Simultaneous unzipping and sulfonation of multi-walled carbon nanotubes to sulfonated graphene nanoribbons for nanocomposite membranes in polymer electrolyte fuel cells

Rational design of redox active metal organic frameworks for mediated electron transfer of enzymes

The efficient immobilization of redox mediators remains a major challenge in the design of mediated enzyme electrode platforms. In addition to stability, the ability of the redox-active material to mediate electron transfer from the active-site buried enzymes, such as flavin adenine dinucleotide-dependent glucose dehydrogenase (FADGDH) and lactate oxidase (LOx), is also crucial. Conventional immobilization techniques can be synthetically challenging, and immobilized mediators often exhibit limited durability, particularly in continuous operation. Here, we design a novel redox-active cobalt-based metal-organic framework (raMOF) obtained via the partial ligand substitution of 2-methylimidazole (MeIm) with a 1,2-naphthoquinone-4-sulfonate (NQSO) redox probe, as a promising platform for high-performance enzyme electrodes. This nanostructured raMOF, combined with multi-walled carbon nanotubes (CNTs), provided a high current density of up to 2.06 mA cm-2 during enzymatic reactions and maintained remarkable operational stability, retaining 100% of its current over 54 hours. This stability far exceeded that of adsorbed NQSO on CNTs, which experienced a complete loss of the initial current, highlighting the significant advantage of the raMOF-based platform for high-performance enzyme electrodes.

Chiroptical Transitions of Enantiomeric Ligand-Activated Nickel Oxides

Ligand-induced chirality in transition-metal oxide (TMO) nanostructures have great potential for designing materials with tunable chiroptical effects. Herein, a facile strategy is reported to prepare chiroptical active nickel-oxide hybrids combined with pH adjustment, and the redox treatment results in ligand transformation, which is attributable to multiple optical transitions in the TMO nanostructures. The theoretical calculation also explains the chiral origins based on their complex models based on empirical analysis. It is also shown that enantiomeric TMO nanoparticles can be used as chiral inducers for chiroptical sensitive polymerization. These results demonstrate that TMO nanostructures can provide rational control over photochemical synthesis and chiral transfer of inorganics nanoarchitecture chirality.

Fabrication of novel hybrid Z-Scheme WO3@g-C3N4@MWCNT nanostructure for photocatalytic degradation of tetracycline and the evaluation of antimicrobial activity

Exploring highly efficient visible-light-driven photocatalyst for the elimination organic pollutants is a great concern for constructing sustainable green energy systems. In the current work, a novel hybrid ternary WO₃@g-C₃N₄@MWCNT nanocomposites have been fabricated for visible-light-driven photocatalyst by self-assembly method. The as-prepared photocatalyst was examined by XRD, Raman, FESEM, HRTEM, XPS EDS, EIS, UV-visible DRS, and PL analysis. The experimental results revealed that the photocatalytic activity of WO₃@g-C₃N₄@MWCNT nanocomposites on the degradation of Tetracycline (TC) is 79.54% at 120 min, which is higher than the binary WO₃@g-C₃N₄ composite and pristine WO₃. The improved degradation performance towards TC is recognized for its higher surface area, intense light absorption towards the visible region, and enhanced charge separation efficiency. Consequently, the fabricated catalyst endows a promising application for antibiotic degradation.

Polyphenol derived bioactive carbon quantum dots incorporated multifunctional hydrogel as oxidative stress attenuator for antiaging and in vivo wound-healing applications

Upregulation of certain enzymes, such as collagenase, tyrosinase, and elastase, is triggered by several extrinsic environmental factors, such as temperature, UV radiation, humidity, and stress, and leads to elasticity loss...

Facile Surfactant-Assisted Synthesis of BiVO4 Nanoparticulate Films for Solar Water Splitting

Bismuth vanadate (BiVO4), which has attractive applicability as a photoactive material, presents applications that range from catalysis to water treatment upon visible light irradiation. In this study, we develop a simple synthesis of < 200 nm monoclinic BiVO4 nanoparticles, which were further deposited on transparent conductive substrates by spin coating and calcination, obtaining nanostructured films. The obtained nanostructured BiVO4 photoanodes were tested for water oxidation, leading to promising photocurrents exhibiting competitive onset potentials (~0.3 V vs. RHE). These nanoparticulate BiVO4 photoanodes represent a novel class of highly potential materials for the design of efficient photoelectrochemical devices.

