Alginate-based membranes: Paving the way for green organic solvent nanofiltration

A portable stir-disc solid phase extraction using biochar/sodium alginate mixed matrix membrane as absorbent for bisphenols enrichment in water samples

Recently, we designed a novel portable stir-disc SPE device. Biochar/sodium alginate (SA) mixed matrix membrane (MMM) was introduced as stir-disc SPE adsorbents for the first time. The stir-disc SPE device efficiently and conveniently extracted bisphenol contaminants in water samples. The biochar/SA MMM exhibited satisfactory adsorption properties and excellent reusability. The established pretreatment method was then successfully applied to extract five traces of BPs in water samples. The targets were sensitively detected by a high-performance liquid chromatography/fluorescence detector (HPLC-FLD). The factors including exaction time, elution time, type and volume of elution solvent, and sample solution pH were thoroughly optimized. The methodology validation indicated that the limits of detection for the BPs ranged from 0.06 to 0.17 ng·mL-1. The correlation coefficient (R2) of linearity was 0.9959-0.9994. Satisfactorily, the recoveries of five BPs ranged from 71% to 108%, and the RSD was less than 13.3%. The proposed method was effectively applied to analyze BPs in tap water, drinking water, and river water samples. The results of recycling experiments revealed that the biochar/SA MMM had excellent reusability for analyzing BPs in water samples. Therefore, this study offered a new perspective on sample treatment.

Toward Molecular Simulation Guided Design of Next-Generation Membranes: Challenges and Opportunities

Membranes provide energy-efficient solutions for separating ions from water, ion-ion separation, neutral or charged molecules, and mixed gases. Understanding the fundamental mechanisms and design principles for these separation challenges has significant applications in the food and agriculture, energy, pharmaceutical, and electronics industries and environmental remediation. In situ experimental probes to explore Angstrom-nanometer length-scale and pico-nanosecond time-scale phenomena remain limited. Currently, molecular simulations such as density functional theory, ab initio molecular dynamics (MD), all-atom MD, and coarse-grained MD provide physics-based predictive models to study these phenomena. The status of molecular simulations to study transport mechanisms and state-of-the-art membrane separation is discussed. Furthermore, limitations and open challenges in molecular simulations are discussed. Finally, the importance of molecular simulations in generating data sets for machine learning and exploration of membrane design space is addressed.

Elimination of non-specific adsorption in the molecularly imprinted membrane: application for tetracycline detection

A vital challenge in using imprinted membranes for selective sensing is their non-specific adsorption (NSA). In this study, a novel, rapid, and green approach of NSA-free molecularly imprinted membrane (MIM) preparation was proposed. Sodium alginate was employed as a functional polymer (to interact with the template) and as a membrane matrix, then cross-linked with calcium before template removal to block the unreacted groups, followed by exposure to phosphate to chelate any remaining sites. Unlike the non-imprinted membrane (NIM), which is prepared similarly to MIM and lacks the template cavities, the MIM demonstrated exceptional imprinting factor (IF) (Q(NIM) ≈ 0 mg/g) compared to the initial IF of around 4 before NSA suppress, and a selectivity factor over 10 times greater than that of existing MIMs in the literature. The NSA-free MIM was used as a ready-to-use sensor for spectro-fluorescence and smartphone-based fluorescence detection of tetracycline (TC), achieving detection limits of 0.005 mg/L and 0.015 mg/L, respectively, which were below the maximal acceptable concentrations of TC in real samples. The detection of TC in milk and honey samples using the NSA-free MIM showed significant recoveries (86-101%) compared to those found by MIM before NSA supress (114-122%). The proposed methodology serves as an inspiration for extending NSA removal strategies to other MIMs based on various anionic polymers, including carboxylate, sulfonate, phosphonate, and phenolate anionic groups.

