMM thereby exhibited a comparable separation efficiency compared to the cutting-edge UF membranes reported so far. Overall, the nanovoid-generated approach provides new insight into developing advanced MMMs used for highly efficient water treatment applications.

Design of a Semi-Continuous Selective Layer Based on Deposition of UiO-66 Nanoparticles for Nanofiltration

Deposition of UiO-66 metal⁻organic framework nanoparticles onto a porous polymer support is a promising approach to designing highly-permeable, size-selective, flexible, and stable membranes for water filtration. In this article, a series of UiO-66 nanoparticles having different particle sizes were synthesized and employed to prepare UiO-66-deposited composite membranes. It was found that the size of the UiO-66 nanoparticles had great influences on the performance of the composite membranes for the filtration of a methylene blue aqueous solution. The deposition of smaller nanoparticles afforded a selective layer having a greater external surface area and narrower interparticle voids. These features made the deposition of smaller nanoparticles more advantageous in terms of the flux and rejection, while the deposition of greater nanoparticles afforded a selective layer more tolerant for fouling. Bimodal composite membranes were prepared by depositing mixed UiO-66 nanoparticles of smaller and bigger sizes. These membranes successfully combined the advantages of nanoparticles of a distinct size.

Thin-Film Nanocomposite (TFN) Membranes Incorporated with Super-Hydrophilic Metal-Organic Framework (MOF) UiO-66: Toward Enhancement of Water Flux and Salt Rejection

Zirconiumv (IV)-carboxylate metal-organic framework (MOF) UiO-66 nanoparticles were successfully synthesized and incorporated in the polyamide (PA) selective layer to fabricate novel thin-film nanocomposite (TFN) membranes. Compared to unmodified pure polyamide thin-film composite (TFC) membranes, the incorporation of UiO-66 nanoparticles significantly changes the membrane morphology and chemistry, leading to an improvement of intrinsic separation properties due to the molecular sieving and superhydrophilic nature of UiO-66 particles. The best performing TFN-U2 (0.1 wt % particle loading) membrane not only shows a 52% increase of water permeability but also maintains salt rejection levels (∼95%) similar to the benchmark. The effects of UiO-66 loading on the forward osmosis (FO) performance were also investigated. Incorporation of 0.1 wt % UiO-66 produced a maximum water flux increase of 40% and 25% over the TFC control under PRO and FO modes, when 1 M NaCl was used as the draw solution against deionized water feed. Meanwhile, solute reverse flux was maintained at a relatively low level. In addition, TFN-U2 membrane displayed a relatively linear increase in FO water flux with increasing NaCl concentration up to 2.0 M, suggesting a slightly reduced internal concentration polarization effect. To our best knowledge, the current study is the first to consider implementation of Zr-MOFs (UiO-66) onto TFN-FO membranes.