Dielectric measurements of fouling of nanofiltration membranes by sparingly soluble salts

A critical review on diverse technologies for advanced wastewater treatment during SARS-CoV-2 pandemic: What do we know?

Advanced wastewater treatment technologies are effective methods and currently attract growing attention, especially in arid and semi-arid areas, for reusing water, reducing water pollution, and explicitly declining, inactivating, or removing SARS-CoV-2. Overall, removing organic matter and micropollutants prior to wastewater reuse is critical, considering that water reclamation can help provide a crop irrigation system and domestic purified water. Advanced wastewater treatment processes are highly recommended for contaminants such as monovalent ions from an abiotic source and SARS-CoV-2 from an abiotic source. This work introduces the fundamental knowledge of various methods in advanced water treatment, including membranes, filtration, Ultraviolet (UV) irradiation, ozonation, chlorination, advanced oxidation processes, activated carbon (AC), and algae. Following that, an analysis of each process for organic matter removal and mitigation or prevention of SARS-CoV-2 contamination is discussed. Next, a comprehensive overview of recent advances and breakthroughs is provided for each technology. Finally, the advantages and disadvantages of each method are discussed.

Scaling Risk Assessment in Nanofiltration of Mine Waters

Nanofiltration can be applied for the treatment of mine waters. One of the main problems is the risk of crystallization of sparingly soluble salts on the membrane surface (scaling). In this work, a series of batch-mode nanofiltration experiments of the mine waters was performed in a dead-end Sterlitech^® HP 4750X Stirred Cell. Based on the laboratory results, the concentration profiles of individual ions along the membrane length in a single-pass industrial-scale nanofiltration (NF) unit was calculated, assuming the tanks-in-series flow model inside the membrane module. These calculations also propose a method for estimating the maximum achievable recovery before the occurrence of the calcium sulfate dihydrate scaling in a single-pass NF 40″ length spiral wound module, simultaneously allowing metastable supersaturation of calcium sulfate dihydrate. The performance of three membrane types (NF270, NFX, NFDL) has been evaluated for the nanofiltration of mine water.

Desalination behavior analysis of interior-modified carbon nanotubes doped membrane by dielectric spectrum and molecular simulation

Carbon nanotube (CNT)-doped polyamide (PA) membranes have attracted much attention in reverse osmosis (RO) membranes due to their significant advantages of water flux and desalination. In this study, we synthesized multi-walled carbon nanotube (MWNT)/PA RO membrane by 12-oxodidodecanoic acid methyl ester group interior-modified MWNTs (MWNT-C₁₄H₂₅O₄). Then, their mechanism of desalination behavior was successfully analyzed by combining dielectric relaxation spectrum (DRS) and molecular dynamics (MD) simulation. DRS analysis mainly focuses on two aspects: (1) the water volume fraction, average pore size and dielectric parameters of MWNT-C₁₄H₂₅O₄/PA and PA membranes were obtained by model analysis of DRS data. These data of MWNT-C₁₄H₂₅O₄/PA membrane are higher than PA membrane, which indicates that the water flux of the MWNT-C₁₄H₂₅O₄/PA membrane was higher than that of the PA membrane. (2) Further analysis shows that the MWNT-C₁₄H₂₅O₄/PA membranes have high average charge density, ion solvation barrier and reflection coefficient, which indicates that the added interior-modified MWNT can improve the salt rejection of PA membranes. In the microscopic aspect, the desalination behavior of the MWNT-C₁₄H₂₅O₄/PA and PA membrane was analyzed from the aspects of free volume distribution, the dynamic diffusion process of water and ions. The results show that the microscopic data of dynamic simulation well support the conclusion of the DRS method. This study provides a convenient methodology to characterize the properties of the membrane from the aspect of membrane structure.

Improving the anti-fouling property and permeate flux of hollow fiber composite nanofiltration membrane using β-cyclodextrin

Hollow fiber composite NF membranes with improved anti-fouling property and water flux were prepared via interfacial polymerizationand layer-by-layer method using polyethylenimine (PEI), isophthaloyl dichloride (IPC), and β-cyclodextrin (β-CD). The chemical structures and the morphologies of the resultant NF membranes were characterized by attenuated total reflectance-fourier transform infrared (ATR-FTIR) spectroscopy and scanning electron microscopy (SEM). The effects of β-CD concentration on membrane morphologies, nanofiltration performances, surface hydrophilicities and anti-fouling properties were investigated. It was found that the permeate flux increased with increasing the β-CD concentration, and no decline of rejection was observed. The results showed that the introduction of β-CD improved surface hydrophilicities and anti-fouling performances of composite hollow fiber NF membranes. The water contact angles decreased from 61.3° to 23° within creasing the concentration of β-CD from 0 to 2.0 wt.%. The resultant hollow fiber composite NF membrane showed an excellent anti-fouling property with the flux recovery ratio of 97.6%, which was much better than that of the original polyamide (PA) NF membranes.