PEDOT:PSS Nanoparticle Membranes for Organic Solvent Nanofiltration

Recycling of valuable solutes and recovery of organic solvents via organic solvent nanofiltration (OSN) are important for sustainable development. However, the trade-off between solvent permeability and solute rejection hampers the application of OSN membranes. To address this issue, the poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) nanoparticle membrane with hierarchical pores is constructed for OSN via vacuum filtration. The small pores (the free volume of the polymer chain) charge for the solute rejection (high rejection efficiency for low molecule weight solute) and allow solvent passing while the large pores (the void between two PEDOT:PSS nanoparticles) promote the solvent transport. Owing to the lack of connectivity among the large pores, the fabricated PEDOT:PSS nanoparticle membrane enhanced solvent permeance while maintaining a high solute rejection efficiency. The optimized PEDOT:PSS membrane affords a MeOH permeance of 7.2 L m-2 h-1 bar-1 with over 90% rejection of organic dyes, food additives, and photocatalysts. Moreover, the rigidity of PEDOT endows the membrane with distinctive stability under high-pressure conditions. The membrane is used to recycle the valuable catalysts in a methanol solution for 150 h, maintaining good separation performance. Considering its high separation performance and stability, the proposed PEDOT:PSS membrane has great potential for industrial applications.

Pervaporation Membranes Based on Polyelectrolyte Complex of Sodium Alginate/Polyethyleneimine Modified with Graphene Oxide for Ethanol Dehydration

Pervaporation is considered the most promising technology for dehydration of bioalcohols, attracting increasing attention as a renewable energy source. In this regard, the development of stable and effective membranes is required. In this study, highly efficient membranes for the enhanced pervaporation dehydration of ethanol were developed by modification of sodium alginate (SA) with a polyethylenimine (PEI) forming polyelectrolyte complex (PEC) and graphene oxide (GO). The effect of modifications with GO or/and PEI on the structure, physicochemical, and transport characteristics of dense membranes was studied. The formation of a PEC by ionic cross-linking and its interaction with GO led to changes in membrane structure, confirmed by spectroscopic and microscopic methods. The physicochemical properties of membranes were investigated by a thermogravimetric analysis, a differential scanning calorimetry, and measurements of contact angles. The theoretical consideration using computational methods showed favorable hydrogen bonding interactions between GO, PEI, and water, which caused improved membrane performance. To increase permeability, supported membranes without treatment and cross-linked were developed by the deposition of a thin dense layer from the optimal PEC/GO (2.5%) composite onto a developed porous substrate from polyacrylonitrile. The cross-linked supported membrane demonstrated more than two times increased permeation flux, higher selectivity (above 99.7 wt.% water in the permeate) and stability for separating diluted mixtures compared to the dense pristine SA membrane.

Recent advances in the fabrication of organic solvent nanofiltration membranes using covalent/metal organic frameworks

Organic solvent nanofiltration (OSN) has evolved as a vital technological frontier with paramount significance in the separation and purification of organic solvents. Its implication is particularly prominent in industries such as pharmaceuticals, petrochemicals, and environmental remediation. This comprehensive review, meticulously navigates through the current state of research in OSN membranes, unveiling both the critical challenges and promising opportunities that beckon further exploration. The central focus of this review is on the unique utilization of covalent organic frameworks (COFs) and metal-organic frameworks (MOFs) in OSN membrane design, leveraging their distinctive structural attributes-tunable porosity, robust chemical stability, and molecular sieving capabilities. These qualities position them as exceptional candidates for crafting membranes tailored to the intricacies of organic solvent environments. Our investigation extends into the fundamental principles that render COFs and MOFs adept in OSN applications, dissecting their varied fabrication methods while offering insights into the advantages and limitations of each. Moreover, we address environmental and sustainability considerations in the use of COF and MOF-based OSN membranes. Furthermore, we meticulously present the latest advancements and innovations in this burgeoning field, charting a course toward potential future directions and emerging research areas. By underscoring the challenges awaiting exploration, this review not only provides a panoramic view of the current OSN landscape but also lays the groundwork for the evolution of efficient and sustainable OSN technologies, specifically harnessing the unique attributes of COFs and MOFs.

