Preparation and properties of polyvinyl alcohol (PVA) / mesoporous silica supported phosphotungstic acid (MS-HPW) hybrid membranes for alkali recovery

Advances in the Use of Nanocomposite Membranes for Carbon Capture Operations

The adoption of nanodoped membranes in the areas of gas stream separation, water, and wastewater treatments due to the physical and operational advantages of such membranes has significantly increased. The literature has shown that the surface structure and physicochemical properties of nanodoped membranes contribute significantly to the interaction and rejection characteristics when compared to bare membranes. This study reviews the recent developments on nanodoped membranes, and their hybrids for carbon capture and gas separation operations. Features such as the nanoparticles/materials and hybrids used for membrane doping and the effect of physicochemical properties and water vapour in nanodoped membrane performance for carbon capture are discussed. The highlights of this review show that nanodoped membrane is a facile modification technique which improves the membrane performance in most cases and holds a great potential for carbon capture. Membrane module design and material, thickness, structure, and configuration were identified as key factors that contribute directly, to nanodoped membrane performance. This study also affirms that the three core parameters satisfied before turning a microporous material into a membrane are as follows: high permeability and selectivity, ease of fabrication, and robust structure. From the findings, it is also observed that the application of smart models and knowledge-based systems have not been extensively studied in nanoparticle-/material-doped membranes. More studies are encouraged because technical improvements are needed in order to achieve high performance of carbon capture using nanodoped membranes, as well as improving their durability, permeability, and selectivity of the membrane.

Study of Polyvinyl Alcohol-SiO2 Nanoparticles Polymeric Membrane in Wastewater Treatment Containing Zinc Ions

The main goal of the present paper was to synthesize the polyvinyl alcohol-SiO₂ nanoparticles polymeric membrane by wet-phase inversion method. The efficiency of prepared membranes (without and with SiO₂) was investigated using a versatile laboratory electrodialysis system filled with simulated wastewaters that contain zinc ions. All experiments were performed at following conditions: the applied voltage at electrodes of 5, 10 and 15 V, a concentration of zinc ions solution of 2 g L⁻¹, time for each test of 1 h and at room temperature. The demineralization rate, extraction percentage of zinc ions, current efficiency and energy consumption were determined. The polymeric membranes were characterized by Fourier Transforms Infrared Spectroscopy-Attenuated Total Reflection (FTIR-ATR), Scanning Electron Microscopy (SEM) and Electrochemical Impedance Spectroscopy (EIS). The higher value of percentage removal of zinc ions (over 65%) was obtained for the polymeric membrane with SiO₂ nanoparticles, at 15 V. The FTIR-ATR spectra show a characteristic peak located at ~1078 cm⁻¹ assigned to the Si-O-Si asymmetrical stretching. SEM images of the polymeric membrane with SiO₂ nanoparticles show that the nanoparticles and polymer matrix were well compatible. The impedance results indicated that the SiO₂ nanoparticles induced the higher proton conductivity. The final polymeric membranes can be used for the removal of various metallic ions, dyes, organic or inorganic colloids, bacteria or other microorganisms from different natural waters and wastewaters.

Regulation of Polyvinyl Alcohol/Sulfonated Nano-TiO2 Hybrid Membranes Interface Promotes Diffusion Dialysis

It is important to emphasize that the adjustment of an organic–inorganic interfacial chemical environment plays an important role during the separation performance of composite materials. In this paper, a series of hybrid membranes were prepared by blending polyvinyl alcohol (PVA) solution and sulfonated nano-TiO₂ (SNT) suspension. The effects of different interfacial chemical surroundings on ions transfer were explored by regulating the dosage content of SNT. The as-prepared membranes exhibited high thermal and mechanical stability, with initial decomposition temperatures of 220–253 °C, tensile strengths of 31.5–53.4 MPa, and elongations at break of 74.5–146.0%. The membranes possessed moderate water uptake (WR) values of 90.9–101.7% and acceptable alkali resistances (swelling degrees were 187.2–206.5% and weight losses were 10.0–20.8%). The as-prepared membranes were used for the alkali recovery of a NaOH/Na₂WO₄ system via the diffusion dialysis process successfully. The results showed that the dialysis coefficients of OH⁻ (U_OH) were in a range of 0.013–0.022 m/h, and separate factors (S) were in an acceptable range of 22–33. Sulfonic groups in the interfacial regions and –OH in the PVA main chains were both deemed to play corporate roles during the transport of Na⁺ and OH⁻.

