Fabrication of high flux nanofiltration membrane via hydrogen bonding based co-deposition of polydopamine with poly(vinyl alcohol)

Chitosan/polyvinyl alcohol film loading β-acids/β-cyclodextrin inclusion complex: A shelf-life extension strategy for strawberry

Fabricating food packaging films with multifunction (antibacterial, antioxidant, and controlled-release properties) represents a powerful strategy for extending the shelf life and enhancing the safety of perishable fruits. Herein, chitosan (CS) and polyvinyl alcohol (PVA) composite films were loaded inclusion complex (IC) with different concentrations of β-acids/β-cyclodextrin (β-acids/β-CD) or β-acids/hydroxyethyl-β-cyclodextrin (β-acids/HE-β-CD) inclusion complex. Moreover, the films' physical, chemical, and biological properties were systematically investigated. Satisfyingly, these composite films exhibited excellent mechanical properties and thermal stability. As the concentration of the inclusion complex improved, the hydrophobicity of the functionalized films also enhanced (76.50°-108.59°/110.04°). Furthermore, variations in pH were discovered that it could affect β-acids release from films. A significant enhancement in the antioxidant capacity of films could be clearly observed with increased concentrations of the inclusion complex (from 5.56 % to 72.98 %/73.47 %). Additionally, films expressed outstanding antibacterial activity against Gram-positive bacteria (S. aureus) (inhibition zone >10.89 mm), with those loading β-acids/β-CD demonstrating a stronger antibacterial effect than those loading β-acids/HE-β-CD. For the preservation of strawberries - the typical representative of perishable fruits, the films significantly extended their shelf life to eight days. As the content of the inclusion complex of β-acids in the film increased, the weight loss dramatically reduced (39.91 % without film vs. 23.12 % with HE-β-CD@CS/PVA film). Overall, the CS/PVA films loading β-acids/β-CD display remarkable multifunctionality and value as a fresh-preserving packaging material with sustained release performance and notable bioactivity.

Immunomodulatory and bone regenerative properties of copper/procyanidins-modified titanium surfaces

The inflammatory response triggered by the interaction between implants and macrophages is essential for bone regeneration around these implants. This study presents the application of dopamine hydrochloride to develop a copper and procyanidins coating on titanium surfaces to investigate its effects on bacterial inhibition, macrophage polarization, and osteogenic differentiation. The results demonstrated that this copper/procyanidins coating significantly suppressed the growth of Escherichia coli and Staphylococcus aureus. Notably, the initial release of Cu2+ ions promoted macrophage polarization toward a pro-inflammatory phenotype while stimulating the secretion of anti-inflammatory factors. Subsequently, the reduced Cu2+ release combined with procyanidins facilitated the transition from M1 to M2 macrophages-an essential process for bacterial phagocytosis and bone regeneration. Furthermore, this coating enhanced the secretion of osteogenic factors by bone marrow mesenchymal stem cells, enhancing their osteogenic differentiation and integration with bone tissue. These findings highlight the potential of copper/procyanidins coating in developing implant surfaces with immune-modulating and sustained antibacterial properties.

Synergistic effects of deep eutectic solvents on the morphology and performance of polysulfone ultrafiltration membranes

This study investigates the synthesis of flat sheet asymmetric Polysulfone (PSF) membranes using the Non-Solvent Induced Phase Separation (NIPS) method, enhanced by incorporating Deep Eutectic Solvents (DES) composed of Choline Chloride (ChCl) and DL-Malic Acid (MA). The research explores the individual and combined effects of ChCl and MA on membrane morphology and performance. Comprehensive characterization techniques, including Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy-Universal Attenuated Total Reflectance (FTIR-UATR), and Atomic Force Microscopy (AFM), were employed to analyze the structural and surface properties of the membranes. Key performance metrics such as Pure Water Permeability (PWP), protein and dye rejection, fouling behavior, porosity, surface hydrophilicity, and mechanical strength were evaluated. Results demonstrated that integrating DES into the PSF matrix significantly improved membrane properties. The 3% DES membrane exhibited the highest Pure Water Permeability (PWP) of 186.82 L/m2h/bar, the lowest water contact angle of 68.8°, and optimal balance in surface roughness parameters, leading to superior antifouling properties with high flux recovery ratio (FRR) and balanced reversible (Rr) and irreversible fouling (Rir) components. The ChCl (HBA) membrane displayed a notable PWP of 121.62 L/m2h/bar, large pore sizes (42.72 nm), and moderate surface roughness (Ra of 3.32 nm). In contrast, the MA (HBD) membrane demonstrated the highest hydrophilicity with the lowest contact angle (70.7°) and a compact, robust structure, despite its smallest pore sizes and lack of permeability. The findings underscore the synergistic effect of DES formation in the membrane, improving overall performance for ultrafiltration applications. This study provides valuable insights into the distinct roles of ChCl as an HBA and MA as an HBD in DES-modified PSF membranes, revealing their individual contributions and the importance of optimizing DES components and concentrations for specific filtration applications.