Self-assembled sodium alginate polymannuronate nanoparticles for synergistic treatment of ophthalmic infection and inflammation: Preparation optimization and in vitro/vivo evaluation

Frequent administrations are often needed during the treatment of ocular diseases due to the low bioavailability of the existing eye drops owing to inadequate corneal penetration and rapid drug washout. Herein, sodium alginate polymannuronate (SA) nanocarriers were developed using ionic gelation method that can provide better bioavailability through mucoadhesivity and sustained drug release by binding to the ocular mucus layer. This study disproves the common belief that only the G block of SA participates in the crosslinking reaction during ionic gelation. Self-assembly capability due to the linear flexible structure of the M block, better biocompatibility than G block along with the feasibility of controlling physicochemical characteristics postulate a high potential for designing efficient ocular drug delivery systems. Initially, four crosslinkers of varied concentrations were investigated. Taguchi design of experiment revealed the statistically significant effect of the crosslinker type and concentration on the particle size and stability. The best combination was detected by analyzing the particle size and zeta potential values that showed the desired microstructural properties for ocular barrier penetration. The desired combination was SA-Ca-1 that had particle size within the optimal corneal penetration range, that is 10-200 nm (135 nm). The drug carriers demonstrated excellent entrapment efficiency (∼89 % for Ciprofloxacin and ∼96 % for Dexamethasone) along with a sustained and simultaneous release of dual drug for at least 2 days. The nanoparticles also showed biocompatibility (4 ± 0.6 % hemolysis) and high mucoadhesivity (73 ± 2 % for 0.25 g) which was validated by molecular docking analysis. The prepared formulation was able to reduce the scleral inflammation of the rabbit uveitis models significantly within 3 days. Thus, the eye drop showed remarkable potential for efficient drug delivery leading to faster recovery.

Whether membranes developed for organic solvent nanofiltration (OSN) tend to be hydrophilic or hydrophobic? ── a review

In the past few decades, organic solvent nanofiltration (OSN) has attracted numerous researchers and broadly applied in various fields. Unlike conventional nanofiltration, OSN always faced a broad spectrum of solvents including polar solvents and non-polar solvents. Among those recently developed OSN membranes in lab-scale or widely used commercial membranes, researchers preferred to explore intrinsic materials or introduce nanomaterials into membranes to fabricate OSN membranes. However, the hydrophilicity of the membrane surface towards filtration performance was often ignored, which was the key factor in conventional aqueous nanofiltration. The influence of surface hydrophilicity on OSN performance was not studied systematically and thoroughly. Generally speaking, the hydrophilic OSN membranes performed well in the polar solvents while the hydrophobic OSN membranes work well in the non-polar solvent. Many review papers reviewed the basics, problems of the membranes, up-to-date studies, and applications at various levels. In this review, we have focused on the relationship between the surface hydrophilicity of OSN membranes and OSN performances. The history, theory, and mechanism of the OSN process were first recapped, followed by summarizing representative OSN research classified by surface hydrophilicity and types of membrane, which recent OSN research with its contact angles and filtration performance were listed. Finally, from the industrialization perspective, the application progress of hydrophilic and hydrophobic OSN membranes was introduced. We started with history and theory, presented many research and application cases of hydrophilic and hydrophobic OSN membranes, and discussed anticipated progress in the OSN field. Also, we pointed out some future research directions on the hydrophilicity of OSN membranes to deeply develop the effect made by membrane hydrophilicity on OSN performance for future considerations and stepping forward of the OSN industry.