Hybrid membrane with controllable surface microroughness by micro-nano structure processing for diluted PM2.5 capture

Tremendous efforts have been devoted by researchers on air particulate matter pollution for the increasing harm, however, the Air Pollution Index (API) from "good" to "excellent" is something hard to achieve. Here, halloysite nanotubes/polyvinyl alcohol (HNTs/PVA) hybrid membrane with surface micro-nano structure processing using a one-step method for efficient PM_2.5 capture was prepared. The filtration efficiency is 45.35% and the pressure drop is 41.57 Pa of composite membrane with a 60 wt% halloysite dosage. Specially, it resulted in a relatively safer PM index value of about 16.54, which tends to be more stringent than the restriction by Government of China (PM_2.5 < 35 μg/m³). The filtration performance was mainly attributed to the controllable microroughness surface as well as the hierarchical structure constructed by one-step method, which has a functional role in obstruction and adsorption for diluted PM_2.5. The methodology can employ halloysite onto various polymers, like polyvinyl alcohol (PVA), polyvinylpyrrolidone (PVP), polyacrylonitrile (PAN) and also polycaprolactone (PCL) to yield hybrid membranes with the similar modification of surface and structure. Such versatile membrane filters can be purposely designed and scaled up, which endows the existing hybrid membrane with great potentials in both residential and public areas pollution control to achieve a healthier living environment.

Preparation of Polyvinyl Alcohol (PVA)-Based Composite Membranes Using Carboxyl-Type Boronic Acid Copolymers for Alkaline Diffusion Dialysis

Carboxyl-type boronic acid copolymers (CBACs) were synthesized by a radical polymerization method and used for the preparation of polyvinyl alcohol (PVA)-based composite membranes via a solution mixture method. The as-prepared composite membranes exhibited a water uptake (W_R) of 122.6–150.0%, an ion exchange capacity (IEC) of 0.0147–0.0518 mmol g⁻¹, and excellent mechanical (elongation at break (E_b) of 103.8–148.4%, tensile strength (TS) of 38.7–58.6 MPa) and thermal stability. The alkali resistances of the as-prepared membranes were tested by immersing the samples into 2 mol L⁻¹ NaOH solutions at 25 °C for 60 h, and the results were encouraging: the mass loss and swelling degree of the as-prepared membranes were in the ranges of 1.9–5.9% and 222.6–241.9%, respectively. The separation performances of the as-prepared membranes were evaluated by the diffusion dialysis (DD) process with an NaOH/Na₂WO₄ mixture at room temperature. The results demonstrated that the dialysis coefficients of hydroxide (U_OH) were in the range of 0.0147–0.0347 m h⁻¹, and the separation factors (S) were in the range of 29.5–62.6. The introduced carboxyl groups from CBACs and the –OH groups from PVA were both deemed to play significant roles in the promotion of ion transport: the –COO⁻ groups formed negatively charged transport channels for Na⁺ by electrostatic attraction, and the –OH groups promoted the transport of OH⁻ via hydrogen bonding.

The Impact of Reactive Ionic Liquids Addition on the Physicochemical and Sorption Properties of Poly(Vinyl Alcohol)-Based Films

A new type of hybrid polymeric-based film containing 1-(1,3-diethoxy-1,3-dioxopropan-2-ylo)-3-methylimidazolium bromide (RIL1_Br) and 1-(2-etoxy-2-oxoethyl)-3-methylimidazolium bromide (RIL2_Br) reactive ionic liquids was elaborated. Poly(vinyl alcohol) (PVA)-based films with 9–33 wt % of RILs were subsequently characterized using Fourier transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR), scanning electron microscopy (SEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA) and TGA-FTIR. PVA-RIL films were also studied in tensile tests, contact angle and sorption measurements. RIL incorporation enhanced thermal and mechanical stability of PVA membranes due to the hydrogen bonds between RILs and polymer chains. Membrane swelling behavior in water (H₂O), ethanol (EtOH), and propan-2-ol (IPA) and the kinetics of water sorption process revealed that PVA-RILs membranes possess the highest affinity towards water. It was pointed out that both the RIL type and the RIL amount in the polymer matrix have significant influence on the membrane swelling behavior and the water sorption kinetics.