Capture and Storage of Cell-Free DNA via Bio-Informational Hydrogel Microspheres

Excessive cell-free DNA (cfDNA) can induce chronic inflammation by activating intracellular nucleic acid sensors. Intervention in cfDNA-mediated "pro-inflammatory signaling transduction" could be a potential alleviating strategy for chronic inflammation, such as in diabetic wounds. However, effectively and specifically downgrading cfDNA concentration in the pathological microenvironment remains a challenge. Therefore, this work prepares free-standing polydopamine nanosheets through DNA-guided assembly and loaded them into microfluidic hydrogel microspheres. The π─π stacking/hydrogen bonding interactions between polydopamine nanosheets and the π-rich bases of cfDNA, along with the cage-like spatial confinement created by the hydrogel polymer network, achieved cfDNA capture and storage, respectively. Catechol in polydopamine nanosheets can also assist in reducing reactive oxygen species (ROS) levels. Efficient cfDNA binding independent of serum proteins, specific interdiction of abnormal activation of cfDNA-associated toll-like receptor 9, as well as down-regulation of inflammatory cytokines and ROS levels are shown in this system. The chronic inflammation alleviating and the pro-healing effects on the mice model with diabetic wounds are also investigated. This work presents a new strategy for capturing and storing cfDNA to intervene in cell signaling transduction. It also offers new insights into the regulatory mechanisms between inflammatory mediators and biomaterials in inflammation-related diseases.

A Comprehensive Review of Performance of Polyacrylonitrile-Based Membranes for Forward Osmosis Water Separation and Purification Process

Polyacrylonitrile (PAN), with its unique chemical, electrical, mechanical, and thermal properties, has become a crucial acrylic polymer for the industry. This polymer has been widely used to fabricate ultrafiltration, nanofiltration, and reverse osmosis membranes for water treatment applications. However, it recently started to be used to fabricate thin-film composite (TFC) and fiber-based forward osmosis (FO) membranes at a lab scale. Phase inversion and electrospinning methods were the most utilized techniques to fabricate PAN-based FO membranes. The PAN substrate layer could function as a good support layer to create TFC and fiber membranes with excellent performance under FO process conditions by selecting the proper modification techniques. The various modification techniques used to enhance PAN-based FO performance include interfacial polymerization, layer-by-layer assembly, simple coating, and incorporating nanofillers. Thus, the fabrication and modification techniques of PAN-based porous FO membranes have been highlighted in this work. Also, the performance of these FO membranes was investigated. Finally, perspectives and potential directions for further study on PAN-based FO membranes are presented in light of the developments in this area. This review is expected to aid the scientific community in creating novel effective porous FO polymeric membranes based on PAN polymer for various water and wastewater treatment applications.

Preparation and Characterization of Dopamine-Modified Carbon Fiber Paper Composites for Gas Diffusion Layers

Carbon fibers (CFs) cannot be directly used for the preparation of CF paper because of their chemically inert nature. Herein, the surface of CFs was modified using the spontaneous oxidative self-polymerization of dopamine. By taking full advantage of the spontaneous oxidation and self-polymerization properties of PD to maintain the maximum strength of CFs, a polydopamine-modified CF paper (PDA-CFP) with excellent performance was prepared using PD-modified CFs (PDA-CFs). This increased the proportion of hydrophilic functional groups on the surface of carbon fibers, increased the O/C ratio on the CF surface by 6 times, and improved the bond strength between the modified CF and the adhesive by making full use of the interaction force between polydopamine and PVA fibers. In this way, the primary properties of the CF paper were improved. Overall, the results showed that the dispersion of CF was considerably improved with dopamine modification. In addition, the primary physical properties of PDA-CFP were better than those of virgin CF paper (CFP-0). PDA-CFP exhibited a maximum tensile strength of 2.04 kN·m-1, a minimum resistivity of 0.06055 Ω·cm-1, and a minimum porosity of 72.4%. The tightness was increased by up to 12.1%.

