Dehumidification of air using liquid membranes with ionic liquids

On the Moisture Absorption Capability of Ionic Liquids

Due to their many attractive physicochemical properties, ionic liquids (ILs) have received extensive attention with numerous applications proposed in various fields of science and technology. Despite this, the molecular origins of many of their properties, such as the moisture absorption capability, are still not well understood. For insight into this, we systematically synthesized 24 types of ILs by the combination of the dimethyl phosphate anion with various types of alkyl group-substituted cyclic cations─imidazolium, pyrazolium, 1,2,3-triazolium, and 1,2,4-triazolium cations─and performed a detailed analysis of the dehumidification properties of these ILs and their aqueous solutions. It was found that these IL systems have a high dehumidification capability (DC). Among the monocationic ILs, the best performance was obtained with 1-cyclohexylmethyl-4-methyl-1,2,4-triazolium dimethyl phosphate, whose DC (per mol) value is 14 times higher than that of popular solid desiccants like CaCl2 and silica gel. Dicationic ILs, such as 1,1'-(propane-1,3-diyl)bis(4-methyl-1,2,4-triazolium) bis(dimethyl phosphate), showed an even better moisture absorption, with a DC (per mol) value about 20 times higher than that of CaCl2. Small- and wide-angle X-ray scattering measurements of eight types of 1,2,4-triazolium dimethyl phosphate ILs were performed and revealed that the majority of these ILs form nanostructures. Such nanostructures, which vary with the identity of the IL and the water content, fall into three main categories: bicontinuous microemulsions, hexagonal cylinders, and micelle-like structures. Water in the solutions exists primarily in polar regions in the nanostructures; these spaces function as water pockets at relatively low water concentrations. Since the structure and stability of the aggregated forms of the ILs are mainly governed by the interactions of nonpolar groups, the alkyl side chains of the cations play an important role in the DC and temperature-dependent equilibrium water vapor pressure of the IL solutions. Our experimental findings and molecular dynamics simulation results shed light on the moisture absorption mechanism of the IL aqueous solutions from a molecular perspective.

New Insights into the Hygroscopic Character of Ionic Liquids: Study of Fourteen Representatives of Five Cation and Four Anion Families

Over the past three decades, the synthesis of new ionic liquids (ILs) and the expansion of their use in newer applications have grown exponentially. From the beginning of this vertiginous period, it was known that many of them were hygroscopic, which in some cases limited their use or altered the value of their measured physical properties with all the problems that this entails. In an earlier article, we addressed the hygroscopic grade achieved by the ILs 1-ethyl-3-methylimidazolium chloride, 1-ethyl-3-methylimidazolium bromide, 1-ethyl-3-methylimidazolium methyl sulfate, 1-ethyl-3-methylimidazolium ethyl sulfate, 1-ethyl-3-methylpyridinium ethyl sulfate, 1-ethyl-3-methylimidazolium tosylate, 1-ethyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-dodecyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylpyridinium tetrafluoroborate, 1-butyl-1-methylpiperidinium bis(trifluoromethyl sulfonyl)imide, 1-methyl-1-propylpyrrolidinium bis(trifluoromethyl sulfonyl)imide, 1-butyl-1-methylpyrrolidinium bis(trifluoromethyl sulfonyl)imide, and methyl trioctyl ammonium bis(trifluoromethyl sulfonyl)imide. The objective was to determine the influence of the chemical nature of the compounds, exposed surface area, sample volume, agitation, and temperature. For this purpose, we exposed the samples to abrupt increases in relative humidity from 15 to 100% for days in an atmosphere chamber and then proceeded with the reverse process in a gentle manner. The results show that the sorption of water from the atmosphere depends on the nature of the IL, especially the anion, with the chloride anion being of particular importance (chloride ≫ alkyl sulfates~bromide > tosylate ≫ tetrafluoroborate). It has also been proven for the EMIM-ES and EMIM-BF4 samples that the mechanism of moisture capture is both absorption and adsorption, and that the smaller the exposed surface area, the higher the ratio of the mass of water per unit area.

Directional vapor transported and water-proof nanofibrous membranes for liquid desiccant dehumidification systems

The membrane-based liquid desiccant dehumidification system is a newly developed method in the field of air dehumidification. In this study, double-layer nanofibrous membranes (DLNMs) with directional vapor transport and water repellency for liquid dehumidification were fabricated by a simple electrospinning process. Specifically, the combination of thermoplastic polyurethane nanofibrous membrane and polyvinylidene fluoride (PVDF) nanofibrous membrane forms a cone-like structure in DLNMs, resulting in directional vapor transportation. The nanoporous structure and rough surface of PVDF nanofibrous membrane provide waterproof performance for DLNMs. Compare with the commercial membranes, the proposed DLNMs have a significantly higher water vapor permeability coefficient, which is as high as 539.67 g·μm m^-2·24 h·Pa. This study not only provides a new route to construct a directional vapor transport and waterproof membrane, but also demonstrates the huge application prospect of the nanofibrous membrane formed by electrospinning in the field of solution dehumidification.