Carbon-doped metal oxide interfacial nanofilms for ultrafast and precise separation of molecules

Membranes with molecular-sized, high-density nanopores, which are stable under industrially relevant conditions, are needed to decrease energy consumption for separations. Interfacial polymerization has demonstrated its potential for large-scale production of organic membranes, such as polyamide desalination membranes. We report an analogous ultrafast interfacial process to generate inorganic, nanoporous carbon-doped metal oxide (CDTO) nanofilms for precise molecular separation. For a given pore size, these nanofilms have 2 to 10 times higher pore density (assuming the same tortuosity) than reported and commercial organic solvent nanofiltration membranes, yielding ultra-high solvent permeance, even if they are thicker. Owing to exceptional mechanical, chemical, and thermal stabilities, CDTO nanofilms with designable, rigid nanopores exhibited long-term stable and efficient organic separation under harsh conditions.

Green and Sustainable Membranes: A review

Membranes are ubiquitous tools for modern water treatment technology that critically eliminate hazardous materials such as organic, inorganic, heavy metals, and biomedical pollutants. Nowadays, nano-membranes are of particular interest for myriad applications such as water treatment, desalination, ion exchange, ion concentration control, and several kinds of biomedical applications. However, this state-of-the-art technology suffers from some drawbacks, e.g., toxicity and fouling of contaminants, which makes the synthesis of green and sustainable membranes indeed safety-threatening. Typically, sustainability, non-toxicity, performance optimization, and commercialization are concerns centered on manufacturing green synthesized membranes. Thus, critical issues related to toxicity, biosafety, and mechanistic aspects of green-synthesized nano-membranes have to be systematically and comprehensively reviewed and discussed. Herein we evaluate various aspects of green nano-membranes in terms of their synthesis, characterization, recycling, and commercialization aspects. Nanomaterials intended for nano-membrane development are classified in view of their chemistry/synthesis, advantages, and limitations. Indeed, attaining prominent adsorption capacity and selectivity in green-synthesized nano-membranes requires multi-objective optimization of a number of materials and manufacturing parameters. In addition, the efficacy and removal performance of green nano-membranes are analyzed theoretically and experimentally to provide researchers and manufacturers with a comprehensive image of green nano-membrane efficiency under real environmental conditions.

The Development of Alginate/Ag NPs/Caffeic Acid Composite Membranes as Adsorbents for Water Purification

Since the water pollution problem still affects the environmental system and human health, the need to develop innovative membranes has become imperious. Lately, researchers have focused on developing novel materials to help diminish the contamination problem. The aim of present research was to obtain innovative adsorbent composite membranes based on a biodegradable polymer, alginate, to remove toxic pollutants. Of all pollutants, lead was chosen due to its high toxicity. The composite membranes were successfully obtained through a direct casting method. The silver nanoparticles (Ag NPs) and caffeic acid (CA) from the composite membranes were kept at low concentrations, which proved enough to bestow antimicrobial activity to the alginate membrane. The obtained composite membranes were characterised by Fourier transform infrared spectroscopy and microscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetric analysis (TG-DSC). Swelling behaviour, lead ion (Pb²⁺) removal capacity, regeneration and reusability were also determined. Further, the antimicrobial activity was tested against selected pathogenic strains (S. aureus, E. faecalis sp., P. aeruginosa, E. coli and C. albicans). The presence of Ag NPs and CA improves the antimicrobial activity of the newly developed membranes. Overall, the composite membranes are suitable for complex water treatment (removal of heavy metal ions and antimicrobial treatment).

Eco-Friendly OSN Membranes Based on Alginate Salts with Variable Nanofiltration Properties

In this work, membranes for organic solvents nanofiltration (OSN) based on a natural polymer, sodium alginate, were fabricated. They are chemically stable in organic solvents, including aprotic polar solvents. The unique advantage of these membranes is the absence of toxic reagents and solvents during their production. This ensures the safety and environmental friendliness of the production process. It has been shown that an operation as simple as changing the cation in alginate (Cu²⁺, Fe³⁺, Cr³⁺, Al³⁺, Zn²⁺, Ca²⁺) makes it possible to control the transport and separating properties of membranes, depending on the organic solvent being separated. Therefore, to isolate RemazolBrilliant Blue with MM = 626 g·mol^-1 from ethanol, membranes based on iron alginate with a rejection R = 97% and a permeability of 1.5 kg·m^-2·h^-1·bar^-1 are the most efficient. For isolation of the same solute from DMF and MP, membranes based on calcium alginate with an R of about 90% and a permeability of 0.1-0.2 kg·m^-2·h^-1·bar^-1 are the most efficient. The resulting membranes based on natural biodegradable sodium alginate are competitive compared to membranes based on synthetic polymers.