Water-dispersible and stable polydopamine coated cellulose nanocrystal-MXene composites for high transparent, adhesive and conductive hydrogels

High conductive and transparent hydrogels with adhesion function are ideal candidates for soft electronic devices. However, it remains a challenge to design appropriate conductive nanofillers to endow hydrogels with all these characteristics. The 2D MXene sheets are promising conductive nanofillers for hydrogels due to excellent electricity and water-dispersibility. However, MXene is quite susceptible to oxidation. In this study, polydopamine (PDA) was employed to protect the MXene from oxidation and meanwhile endow hydrogels with adhesion. However, PDA coated MXene (PDA@MXene) were easily flocculated from dispersion. 1D cellulose nanocrystals (CNCs) were employed as steric stabilizers to prevent the agglomeration of MXene during the self-polymerization of dopamine. The obtained PDA coated CNC-MXene (PCM) sheets display outstanding water-dispersible and anti-oxidation stability and are promising conductive nanofillers for hydrogels. During the fabrication of polyacrylamide hydrogels, the PCM sheets were partially degraded into PCM nanoflakes with smaller size, leading to transparent PCM-PAM hydrogels. The PCM-PAM hydrogels can self-adhere to skin, and possess high transmittance of 75 % at 660 nm, superior electric conductivity of 4.7 S/m with MXene content as low as 0.1 % and excellent sensitivity. This study will facilitate the development of MXene based stable, water-dispersible conductive nanofillers and multi-functional hydrogels.

Progress for Co-Incorporation of Polydopamine and Nanoparticles for Improving Membranes Performance

Incorporating polydopamine has become a viable method for membrane modification due to its universality and versatility. Fillers in their different categories have been confirmed as effective elements to improve the properties of membranes such as hydrophilicity, permeability, mechanical strength, and fouling resistance. Thus, this paper mainly highlights the recent studies that have been carried out using polydopamine and nanomaterial fillers simultaneously in modifying the performance of different membranes such as ultrafiltration, microfiltration, nanofiltration, reverse osmosis, and forward osmosis membranes according to the various modification methods. Graphene oxide nanoparticles have recently attracted a lot of attention among different nanoparticles used with polydopamine, due to their impressive characteristics impacts on enhancing membrane hydrophilicity, mechanical strength, and fouling resistance. Thus, the incorporation techniques of graphene oxide nanoparticles and polydopamine for enhancing membranes have been highlighted in this work. Moreover, different studies carried out on using polydopamine as a nanofiller for optimizing membrane performance have been discussed. Finally, perspectives, and possible paths of further research on mussel-inspired polydopamine and nanoparticles co-incorporation are stated according to the progress made in this field. It is anticipated that this review would provide benefits for the scientific community in designing a new generation of polymeric membranes for the treatment of different feed water and wastewater based on adhesive mussel inspired polydopamine polymer and nanomaterials combinations.

Development of Novel Composite Membranes in Water/Wastewater Treatment

Composite membranes have attracted significant attention due to their flexibility in having more than one layer, with many materials being used to form the membrane [...]

Polydopamine Functionalized Graphene Oxide as Membrane Nanofiller: Spectral and Structural Studies

High-degree functionalization of graphene oxide (GO) nanoparticles (NPs) using polydopamine (PDA) was conducted to produce polydopamine functionalized graphene oxide nanoparticles (GO-PDA NPs). Aiming to explore their potential use as nanofiller in membrane separation processes, the spectral and structural properties of GO-PDA NPs were comprehensively analyzed. GO NPs were first prepared by the oxidation of graphite via a modified Hummers method. The obtained GO NPs were then functionalized with PDA using a GO:PDA ratio of 1:2 to obtain highly aminated GO NPs. The structural change was evaluated using XRD, FTIR-UATR, Raman spectroscopy, SEM and TEM. Several bands have emerged in the FTIR spectra of GO-PDA attributed to the amine groups of PDA confirming the high functionalization degree of GO NPs. Raman spectra and XRD patterns showed different crystalline structures and defects and higher interlayer spacing of GO-PDA. The change in elemental compositions was confirmed by XPS and CHNSO elemental analysis and showed an emerging N 1s core-level in the GO-PDA survey spectra corresponding to the amine groups of PDA. GO-PDA NPs showed better dispersibility in polar and nonpolar solvents expanding their potential utilization for different purposes. Furthermore, GO and GO-PDA-coated membranes were prepared via pressure-assisted self-assembly technique (PAS) using low concentrations of NPs (1 wt. %). Contact angle measurements showed excellent hydrophilic properties of GO-PDA with an average contact angle of (27.8°).