Potential carbon nanomaterials as additives for state-of-the-art Nafion electrolyte in proton-exchange membrane fuel cells: a concise review

Proton-exchange membrane fuel cells (PEMFCs) have received great attention as a potential alternative energy device for internal combustion engines due to their high conversion efficiency compared to other fuel cells. The main hindrance for the wide commercial adoption of PEMFCs is the high cost, low proton conductivity, and high fuel permeability of the state-of-the-art Nafion membrane. Typically, to improve the Nafion membrane, a wide range of strategies have been developed, in which efforts on the incorporation of carbon nanomaterial (CN)-based fillers are highly imperative. Even though many research endeavors have been achieved in relation to CN-based fillers applicable for Nafion, still their collective summary has rarely been reported. This review aims to outline the mechanisms involved in proton conduction in proton-exchange membranes (PEMs) and the significant requirements of PEMs for PEMFCs. This review also emphasizes the improvements achieved in the proton conductivity, fuel barrier properties, and PEMFC performance of Nafion membranes by incorporating carbon nanotubes, graphene oxide, and fullerene as additives.

Removal of As(V) by iron-based nanoparticles synthesized via the complexation of biomolecules in green tea extracts and an iron salt

While iron-based nanoparticles (nFe) prepared using green tea extracts have been successfully used to degrade many organic contaminants, their application to remove As(V) remains limited. Thus, in this work, nFe (GT-1) prepared using a green tea extract was used to removal As(V). The maximum adsorption capacity of GT-1 for As(V) was 19.9 mg g^-1 at 298 K. The formation of GT-1 and the removal mechanism of As(V) by GT-1, was examined using XRD, TEM and SEM, which showed that GT-1 was composed of amorphous particulates sized between 50 and 100 nm. GC-MS and LC-MS analysis also showed that biomolecules presented in the green tea extract, including polyphenols and L-theanine, participated in the formation of GT-1. Mössbauer spectral analysis confirmed that an organo-Fe(III) complex was formed due to the reaction between biomolecules and Fe(III). FTIR and XPS showed that the adsorption of As(V) by GT-1 occurred both via complexation with Fe(III) in GT-1 and via coordination of As(V) with free hydroxyl groups on the surface of GT-1. Batch experiments showed that adsorption was spontaneous and conformed to the pseudo-second order kinetic model. Finally, mechanisms for the formation of GT-1 and the removal of As (V) by GT-1 were proposed.

Antibody Micropatterned Lubricant-Infused Biosensors Enable Sub-Picogram Immunofluorescence Detection of Interleukin 6 in Human Whole Plasma

Recent studies have shown a correlation between elevated interleukin 6 (IL-6) concentrations and the risk of respiratory failure in COVID-19 patients. Therefore, detection of IL-6 at low concentrations permits early diagnosis of worst-case outcome in viral respiratory infections. Here, a versatile biointerface is presented that eliminates nonspecific adhesion and thus enables immunofluorescence detection of IL-6 in whole human plasma or whole human blood during coagulation, down to a limit of detection of 0.5 pg mL^-1 . The sensitivity of the developed lubricant-infused biosensor for immunofluorescence assays in detecting low molecular weight proteins such as IL-6 is facilitated by i) producing a bioink in which the capture antibody is functionalized by an epoxy-based silane for covalent linkage to the fluorosilanized surface and ii) suppressing nonspecific adhesion by patterning the developed bioink into a lubricant-infused coating. The developed biosensor addresses one of the major challenges for biosensing in complex fluids, namely nonspecific adhesion, therefore paving the way for highly sensitive biosensing in complex fluids.

