Polyethyleneimine/4,4′-Bis(chloromethyl)-1,1′-biphenyl nanofiltration membrane for metal ions removal in acid wastewater

A novel trimesoyl chloride/hyper branched polyethyleneimine/MOF (MIL-303)/P84 co-polyimide nanocomposite mixed matrix membranes with an ultra-thin surface cross linking layer for removing toxic heavy metal ions from wastewater

In this study, a positively charged nanofiltration (NF) nanocomposite mixed matrix membrane (MMM) was developed by incorporating metal-organic frameworks (MOFs) (MIL-303) into P84 co-polyimide and cross-linking with hyperbranched polyethyleneimine (HPEI). A very thin selective layer was subsequently formed on the cross-linked membrane surface using trimesoyl chloride (TMC). The incorporation of MIL-303 introduced specific water channels, enhancing the permeance of the nanocomposite MMMs. Additionally, it improved hydrophilicity and influenced the diffusion of the TMC monomer through the channels. The cross-linker HPEI resulted in NF membranes with increased electro-positivity and a reduced mean pore diameter. The very thin crosslinked TMC layer further improved permeance and heavy metal ions rejection of the membrane. This optimized membrane exhibited excellent rejection for both bivalent and monovalent ions, as well as heavy metal ions, effectively overcoming the common trade-off between permeance and rejection in NF membranes. The membrane demonstrated a remarkable permeance of 13.0 LMH/bar, coupled with exceptional rejection for heavy metal ions (96.8 % for Zn²⁺, 95.2 % for Ni²⁺, 95.7 % for Cu²⁺, 93.2 % for Pb²⁺, and 92.9 % for Cd²⁺). The TMC/HPEI/MIL-303/P84 system presented in this study holds significant promise for customizing high-performance positively charged NF membranes for the removal of heavy metal ions from wastewater.

Integrating Ultrafiltration Membranes with Flocculation and Activated Carbon Pretreatment Processes for Membrane Fouling Mitigation and Metal Ion Removal from Wastewater

The presence of metal ions in an aqueous medium is an ongoing challenge throughout the world. Processes employed for metal ion removal are developed continuously with the integration of these processes taking center stage. Herein, an integrated system consisting of flocculation, activated carbon (AC), and an ultrafiltration (UF) membrane was assessed for the removal of multiple metal ions contained in wastewater generated from a university chemistry research laboratory. The quality of the wastewater was established before and further determined after treatment with inductively coupled plasma optical emission spectrometry (ICP-OES) for metal content, total dissolved solids (TDS), turbidity, electrical conductivity (EC), and pH. Assessing the spent AC indicated minimal structural changes, indicating a potential for further reuse; for instance, the BET for both the pristine and spent AC exhibited type I isotherms with a mesoporous structure, indicating no major structural changes due to metal complexation. The relative performance of the integrated system indicated that the use of flocculation improved the water quality of metal-laden wastewater for safe disposal. The integrated treatment systems exhibited high removal efficiencies between 80 and 99.99% for all the metal ions except for Mn (<0.008 mg L^-1) and Cr (<0.016 mg L^-1) both at ca. 70%, indicative of the positive influence of the polyelectrolyte in the treatment process. The fabricated UiO-66-NH₂@GO membranes (Z4 and Z5) exhibited high fouling resistance and reusability potential as well as relatively high pure water flux. Consequently, the integrated process employed for the treatment of laboratory metal-containing wastewater is promising as a generic approach to improving the quality of metal-containing wastewater to meet the standards of discharging limits in South Africa.

Reduction of Ultrafiltration Membrane Fouling by the Pretreatment Removal of Emerging Pollutants: A Review

Ultrafiltration (UF) processes exhibit high removal efficiencies for suspended solids and organic macromolecules, while UF membrane fouling is the biggest obstacle affecting the wide application of UF technology. To solve this problem, various pretreatment measures, including coagulation, adsorption, and advanced oxidation, for application prior to UF processes have been proposed and applied in actual water treatment processes. Previously, researchers mainly focused on the contribution of natural macromolecular pollutants to UF membrane fouling, while the mechanisms of the influence of emerging pollutants (EPs) in UF processes (such as antibiotics, microplastics, antibiotic resistance genes, etc.) on membrane fouling still need to be determined. This review introduces the removal efficiency and separation mechanism for EPs for pretreatments combined with UF membrane separation technology and evaluates the degree of membrane fouling based on the UF membrane's materials/pores and the structural characteristics of the cake layer. This paper shows that the current membrane separation process should be actively developed with the aim of overcoming specific problems in order to meet the technical requirements for the efficient separation of EPs.

