Asymmetrically porous anion exchange membranes with an ultrathin selective layer for rapid acid recovery

Recent advancements in the synthesis of anion exchange membranes and their potential applications in wastewater treatment

Water treatment procedures are increasingly utilized for resource recovery and wastewater disinfection, addressing the current challenges of clean water depletion and wastewater management. Various pollutants, including dyes, acids, pharmaceuticals, and toxic heavy metals have been released into the environment through industrial, domestic, and agricultural activities, posing serious environmental and public health risks. Addressing these issues requires the development of more effective waste treatment processes. Membrane-based treatment technologies offer significant advantages, including high efficiency, versatility, and cost-effectiveness, making them a promising solution for mitigating the impact of these pollutants. In view of this, the potential of ion exchange membranes (IEMs) is continuously increasing due to their advanced characteristics compared to conventional techniques. Anion exchange membranes (AEMs), a special class of IEMs, selectively allow anions to pass through their pores due to the positive charge on their surface. This selective passage aids in resource recovery and removing specific types of pollutants. This review covers preparation methods, modification techniques, and classification of AEMs. It offers a practical classification based on the method of synthesis and structural properties of AEMs. The water-based applications of AEMs including, electrodialysis, diffusion dialysis, and electro-electrodialysis for various wastewater treatments such as heavy metal recovery, dye removal, pharmaceutical removal, and acid separation, have been discussed in detail. Additionally, the effect of various operational parameters on the performance and SWOT (strengths, weaknesses, opportunities, and threats) analysis of AEMs in effluent treatment are presented. The review provides detailed insights into the current status, challenges, and future directions of AEM-based technologies, offering suggestions for future advancements.

Side Chain Crosslinked Anion Exchange Membrane for Acid Concentration by Electrodialysis

Electrodialysis (ED) technology for waste acid treatment has high economic efficiency and environmentally friendly advantages. The primary limitation of ED in the retrieval of low-concentration spent acids lies in the leakage of hydrogen ions through anion exchange membranes (AEMs) due to its extremely small size and high mobility. To address this issue, a series of AEMs named QPAB-x (x = 3, 5, 7, 10) were designed for acid concentration in ED process by increasing the membrane densities through in situ crosslinking in this study. The successful synthesis of polymers was confirmed through 1H nuclear magnetic resonance hydrogen (1H NMR) spectroscopy and Attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy. Furthermore, ATR-FTIR spectroscopy showed that the higher the side chain content, the higher the crosslinking degree of the membranes. X-ray photoelectron spectroscopy (XPS) was employed to characterize the effects of aqueous and acidic environments on QPAB membranes. The performance disparities between QPAB-x membranes in acidic and aqueous environments were examined separately. Subsequently, the influence of crosslinking degree on the acid-blocking capability of the membranes was thoroughly investigated by conducting ED acid-concentration experiments to monitor the hydrogen ions concentration process and determine the current efficiency and energy consumption of the QPAB-x membranes. Our experimental results demonstrated that QPAB-x membranes with higher cross-linking degrees have lower water content, especially the QPAB-10 membrane with an IEC of approximately 1.5 mmol g-1 and a remarkably low water content of around 10%. This leads to a reduced H+ transfer number and excellent acid-blocking properties. Additionally, compared to commercial membrane A2, using the QPAB-10 membrane in the ED process resulted in a higher final H+ concentration in the concentrated chamber. Consequently, these synthesized membranes exhibit considerable promise in the field of ED acid recovery.

A simple method to prepare anion exchange membrane by PVA/EVOH/MIDA for acid recovery by diffusion dialysis

Given the substantial environmental pollution from industrial expansion, environmental protection has become particularly important. Nowadays, anion exchange membranes (AEMs) are widely used in wastewater treatment. With the use of polyvinyl alcohol (PVA), ethylene-vinyl alcohol (EVOH) copolymer, and methyl iminodiacetic acid (MIDA), a series of cross-linked AEMs were successfully prepared using the solvent casting technique, and the network structure was formed in the membranes due to the cross-linking reaction between PVA/EVOH and MIDA. Fourier transform infrared spectrometer, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy were used to analyze the prepared membranes. At the same time, its comprehensive properties which include water uptake, linear expansion rate, ion exchange capacity, thermal stability, chemical stability, and mechanical stability were thoroughly researched. In addition, diffusion dialysis performance in practical applications was also studied in detail. The acid dialysis coefficient (UH+) ranged from 10.2 to 35.6 × 10-3 m/h. Separation factor (S) value ranged from 25 to 38, which were all larger than that of the commercial membrane DF-120 (UH+: 8.5 × 10-3 m/h, S: 18.5). The prepared membranes had potential application value in acid recovery.

Porous Anion Exchange Membrane for Effective Acid Recovery by Diffusion Dialysis

Diffusion dialysis (DD) employing anion exchange membranes (AEMs) presents an attractive opportunity for acid recovery from acidic wastewater. However, challenges exist to make highly acid permeable AEMs due to their low acid dialysis coefficient (Uacid). Here, a series of porous and highly acid permeable AEMs fabricated based on chloromethyl polyethersulfone (CMPES) porous membrane substrate with crosslinking and quaternization treatments is reported. Such porous AEMs show high Uacid because of the large free volume as well as the significantly reduced ion transport resistance relative to the dense AEMs. Compared with the commercial dense DF-120 AEM, our optimal porous AEM show simultaneous 466.7% higher Uacid and 75.7% higher acid/salt separation factor (Sacid/salt) when applied to acid recovery at the same condition. Further, considering the simple and efficient fabrication process as well as the low cost, our membranes show great prospects for practical acid recovery from industrial acidic wastewater.

Porous Polyelectrolytes: The Interplay of Charge and Pores for New Functionalities

The past decade has witnessed rapid advances in porous polyelectrolytes and there is tremendous interest in their synthesis as well as their applications in environmental, energy, biomedicine, and catalysis technologies. Research on porous polyelectrolytes is motivated by the flexible choice of functional organic groups and processing technologies as well as the synergy of the charge and pores spanning length scales from individual polyelectrolyte backbones to their nano-/micro-superstructures. This Review surveys recent progress in porous polyelectrolytes including membranes, particles, scaffolds, and high surface area powders/resins as well as their derivatives. The focus is the interplay between surface chemistry, Columbic interaction, and pore confinement that defines new chemistry and physics in such materials for applications in energy conversion, molecular separation, water purification, sensing/actuation, catalysis, tissue engineering, and nanomedicine.