Fine-tuning of carbon nanostructures/alginate nanofiltration performance: Towards electrically-conductive and self-cleaning properties

Electrically-conductive membranes became the center of attention owing to their enhanced ion selectivity and self-cleaning properties. Carbon nanostructures (CNS) attain high electrical conductivity, and fast water transport. Herein, we adopt a water-based, simple method to entrap CNS within Alginate network to fabricate self-cleaning nanofiltration membranes. CNS are embedded into membranes to improve the swelling/shrinkage resistivity, and to achieve electrical-conductivity. The CaAlg PEG-formed pores are tuned by organic-inorganic network via silane crosslinking. Flux/rejection profiles of Na₂SO₄ are studied/optimized in reference to fabrication parameters. 90% Na₂SO₄ rejection (7 LMH) is achieved for silane-CaAlg₂₀₀-10% CNS membranes. Membranes exhibit outstanding electrical conductivity (∼2858 S m^-1), which is attractive for fouling control. CaAlg/CNS membranes are tested to treat dye/saline water via two-stage filtration, namely, dye/salt separation and desalination. A successful dye/salt separation is achieved at the first stage with a rejection of 100%-RB and only 3.1% Na₂SO₄, and 54% Na₂SO₄ rejection in the second stage.

Shifting to transparent/hazy properties: The case of alginate/network cellulose all-polysaccharide composite films

Light management films emerged entirely from natural polymers with tunable haze properties are developed via facile approach for optoelectronics application. A novel green method simply based on the blending of network cellulose (NC)/water suspension with alginate aqueous solution is proposed. The unique network cellulose suspension created by a controlled hydrolysis of microcrystalline cellulose acts as the scatterer media while alginate serves as the transparent host matrix. Network cellulose features isotropic intertwined network of nanofibers that contributes to light scatting and produce optical haze. The opaque but hazy network cellulose is dispersed purposefully in the alginate film, where its original properties are preserved owing to its poor solubility in water. Additionally, the dispersion will notably increase the roughness of the composite film surface and act as a light scatterer. Eventually, composite alginate/network cellulose (CaAlg/NC) film with high transparency (>94%) and customized haze (15-73%) at 550 cm^-1 wavelength is fabricated. Herein, we successfully combine the transparent alginate with the opaque but hazy "network cellulose" of uniformly distributed nanofibers by a facile and scalable blending to fabricate transparent and hazy all-natural composite films. The fabricated all-polysaccharide films exhibited high transparency with tailored transmission haze. The film is highly fitting for large-scale production and adequate to meet different haze requirements to accommodate different applications such as privacy protection films and antiglare/antireflection coatings. This article is protected by copyright. All rights reserved.

Atomic Force Microscopy (AFM) on Biopolymers and Hydrogels for Biotechnological Applications-Possibilities and Limits

Atomic force microscopy (AFM) is one of the microscopic techniques with the highest lateral resolution. It can usually be applied in air or even in liquids, enabling the investigation of a broader range of samples than scanning electron microscopy (SEM), which is mostly performed in vacuum. Since it works by following the sample surface based on the force between the scanning tip and the sample, interactions have to be taken into account, making the AFM of irregular samples complicated, but on the other hand it allows measurements of more physical parameters than pure topography. This is especially important for biopolymers and hydrogels used in tissue engineering and other biotechnological applications, where elastic properties, surface charges and other parameters influence mammalian cell adhesion and growth as well as many other effects. This review gives an overview of AFM modes relevant for the investigations of biopolymers and hydrogels and shows several examples of recent applications, focusing on the polysaccharides chitosan, alginate, carrageenan and different hydrogels, but depicting also a broader spectrum of materials on which different AFM measurements are reported in the literature.