Enhancing nanofiltration performance by incorporating tannic acid modified metal-organic frameworks into thin-film nanocomposite membrane

Nanofiltration (NF) is an advanced environmental technology in water treatment. To thin film nanocomposite (TFN) membrane, good compatibility between nanofillers and polyamide (PA) layer is the guarantee of remarkable performance. Herein, tannic acid (TA) was employed as modifier of UIO-66-NH₂ prior to the interfacial polymerization (IP). With TA modification, more interaction can be formed so that the compatibility between nanofillers and PA layer can be promoted at the molecular level. Characterizations demonstrated the coating of TA on UIO-66-NH₂, together with successful introducing of nanofillers in TFN membranes. Compared to pristine thin film composite (TFC) membrane, both UIO-incorporated TFN (TFN-U) and TA modified UIO-incorporated TFN (TFN-TU) membranes showed higher permeance (111.2% and 93% enhancement, respectively). However, under the same nanofillers dose, TFN-TU exhibited slightly lower permeance and higher rejection than TFN-U since the bridging effect of TA healed non-selective voids in skin layer. With the increasing of nanofiller dose in IP, TFN-TU remained reasonable selectivity while TFN-U failed to. Moreover, TFN-TU showed better anti-fouling property due to TA modification. Introducing TA modified MOFs into IP can serve as an ingenious strategy for TFN membrane to achieve high-quality environmental applications.

Asymmetric polyamide nanofilms with highly ordered nanovoids for water purification

Tailor-made structure and morphology are critical to the highly permeable and selective polyamide membranes used for water purification. Here we report an asymmetric polyamide nanofilm having a two-layer structure, in which the lower is a spherical polyamide dendrimer porous layer, and the upper is a polyamide dense layer with highly ordered nanovoids structure. The dendrimer porous layer was covalently assembled in situ on the surface of the polysulfone (PSF) support by a diazotization-coupling reaction, and then the asymmetric polyamide nanofilm with highly ordered hollow nanostrips structure was formed by interfacial polymerization (IP) thereon. Tuning the number of the spherical dendrimer porous layers and IP time enabled control of the nanostrips morphology in the polyamide nanofilm. The asymmetric polyamide membrane exhibits a water flux of 3.7−4.3 times that of the traditional monolayer polyamide membrane, showing an improved divalent salt rejection rate (more than 99%), which thus surpasses the upper bound line of the permeability−selectivity performance of the existing various structural polyamide membranes. We estimate that this work might inspire the preparation of highly permeable and selective reverse osmosis (RO), organic solvent nanofiltration (OSNF) and pervaporation (PV) membranes.

Structure and morphology are critical to the performance of permeable and selective polyamide membranes in water purification. Here, the authors report a two layer asymmetric polyamide nanofilm in which a spherical polyamide dendrimer porous lower and a polyamide dense upper layer form hierarchical nanovoids.

Investigating the effect of temperature on calcium sulfate scaling of reverse osmosis membranes using FTIR, SEM-EDX and multivariate analysis

Membrane fouling is one of the major hurdles in widespread use of seawater reverse osmosis (SWRO) in desalination industry. There are various factors that affect the inorganic fouling or scaling of Reverse osmosis (RO) membranes. In this research, the effect of temperature on scaling of RO and Graphene oxide (GO) coated RO membrane by calcium sulfate was investigated. It was found that the increase in temperature enhanced the membrane scaling which was evident by the severe flux decline over time leading to increase in mass of crystals precipitated (M_t) and thickness of the scale layer. There was strong positive correlation (R² ≥ 0.97) noted between M_t and the temperature. The results of SEM-EDX and XRD confirmed that the crystals formed under the experimental conditions are gypsum. Results of this research showed that there was no significant difference in terms of crystal morphology, scaling intensity and mechanism after modifying RO membrane with GO. It was noted that the morphology of the crystals varied from rod shaped to rosette structures under the influence of temperature. Furthermore, the results of FTIR helped to understand the mechanism of interaction between the membranes and the gypsum. The hydrophilicity of the scaled membrane was also measured to investigate the changes in the properties of the membrane after scaling.

Dependence of initial silica scaling on the surface physicochemical properties of reverse osmosis membranes during bench-scale brackish water desalination

Silica scaling of reverse osmosis membranes in brackish water desalination is less understood than hardness scaling due to the complex silica behaviors at the membrane/water interface. In this study, -COOH, -SO₃H, -NH₂ and -OH functional groups were introduced onto polyamide membranes to create distinct surface physicochemical properties. The resulting membranes were further studied under similar scaling conditions to yield temporal flux loss data that were empirically interpreted by a logistic growth model. The scaled membranes were also characterized by complementary analytical techniques. It was found that permeate flux loss was strongly correlated to the initial silica layer formed by direct interaction between reactive silanol (Si-OH) and reciprocal groups on the membrane surface, rather than the entire scaling layer. Importantly, membrane surface properties dictated the initial silica layer formation through three possible mechanisms, i.e., electrostatic repulsion, competitive adsorption, and interfacial energy change. Of these, electrostatic repulsion was identified as the primary one. Therefore, by modifying the membrane surface properties, the three aforementioned mechanisms may be enhanced to favor the formation of a loose, disordered initial silica scaling layer. Accordingly, membrane flux loss may be mitigated. This finding provided important insights into the design heuristics of scaling-resistant reverse osmosis membrane for brackish water desalination.