Enhanced Proton Conductivity in Sulfonated Poly(ether ether ketone) Membranes by Incorporating Sodium Dodecyl Benzene Sulfonate

It is of great importance to improve the proton conductivity of proton exchange membranes by easy-handling and cost-efficient approaches. In this work, we incorporated a commercially obtained surfactant, sodium dodecyl benzene sulfonate (SDBS), into sulfonated poly(ether ether ketone) (SPEEK) through solution casting to prepare SPEEK/SDBS membranes. When no more than 10 wt % SDBS was added, the SDBS was well dissolved into the SPEEK matrix, and the activation energy for the proton transfer in the SPEEK/SDBS membranes was greatly reduced, leading to significant enhancement of the membrane proton conductivity. Compared with the SPEEK control membrane, the SPEEK/SDBS membrane with 10 wt % SDBS showed a 78% increase in proton conductivity, up from 0.051 S cm-1 to 0.091 S cm-1, while the water uptake increased from 38% to 62%. Moreover, the SPEEK/SDBS membrane exhibited constant proton conductivity under a long-term water immersion test.

A copper–trimesic acid metal–organic framework incorporated sulfonated poly(ether ether ketone) based polymer electrolyte membrane for direct methanol fuel cells

A copper–trimesic acid (Cu–TMA) metal–organic framework incorporated in sPEEK shows restricted methanol crossover in DMFCs.

Synthesis and cryogenic mechanical properties of CO2-blown carbon-reinforced polyurethane foam

In the present study, carbon-nanotube-polyurethane foams were synthesized by adding (0.02, 0.1, and 0.3 wt%) carbon nanotubes during the polymerization reaction between polyol and isocyanate liquids. After the synthesis process, the microstructural cell morphology of the carbon-nanotube-polyurethane foams, based on the amount of carbon nanotubes, was observed using field emission scanning electron microscopy. To evaluate the mechanical characteristics of the carbon-nanotube-polyurethane foams, temperature-dependent (20°C, −90°C, and −163°C) compressive tests were performed, and the results were compared to those of the pure polyurethane foam to verify the effectiveness of the developed carbon-nanotube-polyurethane foams. Specifically, the effects of the weight percent of carbon nanotubes, density, and temperature on the overall behavior of the carbon-nanotube-polyurethane foams were considered. Finally, the permanent deformation ratio and material failure characteristics were investigated. The results showed that the cell morphology and compressive strength of the carbon-nanotube-polyurethane foam with 0.02 wt% carbon nanotubes were superior to those of pure polyurethane foam, and these properties showed a significant dependence on the weight percent of carbon nanotubes, test temperatures, and the density.

Effect of carbon derivatives in sulfonated poly(etherimide)-liquid crystal polymer composite for methanol vapor sensing

A class of highly sensitive chemiresistive sensors is developed for methanol (MeOH) vapor detection in ambient atmosphere by introducing conductive nanofillers like carbon black, multi-wall carbon nanotubes, and reduced graphene oxide into sulfonated poly(etherimide) (PEI)/liquid crystal polymer (LCP) composite (sPEI-LCP). Polar composites are prepared by a sulfonation process for instantaneous enhancement in adsorption capability of the sensing films to the target analyte (MeOH). Sensing properties exhibit that polymer composite-based fabricated sensors are efficient for the detection of different concentration of methanol vapor from 300-1200 parts-per-million (ppm) at room temperature. The incorporation of nanofiller induces the dramatic change in sensing behavior of base composite film (sPEI-LCP). Thus, less mass fraction of nanofillers (i.e. 2 wt%) influences the nonlinear sensing behavior for the entire range of methanol vapor. The simple method and low fabrication cost of the prepared sensor are compelling reasons that methanol vapor sensor is suitable for environmental monitoring.

Nanocomposite membranes of sulfonated poly(phthalalizinone ether ketone)–sulfonated graphite nanofibers as electrolytes for direct methanol fuel cells

Polymer nanocomposite membranes are prepared by the dispersion of sulfonated graphite nanofibers (SGNF) in the sulfonated poly(phthalazinone ether ketone) (SPPEK) matrix.