Preparation of Porous Silicate Cement Membranes via a One-Step Water-Based Hot-Dry Casting Method

A commercial interest in the improvement in the separation performance and permeability of porous materials is driving efforts to deeply explore new preparation methods. In this study, the porous silicate cement membranes (PSCMs) were successfully prepared through an adjustable combination of hot-dry casting and a cement hydration process. The obtained membrane channel was unidirectional, and the surface layer was dense. The physical characteristics of the PSCMs including their pore morphology, porosity, and compressive strength, were diversified by adjusting the solid content and hot-dry temperature. The results indicated that with the solid content increasing from 40 wt. % to 60 wt. %, the porosity decreased by 8.07%, while the compressive strength improved by 12.46%. As the hot-dry temperature increased from 40 °C to 100 °C, the porosity improved by 23.04% and the BET specific surface area and total pore volume enlarged significantly, while the compressive strength decreased by 27.03%. The pore size distribution of the PSCMs exhibited a layered structure of macropores and mesopores, and the pore size increased with the hot-dry temperature. Overall, the PSCMs, which had typical structures and adjustable physical characteristics, exhibited excellent permeability and separation performance.

Ultrafast and efficient removal of Pb(II) from acidic aqueous solution using a novel polyvinyl alcohol superabsorbent

The direct removal of heavy metal ions from acidic wastewater is a hard problem. In this study, a novel superabsorbent, polyvinyl alcohol phosphate ester (PVAP), was designed and prepared to remove Pb(II) from acidic wastewater (pH = 3). The PVAP can absorb water and swell to reach equilibrium within 30 s, which provides the conditions for ultrafast kinetic adsorption. For 100 mg/L Pb(II) solution, the adsorption reaches equilibrium within 5 min, and the removal ratio is more than 99.9% over a wide pH range of 3-6. Adsorption kinetics and isotherm data are consistent with pseudo-second-order and Langmuir model, respectively. The calculated maximum adsorption capacity for Pb(II) is 558.66 mg/g. Thermodynamic results show that the adsorption is spontaneous and exothermic process. The removal ratio for Pb(II) of PVAP still maintains above 99% after ten recycles. The PVAP can also simultaneously remove more than 97% of other heavy metal ions (Cu(II), Cd(II), Zn(II), Co(II), and Ni(II)) from an acidic solution. Moreover, the PVAP can efficiently purify simulated acid mine heavy metal wastewater, and the results meet EPA drinking water standards. The studies of X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) spectroscopy prove that the adsorption mechanism involves surface complexation. This new superabsorbent is a promising candidate for acidic heavy metal sewage disposal.

Detection of Cu2+ and S2- with fluorescent polymer nanoparticles and bioimaging in HeLa cells

Novel spherical polymer nanoparticles were synthesized by hyperbranched polyethylenimine (hPEI) and 6-hydroxy-2-naphthaldehyde (HNA) via Schiff base reaction (one-pot reaction), which had great advantages in water solubility and green synthesis. Meanwhile, probe PEI-HNA could quickly detect Cu²⁺ in the range of 0-60 μM in 30 s with the detection limit of 243 nM. The fluorescence of PEI-HNA-Cu²⁺ could be recovered by the addition of S^2- in 50 s with the detection limit of 227 nM. Based on the excellent optical properties, PEI-HNA has been used in the bioimaging of living cells with excellent cell penetrability and low toxicity. More importantly, PEI-HNA has been doped into filter paper, hydrogel, and nanofibrous film to prepare solid-phase sensors, displaying rapid response and excellent sensitivity. Moreover, the low-cost and simple preparation of these sensors offers great potential and possibilities for industrialization, which could help accelerate the development of sensors in environmental and biological fields.