Recovery of Model Pharmaceutical Compounds from Water and Organic Solutions with Alginate-Based Composite Membranes

In this work, we combined the non-solvent induced phase separation (NIPS) and further cross-linking by cations towards the preparation of nanofiltration membranes based on sodium alginate, a biodegradable, natural polymer. Acetone, ethanol, toluene, and hexane were used as non-solvents, and cations of calcium, silver, and aluminum—for polymer cross-linking, respectively. Results showed the precipitation strength of non-solvent played a noticeable role in the membrane’s performance; for instance, the toluene permeability changed by four orders of magnitude with the decrease of precipitation strength of the non-solvent: acetone (P_toluene = 0.1 kg∙m⁻²∙h⁻¹∙bar⁻¹) < ethanol (3 kg∙m⁻²∙h⁻¹∙bar⁻¹) < hexane (41 kg∙m⁻²∙h⁻¹∙bar⁻¹) < toluene (415 kg∙m⁻²∙h⁻¹∙bar⁻¹). It was shown that simultaneous precipitation and crosslinking in aqueous solutions AlCl₃ or AgNO₃ must be used in the preparation of alginate membranes for the highly selective recovery of pharmaceutical compounds from organic media. These membranes show rejection R = 90–93% of substances with MW = 626 g/mol and ethanol permeability P_EtOH = 1.5–2.5 kg∙m⁻²∙h⁻¹∙bar⁻¹. For the highly selective recovery of pharmaceutical compounds from water, the method of obtaining membranes must be changed. Precipitation in toluene and then crosslinking in aqueous solutions of AlCl₃ or AgNO₃ must be used sequentially instead of simultaneous precipitation and crosslinking in aqueous solutions of the same inorganic salts. The permeability of such membranes varied from 0.44 to 7.8 kg∙m⁻²∙h⁻¹∙bar⁻¹ depending on the crosslinking cation in the alginate. The rejection of model substances with MW 350 and 626 g/mol were on the level of 99%. Alginate membranes can be used to solve separation problems in the pharmaceutical field, for example, to isolate antibiotics from their extractants and remove the same antibiotics from aqueous pharmaceutical waste to prevent their accumulation in the environment and the emergence of resistant genes and bacteria.

High-performance TFNC membrane with adsorption assisted for removal of Pb(II) and other contaminants

Rapid and thorough removal of heavy metal ions in wastewater is critical for the urgent need of clean water. Herein, we prepared a high-performance thin film nanofibrous composite (TFNC) membrane consisting of a polyacrylonitrile (PAN)-UiO-66-(COOH)₂ composite nanofibrous substrate (CPAN) and a calcium alginate (CaAlg) skin layer. Owing to abundant adsorption sites of UiO-66-(COOH)₂ MOF, the optimal CPAN-2 nanofibrous substrate showed excellent adsorption capacity for lead ions. The maximum Pb²⁺ adsorption capacity of CPAN-2 substrate calculated by Langmuir isotherm model was 254.5 mg/g. Meanwhile, due to the relatively loose structure of CaAlg skin layer, this TFNC membrane showed high water permeate flux about 50 L m^-2h^-1 at 0.1 MPa, and the rejection for dyes was higher than 95%. Therefore, CaAlg/CPAN TFNC membranes were appropriate for dynamic adsorption/filtration to remove Pb²⁺. Compared with original CaAlg/PAN membrane, the optimal CaAlg/CPAN TFNC membrane showed much better ability to treat Pb(II)-containing wastewater and had good recyclability. Most importantly, the CaAlg/CPAN TFNC membrane could treat 7659 L m^-2 wastewater containing single lead ions under WHO drinking water standard, and effectively deal with more simulated lead-containing wastewater. This work could provide a substitutable solution for effective removal of heavy metal ions and other various contaminants in wastewater.

