Designing nanofiltration hollow fiber membranes based on dynamic deposition technology

Novel Thin Film Nanocomposite Membranes Based on Chitosan Succinate Modified with Fe-BTC for Enhanced Pervaporation Dehydration of Isopropanol

The application of environmentally friendly and energy-efficient membrane processes allows improvement the ecological safety and sustainability of industrial production. However, the effective application of membrane processes requires novel high-performance thin film composite (TFC) membranes based on biopolymers to solve environmental problems. In this work for the first time novel thin film nanocomposite (TFN) membranes based on biopolymer chitosan succinate (ChS) modified with the metal organic framework iron 1,3,5-benzenetricarboxylate (Fe-BTC) were developed for enhanced pervaporation dehydration. The formation of a selective layer of TFN membranes on the porous membrane-support was carried out by two methods—dynamic technique and physical adsorption. The effect of the membrane formation method and Fe-BTC content in ChS layer on the structure and physicochemical properties of TFN membranes was investigated. The developed TFN ChS-based membranes were evaluated in the pervaporation dehydration of isopropanol (12–30 wt.% water). It was found that TFN ChS-Fe-BTC membranes prepared by two methods demonstrated improved permeation flux compared to the reference TFC ChS membrane. The best transport properties in pervaporation dehydration of isopropanol (12–30 wt.% water) were possessed by TFN membranes with 40 wt.% Fe-BTC prepared by dynamic technique (permeation flux 99–499 g m−2 h−1 and 99.99% water in permeate) and TFN membranes with 5 wt.% Fe-BTC developed by physical adsorption (permeation flux 180–701 g m−2 h−1 and 99.99% water in permeate).

State-of-the-Art Organic- and Inorganic-Based Hollow Fiber Membranes in Liquid and Gas Applications: Looking Back and Beyond

The aggravation of environmental problems such as water scarcity and air pollution has called upon the need for a sustainable solution globally. Membrane technology, owing to its simplicity, sustainability, and cost-effectiveness, has emerged as one of the favorable technologies for water and air purification. Among all of the membrane configurations, hollow fiber membranes hold promise due to their outstanding packing density and ease of module assembly. Herein, this review systematically outlines the fundamentals of hollow fiber membranes, which comprise the structural analyses and phase inversion mechanism. Furthermore, illustrations of the latest advances in the fabrication of organic, inorganic, and composite hollow fiber membranes are presented. Key findings on the utilization of hollow fiber membranes in microfiltration (MF), nanofiltration (NF), reverse osmosis (RO), forward osmosis (FO), pervaporation, gas and vapor separation, membrane distillation, and membrane contactor are also reported. Moreover, the applications in nuclear waste treatment and biomedical fields such as hemodialysis and drug delivery are emphasized. Subsequently, the emerging R&D areas, precisely on green fabrication and modification techniques as well as sustainable materials for hollow fiber membranes, are highlighted. Last but not least, this review offers invigorating perspectives on the future directions for the design of next-generation hollow fiber membranes for various applications. As such, the comprehensive and critical insights gained in this review are anticipated to provide a new research doorway to stimulate the future development and optimization of hollow fiber membranes.

Analysis of Mg2+/Li+ separation mechanism by charged nanofiltration membranes: visual simulation

The mechanism of the nanofiltration (NF) membrane separation of Mg²⁺ and Li⁺ needs to be further investigated, but some commonly used model theories are abstract, which makes them difficult to understand. More importantly, the relationship between the membrane charge and separation performance of Mg²⁺ and Li⁺ cannot be quantitatively analyzed. It is worth studying these challenges and providing a performance boost for Mg²⁺/Li⁺ filtration applications of NF membranes. Here, various NF membranes, with the membrane volumetric charge density increasing from -4.69 to 7.02 mol · m^-3, were fabricated via interfacial polymerization. For these membranes, the separation factor S _Mg,Li was decreased from 0.41 to 0.20. Importantly, the visual simulation results were consistent with the experimental results as a whole. The separation factor S _Mg,Li decreased with the increase of volumetric charge density, and the minimum separation factor S _Mg,Li of the NF membranes was 0.20 (experiment) and 0.17 (simulation), respectively. This meant that the performance of the positively charged NF membrane was not fully developed. Furthermore, we analyzed the relationship between the membrane charge and separation performance, and visualized the simulation of the NF membrane filtration and separation.