Constructing rapid water vapor transport channels within mixed matrix membranes based on two-dimensional mesoporous nanosheets

Membrane technology is an effective strategy for gas dehumidification and fuel cell humidification. In this study, cerium fluoride oxide (F-Ce) two-dimensional (2D) mesoporous nanosheets and their composite with 1-ethyl-3-methylimidazolium dicyanamide ([Emim][DCA]) ionic liquids (ILs) (IL@F-Ce) are introduced as fillers into polyether block amide (PEBAX® 1074) to fabricate mixed matrix membranes (MMMs). The slit-shaped mesoporous structure of the nanosheets facilitates the construction of water vapor rapid transport channels in MMMs. The permeability and selectivity of water vapor for MMMs loaded with F-Ce nanosheets are greatly improved, and the performance of MMMs loaded with IL@F-Ce nanosheets are much better than the former. Particularly, the MMM with IL@F-Ce content of 4 wt.% achieves the highest H₂O permeability of 4.53 × 10⁵ Barrer, which is more than twice that of the pure PEBAX membrane, and the selectivity is increased by 83%. Thus, the MMMs based on 2D mesoporous nanosheets have considerable potential application in industrial-scale dehydration and humidification processes.

A Review on Ionic Liquid Gas Separation Membranes

Ionic liquids have attracted the attention of the industry and research community as versatile solvents with unique properties, such as ionic conductivity, low volatility, high solubility of gases and vapors, thermal stability, and the possibility to combine anions and cations to yield an almost endless list of different structures. These features open perspectives for numerous applications, such as the reaction medium for chemical synthesis, electrolytes for batteries, solvent for gas sorption processes, and also membranes for gas separation. In the search for better-performing membrane materials and membranes for gas and vapor separation, ionic liquids have been investigated extensively in the last decade and a half. This review gives a complete overview of the main developments in the field of ionic liquid membranes since their first introduction. It covers all different materials, membrane types, their preparation, pure and mixed gas transport properties, and examples of potential gas separation applications. Special systems will also be discussed, including facilitated transport membranes and mixed matrix membranes. The main strengths and weaknesses of the different membrane types will be discussed, subdividing them into supported ionic liquid membranes (SILMs), poly(ionic liquids) or polymerized ionic liquids (PILs), polymer/ionic liquid blends (physically or chemically cross-linked 'ion-gels'), and PIL/IL blends. Since membrane processes are advancing as an energy-efficient alternative to traditional separation processes, having shown promising results for complex new separation challenges like carbon capture as well, they may be the key to developing a more sustainable future society. In this light, this review presents the state-of-the-art of ionic liquid membranes, to analyze their potential in the gas separation processes of the future.

Dual-Core Capacitive Microfiber Sensor for Smart Textile Applications

Wearable sensors for smart textile applications have garnered tremendous interest in recent years and can have enormous potential for human machine interfaces and digital health monitoring. Here, we report a soft capacitive microfiber sensor that can be woven seamlessly into textiles for strain measurement. Comprising a dual-lumen elastomeric microtube and liquid metallic alloy, the microfiber sensor enables continual strain perception even after being completely severed. In addition, our microfiber sensor is highly stretchable and flexible and exhibits tunable sensitivity, excellent linearity, a fast response, and negligible hysteresis. More importantly, the microfiber sensor is minimally affected by train rate and compression during strain sensing. Even under drastic environmental changes, the microfiber sensor presents good electrical stability. By integrating the microfiber sensor imperceptibly with textiles, we devise smart textile wearables to interpret hand gestures, detect limb motion, and monitor respiration rate. We believe that this sensor presents enormous potential in unobtrusive continuous health monitoring.

Effects of Operating Parameters on Ionic Liquid Membrane to Remove Humidity in a Green Continuous Process

Membrane processes are promising methods to separate gases from feed streams without phase changing. A hybrid process, the combination of ionic liquids with a ceramic membrane (ILM), has been developed for humidity removal in a green continuous process. This new concept provides a more efficient and available ionic liquid (IL)-based membrane regeneration process, which just switches the moist feed stream to dry air. Furthermore, the ILM presents high stability and mechanical resistance during long-time operation. In addition, the influences of several operating parameters, including flow rate, temperature, absolute pressure, and feed concentration on process efficiency were investigated. The lower inlet flow rate was found to be favorable for drying humid air. Moreover, when the pressure increased, the mass of absorbed water was increased, while the feed concentration had no significant effects on the membrane separation performance. However, the operating temperature had a great effect on humidity removal. It is necessary to note that the processes at room temperature can limit the energy consumption. The absorbing process of ILM remained efficient after several absorption desorption cycles. Therefore, the new ILM hybrid process that has been developed has great potential for consecutive humidity removal processes.