Evaluation of Calcium Alginate-Based Biopolymers as Potential Component of Membranes for Recovering Biosurfactants from Corn Steep Water

Corn steep water (CSW) is a complex agro-food stream that is used as a source of cost-competitive biosurfactants, since they are produced spontaneously in the steeping process of corn, avoiding production costs. Nevertheless, the extraction of biosurfactants from CSW using sustainable processes is still a challenge. Consequently, the use of calcium alginate membranes could present a novel and sustainable technology for recovering biosurfactants from aqueous streams. Therefore, the aim of this work is to evaluate calcium alginate-based biopolymers, without and with the presence of grape marc as an additive, as a key component of membranes for the recovery of biosurfactants in corn steep water. Biosurfactants are present in CSW, together with other inorganic solutes and biomolecules, such as organic acids, sugars, cations, anions as well as metals. Hence, the competition of these mentioned compounds for the active sites of the calcium alginate-based biopolymers was high. However, they showed a good adsorption capacity for biosurfactants, recovering around 55 ± 2% and 47 ± 1%, of biosurfactants from CSW using both calcium alginate-based biopolymers, with and without biodegraded grape marc. Regarding adsorption capacity, it was 54.8 ± 0.6 mg biosurfactant/g bioadsorbent for the biopolymer containing grape marc, and 46.8 ± 0.4 mg biosurfactant/g bioadsorbent for the calcium alginate-based biopolymer alone. Based on these results, it could be postulated that the formulation of green membranes, based on calcium alginate-based polymers, could be an interesting alternative for the recovery of biosurfactants from aqueous streams including CSW.

Novel Pervaporation Membranes Based on Biopolymer Sodium Alginate Modified by FeBTC for Isopropanol Dehydration

Modern society strives for the development of sustainable processes that are aimed at meeting human needs while preserving the environment. Membrane technologies satisfy all the principles of sustainability due to their advantages, such as cost-effectiveness, environmental friendliness, absence of additional reagents and ease of use compared to traditional separation methods. In the present work, novel green membranes based on sodium alginate (SA) modified by a FeBTC metal–organic framework were developed for isopropanol dehydration using a membrane process, pervaporation. Two kinds of SA-FeBTC membranes were developed: (1) untreated membranes and (2) cross-linked membranes with citric acid or phosphoric acid. The structural and physicochemical properties of the developed SA-FeBTC membranes were studied by spectroscopic techniques (FTIR and NMR), microscopic methods (SEM and AFM), thermogravimetric analysis and swelling experiments. The transport properties of developed SA-FeBTC membranes were studied in the pervaporation of water–isopropanol mixtures. Based on membrane transport properties, 15 wt % FeBTC was demonstrated to be the optimal content of the modifier in the SA matrix for the membrane performance. A membrane based on SA modified by 15 wt % FeBTC and cross-linked with citric acid possessed optimal transport properties for the pervaporation of the water–isopropanol mixture (12–100 wt % water): 174–1584 g/(m2 h) permeation flux and 99.99 wt % water content in the permeate.

Sustainable Fabrication of Organic Solvent Nanofiltration Membranes

Organic solvent nanofiltration (OSN) has been considered as one of the key technologies to improve the sustainability of separation processes. Recently, apart from enhancing the membrane performance, greener fabricate on of OSN membranes has been set as a strategic objective. Considerable efforts have been made aiming to improve the sustainability in membrane fabrication, such as replacing membrane materials with biodegradable alternatives, substituting toxic solvents with greener solvents, and minimizing waste generation with material recycling. In addition, new promising fabrication and post-modification methods of solvent-stable membranes have been developed exploiting the concept of interpenetrating polymer networks, spray coating, and facile interfacial polymerization. This review compiles the recent progress and advances for sustainable fabrication in the field of polymeric OSN membranes.