Mechanism of formation of hollow fiber membranes for membrane distillation: 1. Inner coagulation power effect on morphological characteristics

Electrospinning of a Copolymer PVDF-co-HFP Solved in DMF/Acetone: Explicit Relations among Viscosity, Polymer Concentration, DMF/Acetone Ratio and Mean Nanofiber Diameter

The process of electrospinning polymer solutions depends on many entry parameters, with each having a significant impact on the overall process and where complexity prevents the expression of their interplay. However, under the assumption that most parameters are fixed, it is possible to evaluate the mutual relations between pairs or triples of the chosen parameters. In this case, the experiments were carried out with a copolymer poly(vinylidene-co-hexafluoropropylene) solved in mixed N,N'-dimethylformamide (DMF)/acetone solvent for eight polymer concentrations (8, 10, 12, 15, 18, 21, 24, and 27 wt.%) and five DMF/acetone ratios (1/0, 4/1, 2/1, 1/1, 1/2). Processing of the obtained data (viscosity, mean nanofiber diameter) aimed to determine algebraic expressions relating both to viscosity and a mean nanofiber diameter with polymer concentration, as well as DMF/acetone ratio. Moreover, a master curve relating these parameters with no fitting factors was proposed continuously covering a sufficiently broad range of concentration as well as DMF/acetone ratio. A comparison of algebraic evaluation with the experimental data seems to be very good (the mean deviation for viscosity was about 2%, while, for a mean nanofiber diameter was slightly less than 10%).

Influence of bore fluid composition on the physiochemical properties and performance of hollow fiber membranes for ultrafiltration

Porous hollow fiber polysulfone (PSf) membranes were fabricated via a phase-inversion process and their performance during ultrafiltration (UF) was evaluated. The effects of the composition and concentration (0-50%) of different bore fluid mixtures, including N-methyl-2-pyrrolidone (NMP)/water, glycerol (G)/water, and ethylene glycol (EG)/water (in comparison with pure deionized water), on the structure, physicochemical properties, and performance of the fabricated membranes was investigated. Using these various bore fluid mixtures altered the thermodynamic and kinetic properties of the phase inversion system, and changed the morphology and structure of the fabricated membranes, especially on the lumen side. Increasing concentrations of NMP, G, and EG in the bore fluid resulted in increased pore size, porosity, and hydrophilicity. These bore fluid mixtures exhibited a strong influence on the perm-selectivity of the as-spun hollow fiber membranes. The membrane fabricated using 50% NMP/water as the bore fluid mixture exhibited the highest water flux of 166.98 LMH with a bovine serum albumin rejection rate of more than 97%. Overall, this study introduces an easy and effective way to control the structure of the membrane through bore fluid modification and shows how the inner skin layer properties can have a remarkable effect on water permeance, even in the out-in filtration test.

Preparation and characterization of a novel positively charged composite hollow fiber nanofiltration membrane based on chitosan lactate

A positively charged composite hollow fiber nanofiltration (NF) membrane was prepared via interfacial polymerization by using chitosan lactate and trimesoyl chloride (TMC).